このウェブサイトは Cookie を使用しています。このサイトを使用すると、Cookie の使用に同意したことになります。詳細については、こちらをご覧くださいプライバシーポリシー.

画像は参考用です。製品仕様を参照してください。

注文金額が

$5000

得る $50 割引!

Microchip MCP2561FD-E/MF

Name: MCP2561FD-E/MF
Rating: 4.5 (6 reviews)

1/1 Transceiver CANbus 8-DFN (3x3)

ブランド: Microchip Technology, Inc

製造元部品 #: MCP2561FD-E/MF

データシート: MCP2561FD-E/MF Datasheet (PDF)

パッケージ/ケース: DFN-8

製品の種類: Drivers, Receivers, Transceivers

RoHS ステータス:

在庫状況: 3,562 個、新しいオリジナル

Warranty: 1 Year Ovaga Warranty - Find Out More

簡単な見積もり

RFQを提出してください MCP2561FD-E/MF またはメールでご連絡ください: メール: [email protected], 12時間以内にご連絡させていただきます。

数量^*

メール^*

連絡先名^*

会社

述べる

MCP2561FD-E/MF 概要

Experience unparalleled connectivity with the MCP2561FD-E/MF from Microchip Technology Inc. As the second generation of high-speed CAN transceivers, this device builds upon the proven features of its predecessor while introducing new capabilities to support the latest advancements in CAN FD technology. By ensuring Loop Delay Symmetry, the MCP2561FD-E/MF enables smooth and efficient data transmission, making it an essential component for automotive applications requiring high bit rates exceeding 5 Mbps. Its improved maximum propagation delay allows for longer bus lengths, offering greater flexibility and scalability in network design. Furthermore, the MCP2561FD-E/MF meets stringent automotive standards for low quiescent current, electromagnetic compatibility (EMC), and electrostatic discharge (ESD) protection, ensuring reliable performance in the most demanding environments. Whether you opt for the MCP2561FD with SPLIT pin or the MCP2562FD with VIO pin, you can trust in the exceptional quality and performance of these advanced CAN transceivers for your connectivity needs

特徴

Maximum Propagation Delay: 120 ns
Loop Delay Symmetry: -10%/+10% (2 Mbps)
Implements ISO-11898-2 and ISO-11898-5 Standard Physical Layer Requirements
AEC-Q100 Grade 0
Very Low Standby Current (5 μA, typical)
VIO Supply Pin to Interface Directly to CAN Controllers and Microcontrollers with 1.8V to 5.5V I/O
SPLIT Output Pin to Stabilize Common Mode in Biased Split Termination Schemes
An Unpowered Node or Brown-Out Event will Not Load the CAN Bus
Permanent Dominant Detection on TXD
Permanent Dominant Detection on Bus
Power-on Reset and Voltage Brown-Out Protection on VDD Pin
Protection Against Damage Due to Short-Circuit Conditions (Positive or Negative Battery Voltage)
Protection Against High-Voltage Transients in Automotive Environments
Automatic Thermal Shutdown Protection
Suitable for 12V and 24V Systems
Radiated emissions @ 2 Mbps with Common Mode Choke (CMC)
DPI @ 2 Mbps with CMC
High ESD Protection on CANH and CANL, meeting IEC61000-4-2 up to ±14 kV
Available in PDIP-8L, SOIC-8L and 3x3 DFN-8L
Extended (E): -40°C to +125°C
High (H): -40°C to +150°C

仕様

パラメータ	価値	パラメータ	価値
Manufacturer:	Microchip	Product Category:	CAN Interface IC
RoHS:	Y	Mounting Style:	SMD/SMT
Package / Case:	DFN-8	Type:	CAN Controller
Data Rate:	8 Mb/s	Supply Voltage - Max:	5.5 V
Supply Voltage - Min:	4.5 V	Operating Supply Current:	70 mA
Minimum Operating Temperature:	- 40 C	Maximum Operating Temperature:	+ 125 C
Packaging:	Tube	Product:	CAN Transceivers
Brand:	Microchip Technology	Operating Supply Voltage:	4.5 V to 5.5 V
Product Type:	CAN Interface IC	Factory Pack Quantity:	120
Subcategory:	Interface ICs	Unit Weight:	0.001319 oz
Tags	MCP2561FD-E, MCP2561F, MCP2561, MCP256, MCP25, MCP2, MCP	Number of Drivers:	1 Driver
Number of Receivers:	1 Receiver

