Microchip PM8055B-FEI
Interface - I/O Expanders SXP 48x12G
ブランド: Microchip Technology, Inc
製造元部品 #: PM8055B-FEI
データシート: PM8055B-FEI Datasheet (PDF)
パッケージ/ケース: -
製品の種類: インターフェイスIC
特徴
- SAS-3 T10 zoning for secure storage
- Ultra low switching latency for improved system performance
- SAS and SATA edge-buffering preserves customers’ investment by improving performance with existing 3G and 6G drives
- Table-to-table routing removes need for keyed connectors
- Integrated Ethernet port for seamless interface to management entity
- Integrated MIPS processor for enclosure management
- Firmware compatible with Microchip SAS 3 Gbps and 6 Gbps SAS expanders and stand-alone enclosure management controllers
- 12G SAS signaling support for up to 10m mini-SAS HD passive copper cable
- Optical SAS support
- Early power off warning (EPOW) support
- SAS and SATA edge-buffering support
- Ultra-low switching latency to improve system performance
- Quad SPI or parallel flash support; optional inline ECC on the parallel flash
- T10 zoning support (up to 256 zones)
- Port mirroring for system debug
- Local bus data integrity protection
- Real-time eye capture with enhanced BER eye mask and estimation
- Non-disruptive zero down time firmware update support
- Position-independent firmware image support to simplify firmware image management/download
- Compatible enclosure management firmware architecture with SXP 3G/6G products
- Real-time clock (1 µS counter up to 35+ years)
- Enhanced processing subsystem (MIPS 34Kc at 600 MHz)
- Backward-compatibility with Microchii’s 6G/3G SXP devices
- High-Speed I/O
- SAS-3 (12 Gbps, 6 Gbps, 3 Gbps, 1.5 Gbps) and SATA-3 (6 Gbps, 3 Gbps, 1.5 Gbps) operation
- Support for up to 4K SAS addresses
- Automated decision feedback equalizer (DFE) per SAS-3
- Programmable continuous time linear equalizer for SATA-3
- Supports spread-spectrum clocking (SSC) per SAS/SATA-3
- Per-PHY configurable transmit and receive SSC
- Per-PHY programmable transmit amplitude and emphasis
- Integrated resistive termination
- SAS 3.0-compliant back-channel training (SAS3 speed negotiation)Peripheral Interfaces
- Peripheral Interfaces
- 4 UART interfaces for system monitoring and debugging
- 4 SGPIO interfaces (or additional TWI per SFF-8448)
- Up to 81 GPIO pins
- Eight dedicated two-wire interfaces (up to twelve total) for device configuration and control of external interfaces
- 16-bit local bus interface for connecting to NOR flash and SRAM
- SPI, DSPI, and QSPI interface
- 10/100 Ethernet MAC port
- JTAG and EJTAG interface
- Statistics and Performance Monitoring
- Per-port error counters for comprehensive diagnostic capability
- Programmable PMON counters and interrupt generation
- Per-link PRBS and CJPAT pattern generators and loop-backs for linkintegrity diagnostics
- Real-time clock
- Firmware Development Kit
- Zoning configuration interface
- SAM4/SPC4/SES3-compatible SES target with Enclosure Management Application reference design
- SAS-3-compatible protocol stack in virtual SAS/SMP port
- SSP/STP Initiator API supports communication with SSP/STP targets over SAS links
- SMP routing management including topology discovery
- Firmware download over multiple in-band and out-of-band interfaces
- Expander diagnostics API
- Disk spin-up control and disk qualification API
- Peripheral drivers for TWI, UART, SGPIO, and Ethernet interfaces
- TCP/IP enables management of the SXP 12G through remote network
- Error detection, logging, and reporting
- Wake up system through Ethernet or SAS port
- Chiplink Diagnostic Utility
- Supports advanced features for validation, characterization, and debugging of Microchip expanders
- Includes full SAS tool suite and a macro interface for user-authored animation scripts
- Third Party Support
- Green Hills MULTI development environment and EJTAG debugger
