このウェブサイトは Cookie を使用しています。このサイトを使用すると、Cookie の使用に同意したことになります。詳細については、こちらをご覧くださいプライバシーポリシー.

画像は参考用です。製品仕様を参照してください。

Microchip MCP2515-E/ST

Name: MCP2515-E/ST
Rating: 4.5 (6 reviews)

1Mbps Data Rate

ブランド: Microchip Technology, Inc

製造元部品 #: MCP2515-E/ST

データシート: MCP2515-E/ST Datasheet (PDF)

パッケージ/ケース: TSSOP-20

RoHS ステータス:

在庫状況: 2980 個、新しいオリジナル

製品の種類: インターフェイスIC

Warranty: 1 Year Ovaga Warranty - Find Out More

価格設定

*すべての価格は米ドルです

数量	単価	外部価格
1	$1.925	$1.925
10	$1.684	$16.840
30	$1.534	$46.020
100	$1.341	$134.100
500	$1.271	$635.500
1000	$1.241	$1241.000

In Stock:2980 PCS

- +

簡単な見積もり

RFQを提出してください MCP2515-E/ST またはメールでご連絡ください: Eメール: [email protected], 12時間以内にご連絡させていただきます。

量^*

Eメール^*

連絡先^*

会社

述べる

MCP2515-E/ST 概要

The MCP2515-E/ST is a standalone CAN controller with SPI interface, designed for use in automotive and industrial applications. It features an integrated CAN controller and CAN transceiver, allowing for easy interfacing with CAN networks.This device supports both standard (11-bit) and extended (29-bit) data and remote frames. It also includes 2 receive buffers with prioritized message storage, as well as 3 transmit buffers with prioritized transmission scheduling.The MCP2515-E/ST operates on a wide voltage range of 2.7V to 5.5V and has a standby current of only 5μA, making it suitable for low-power applications. It is also capable of baud rates up to 1 Mbps.Additionally, the MCP2515-E/ST has various error detection and fault handling features, such as cyclic redundancy check (CRC) support and error flags for error detection and reporting. It is available in a compact 20-pin SOIC package for easy integration into designs

特徴

MCP2515-E/ST is a stand-alone controller area network (CAN) controller with integrated SPI interface

It supports CAN 2.0b active with baud rates up to 1 Mbps

The device has a message acceptance filter for 29-bit identifiers

It includes two receive buffers with prioritized message storage

応用

The MCP2515-E/ST is commonly used in automotive applications for connecting to the Controller Area Network (CAN) bus to transmit and receive data

It is also used in industrial automation, home automation, and other networking applications that require CAN communication

仕様

パラメータ	価値	パラメータ	価値
Bitrate Max [MBits/s]	1	CAN Controllers	1
Internal CAN Clock	No	LPM Current Max [uA]	0
Message RAM [KB]	0	Operating Voltage Min. [V]	2.7
Operating Voltage Max. [V]	5.5	Rx Buffers	2
SPI Interface	Yes	Serial Bus Speed [MHz]	10
Standby Current Max [uA]	0	Operating Temperature Min. [°C]	-40
Operating Temperature Max. [°C]	125	Time Stamp (Bits)	0
TX Buffers	3	TX Event FIFO	0
TX Queue	0

配送

	配送料	リードタイム
DHL	$20.00-$40.00 (0.50 KG)	2-5 日々
フェデックス	$20.00-$40.00 (0.50 KG)	2-5 日々
UPS	$20.00-$40.00 (0.50 KG)	2-5 日々
TNT	$20.00-$40.00 (0.50 KG)	2-5 日々
EMS	$20.00-$40.00 (0.50 KG)	2-5 日々
登録された航空便	$20.00-$40.00 (0.50 KG)	2-5 日々

処理時間：送料は地域や国によって異なります。

支払い

支払条件		ハンドフィー
	電信送金	銀行手数料 US$30.00 を請求します。
	ペイパル	4.0％のサービス料がかかります。
	クレジットカード	3.5％のサービス料がかかります。
	ウエスタンユニオン	charge US.00 banking fee.
	送金サービス	銀行手数料は 0.00 米ドルかかります。

保証

1.購入した電子部品には365日保証が含まれており、製品の品質を保証します。

2.受け取った商品の一部が完璧な品質ではない場合、当社は責任を持って返金または交換を手配します。ただし、商品は元の状態のままでなければなりません。

パッキング

ステップ1 :製品
ステップ2 :真空包装
ステップ3 :静電気防止袋
ステップ4 :個包装
ステップ5 :梱包箱
ステップ6 :バーコード配送タグ

すべての製品は静電気防止袋に梱包されます。 ESD 帯電防止保護を備えた状態で出荷されます。

社外の ESD 梱包ラベルには、部品番号、ブランド、数量などの当社の情報が使用されます。

私たちは出荷前にすべての商品を検査し、すべての製品が良好な状態であることを確認し、部品が新しいオリジナルでデータシートと一致していることを確認します。

すべての商品に問題がないことを確認した後、梱包後、安全に梱包し、グローバルエクスプレスで発送します。優れた耐穿刺性と耐引裂性を示し、シールの完全性も良好です。

パーツポイント

The MCP2515-E/ST chip is a stand-alone CAN controller with a SPI interface that simplifies CAN network integration. It provides support for CAN V2.0B protocol specifications, offering features like baud rate configurations, mask and filter modes, error detection, and message transmission/reception. With its compact size and powerful capabilities, the MCP2515-E/ST chip is widely used in automotive and industrial applications for efficient communication and control within CAN networks.
Equivalent

Some equivalent products of the MCP2515-E/ST chip include the MCP2515-I/ST, MCP2515-E/SL, and MCP2515-I/SL. These are variations of the MCP2515 chip that offer similar features and functionality.
Features

The MCP2515-E/ST is a standalone CAN controller that supports both CAN 2.0B and 1.2 protocols. It has an SPI interface, 16MHz clock speed, and operates at a wide temperature range. The device can be used in various automotive and industrial applications, providing efficient message filtering, transmit/receive buffers, and error detection capabilities.
Pinout

The MCP2515-E/ST is an 18-pin integrated circuit that serves as a CAN (Controller Area Network) controller. It supports CAN V2.0B and CAN FD protocols. The pin count and function of the MCP2515-E/ST include power supply, crystal oscillator, CAN bus interface, digital I/O, and SPI (Serial Peripheral Interface) communication.
Manufacturer

The MCP2515-E/ST is manufactured by Microchip Technology Inc. It is an American company that designs and produces microcontrollers, semiconductors, and various other electronic components for a wide range of applications.
Application Field

The MCP2515-E/ST is commonly used in applications involving CAN communication, such as automotive systems, industrial automation, and medical devices. It is used to interface microcontrollers or other devices with a CAN bus, allowing for communication and control between different components in a system.
Package

The MCP2515-E/ST chip is available in a SOIC (Small Outline Integrated Circuit) package type. The form is surface mount, and the size is 8.75 mm x 4.4 mm.