配送

	配送料	リードタイム
DHL	$20.00-$40.00 (0.50 KG)	2-5 日々
フェデックス	$20.00-$40.00 (0.50 KG)	2-5 日々
UPS	$20.00-$40.00 (0.50 KG)	2-5 日々
TNT	$20.00-$40.00 (0.50 KG)	2-5 日々
EMS	$20.00-$40.00 (0.50 KG)	2-5 日々
登録された航空便	$20.00-$40.00 (0.50 KG)	2-5 日々

処理時間：送料は地域や国によって異なります。

支払い

支払条件		ハンドフィー
	電信送金	銀行手数料 US$30.00 を請求します。
	ペイパル	4.0％のサービス料がかかります。
	クレジットカード	3.5％のサービス料がかかります。
	ウエスタンユニオン	charge US.00 banking fee.
	送金サービス	銀行手数料は 0.00 米ドルかかります。

保証

1.購入した電子部品には365日保証が含まれており、製品の品質を保証します。

2.受け取った商品の一部が完璧な品質ではない場合、当社は責任を持って返金または交換を手配します。ただし、商品は元の状態のままでなければなりません。

パッキング

ステップ1 :製品
ステップ2 :真空包装
ステップ3 :静電気防止袋
ステップ4 :個包装
ステップ5 :梱包箱
ステップ6 :バーコード配送タグ

すべての製品は静電気防止袋に梱包されます。 ESD 帯電防止保護を備えた状態で出荷されます。

社外の ESD 梱包ラベルには、部品番号、ブランド、数量などの当社の情報が使用されます。

私たちは出荷前にすべての商品を検査し、すべての製品が良好な状態であることを確認し、部品が新しいオリジナルでデータシートと一致していることを確認します。

すべての商品に問題がないことを確認した後、梱包後、安全に梱包し、グローバルエクスプレスで発送します。優れた耐穿刺性と耐引裂性を示し、シールの完全性も良好です。

パーツポイント

The MCP2561FD-E/MF is a high-speed CAN transceiver chip designed for automotive and industrial applications. It supports the Controller Area Network (CAN) protocol and provides reliable communication between microcontrollers and other CAN devices. The chip offers improved bus reliability, higher data rates, and low power consumption.
Equivalent

Some equivalent products to MCP2561FD-E/MF chip include SN65HVD253DR, TJA1051T/3, and MAX3051ESA+. These are all CAN transceiver chips that provide similar functionality to the MCP2561FD-E/MF.
Features

The MCP2561FD-E/MF is a CAN transceiver featuring high-speed communication with data rates up to 8 Mbps. It has an extended temperature range (from -40°C to 150°C), low-power operation, and is compliant with CAN 2.0B and ISO 11898-2 standards. The device also provides fault-detection and bus-fault-protection features for robust performance in automotive and industrial applications.
Pinout

The MCP2561FD-E/MF is a CAN transceiver chip with a DFN-8 package. It has 8 pins. The pin functions include Vdd (power supply), Vss (ground), Vio (transceiver input/output level), RS (receiver/transmitter standby mode), TXD (CAN data output), RXD (CAN data input), STBY (transceiver standby control), and S (slew rate control selection).
Manufacturer

The manufacturer of the MCP2561FD-E/MF is Microchip Technology Inc. It is a leading provider of microcontroller, mixed-signal, analog, and Flash-IP solutions. The company specializes in designing and manufacturing a diverse range of integrated circuits, which are used in various industries such as automotive, consumer electronics, and industrial automation.
Application Field

The MCP2561FD-E/MF is primarily used in automotive communication systems as a high-speed CAN transceiver. It features robustness and improved EMC performance, making it suitable for vehicle networking applications such as body control modules, infotainment systems, powertrain systems, and engine control units.
Package

The MCP2561FD-E/MF chip has a SOIC package type, a dual-form layout, and a small size, typically measuring 8.65mm x 3.91mm.