- SAS-3 (12 Gbps, 6 Gbps, 3 Gbps, 1.5 Gbps) and SATA-3 (6 Gbps, 3 Gbps, 1.5 Gbps) operation
- Support for up to 4K SAS addresses
- Automated decision feedback equalizer (DFE) per SAS-3
- Programmable continuous time linear equalizer for SATA-3
- Supports spread-spectrum clocking (SSC) per SAS/SATA-3
- Per-PHY configurable transmit and receive SSC
- Per-PHY programmable transmit amplitude and emphasis
- Integrated resistive termination
- SAS 3.0-compliant back-channel training (SAS3 speed negotiation)Peripheral Interfaces
- 4 UART interfaces for system monitoring and debugging
- 4 SGPIO interfaces (or additional TWI per SFF-8448)
- Up to 81 GPIO pins
- Eight dedicated two-wire interfaces (up to twelve total) for device configuration and control of external interfaces
- 16-bit local bus interface for connecting to NOR flash and SRAM
- SPI, DSPI, and QSPI interface
- 10/100 Ethernet MAC port
- JTAG and EJTAG interface
- Per-port error counters for comprehensive diagnostic capability
- Programmable PMON counters and interrupt generation
- Per-link PRBS and CJPAT pattern generators and loop-backs for linkintegrity diagnostics
- Real-time clock
- Zoning configuration interface
- SAM4/SPC4/SES3-compatible SES target with Enclosure Management Application reference design
- SAS-3-compatible protocol stack in virtual SAS/SMP port
- SSP/STP Initiator API supports communication with SSP/STP targets over SAS links
- SMP routing management including topology discovery
- Firmware download over multiple in-band and out-of-band interfaces
- Expander diagnostics API
- Disk spin-up control and disk qualification API
- Peripheral drivers for TWI, UART, SGPIO, and Ethernet interfaces
- TCP/IP enables management of the SXP 12G through remote network
- Error detection, logging, and reporting
- Wake up system through Ethernet or SAS port
- Supports advanced features for validation, characterization, and debugging of Microchip expanders
- Includes full SAS tool suite and a macro interface for user-authored animation scripts
- Green Hills MULTI development environment and EJTAG debugger
仕様
パラメータ | 価値 | パラメータ | 価値 |
---|---|---|---|
feature-maximum-operating-supply-voltage-v | feature-process-technology | ||
feature-minimum-operating-supply-voltage-v | feature-packaging | ||
feature-rad-hard | feature-pin-count | ||
feature-supplier-package | feature-standard-package-name1 | ||
feature-cecc-qualified | feature-esd-protection | ||
feature-escc-qualified | feature-military | No | |
feature-aec-qualified | No | feature-aec-qualified-number | |
feature-auto-motive | No | feature-p-pap | No |
feature-eccn-code | EAR99 | feature-svhc | |
feature-svhc-exceeds-threshold | No |
配送
配送タイプ | 配送料 | リードタイム | |
---|---|---|---|
DHL | $20.00-$40.00 (0.50 KG) | 2-5 日々 | |
フェデックス | $20.00-$40.00 (0.50 KG) | 2-5 日々 | |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 日々 | |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 日々 | |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 日々 | |
登録された航空便 | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
処理時間:送料は地域や国によって異なります。
支払い
支払条件 | ハンドフィー | |
---|---|---|
電信送金 | 銀行手数料 US$30.00 を請求します。 | |
ペイパル | 4.0%のサービス料がかかります。 | |
クレジットカード | 3.5%のサービス料がかかります。 | |
ウエスタンユニオン | charge US.00 banking fee. | |
送金サービス | 銀行手数料は 0.00 米ドルかかります。 |
保証
1.購入した電子部品には365日保証が含まれており、製品の品質を保証します。
2.受け取った商品の一部が完璧な品質ではない場合、当社は責任を持って返金または交換を手配します。 ただし、商品は元の状態のままでなければなりません。
パッキング
-
ステップ1 :製品
-
ステップ2 :真空包装
-
ステップ3 :静電気防止袋
-
ステップ4 :個包装
-
ステップ5 :梱包箱
-
ステップ6 :バーコード配送タグ
すべての製品は静電気防止袋に梱包されます。 ESD 帯電防止保護を備えた状態で出荷されます。
社外の ESD 梱包ラベルには、部品番号、ブランド、数量などの当社の情報が使用されます。
私たちは出荷前にすべての商品を検査し、すべての製品が良好な状態であることを確認し、部品が新しいオリジナルでデータシートと一致していることを確認します。
すべての商品に問題がないことを確認した後、梱包後、安全に梱包し、グローバルエクスプレスで発送します。 優れた耐穿刺性と耐引裂性を示し、シールの完全性も良好です。
データシート PDF
私たちは高品質の製品、思いやりのあるサービス、販売後の保証を提供します
-
豊富な商品を取り揃えておりますので、お客様の様々なニーズにお応え致します。
-
最小注文数量は1個からとなります。
-
最低国際配送料は0.00ドルから
-
全商品365日品質保証
Unmatched quality, rapid delivery.