TI CC2340R52E0RKPR
IC RF TxRx + MCU Bluetooth Bluetooth v5.3, Wireless M-Bus, Zigbee® 2.36GHz ~ 2.5GHz 40-VFQFN Exposed Pad
ブランド: Texas Instruments
製造元部品 #: CC2340R52E0RKPR
データシート: CC2340R52E0RKPR データシート (PDF)
パッケージ/ケース:
製品の種類: RF System on a Chip - SoC
CC2340R52E0RKPR 概要
The SimpleLink™ CC2340R5 device is a 2.4 GHz wireless microcontroller (MCU) targeting Bluetooth® 5.3 Low Energy and Proprietary 2.4 GHz applications. The device is optimized for low-power wireless communication with on-chip dual image Over the Air Download (OAD) support (1) in Building automation (wireless sensors, lighting control, beacons), asset tracking, medical, retail EPOS (electronic point of sale), ESL (electronic shelf label), and Personal electronics (toys, HID, stylus pens) markets. highlighted features of this device include:
- Support for Bluetooth ® 5 features: High Speed Mode (2 Mbps PHY), Long Range (LE Coded 125 kbps and 500 kbps PHYs), Privacy 1.2.1 and Channel Selection Algorithm #2, as well as backwards compatibility and support for key features from the Bluetooth ® 4.2 and earlier Low Energy specifications.
- Fully-qualified Bluetooth ® 5.3 software protocol stack included with the SimpleLink™ CC23xx Software Development Kit (SDK).
- Zigbee® protocol stack support in the SimpleLink™ CC23xx Software Development Kit (SDK) 2
- Ultra-low standby current less than 0.71 µA with RTC operational and full RAM retention that enables significant battery life extension especially for applications with longer sleep intervals.
- Integrated balun for reduced Bill-of-Material (BOM) board layout
- Excellent radio sensitivity and robustness (selectivity and blocking) performance for Bluetooth ® Low Energy (-102 dBm for 125 kbps LE Coded PHY, with integrated balun).
The CC2340R5 device is part of the SimpleLink™ MCU platform, which consists of Wi-Fi, Bluetooth Low Energy, Thread, Zigbee, Sub-1 GHz MCUs, and host MCUs that all share a common, easy-to-use development environment with a single core software development kit (SDK) and rich tool set. A one-time integration of the SimpleLink™ platform enables you to add any combination of the portfolio’s devices into your design, allowing 100 percent code reuse when your design requirements change. For more information, visit SimpleLink™ MCU platform.
(1)Available in a future SDK
特徴
Wireless microcontroller
- Optimized 48-MHz Arm Cortex-M0+ processor
- 512 KB of in-system programmable flash
- 12 KB of ROM for bootloader and drivers
- 36 KB of ultra-low leakage SRAM. Full RAM retention in standby mode
- 2.4 GHz RF transceiver compatible with Bluetooth 5.3 Low Energy
- Integrated balun
- Supports over-the-air upgrade (OTA)
- Serial Wire Debug (SWD)
Low power consumption
- MCU consumption:
- 2.6 mA active mode, CoreMark
- 53 µA/MHz running CoreMark
- < 710 nA standby mode, RTC, 36 KB RAM
- 150 nA shutdown mode, wake-up on pin
- Radio Consumption:
- 5.3 mA RX
- 5.1 mA TX at 0 dBm
- < 11.0 mA TX at +8 dBm
Wireless protocol support
- Bluetooth® 5.3 Low Energy
- Zigbee® (1)
- SimpleLink™ TI 15.4-stack 1
- Proprietary systems
High-performance radio
- -102 dBm for Bluetooth® Low Energy 125 kbps
- -96.5 dBm for Bluetooth® Low Energy 1 Mbps
- Output power up to +8 dBm with temperature compensation
Regulatory compliance
- Suitable for systems targeting compliance with these standards:
- EN 300 328 (Europe)
- FCC CFR47 Part 15
- ARIB STD-T66 (Japan)
MCU peripherals
- Up to 26 I/O Pads
- 2 IO pads SWD, muxed with GPIOs
- 2 IO pads LFXT, muxed with GPIOs
- Up to 22 DIOs (analog or digital IOs)
- 3× 16-bit and 1× 24-bit general-purpose timers, quadrature decode mode support
- 12-bit ADC, 1.2 Msps with external reference, 267 ksps with internal reference, up to 12 external ADC inputs
- 1× low power comparator
- 1× UART
- 1× SPI
- 1× I 2C
- Real-time clock (RTC)
- Integrated temperature and battery monitor
- Watchdog timer
Security enablers
- AES 128-bit cryptographic accelerator
- Random number generator from on-chip analog noise
Development tools and software
- LP-EM-CC2340R5 LaunchPad Development Kit
- SimpleLink™ CC23xx Software Development Kit (SDK)
- SmartRF™ Studio for simple radio configuration
- SysConfig system configuration tool
Operating range
- On-chip buck DC/DC converter
- 1.71-V to 3.8-V single supply voltage
- T j: -40 to +125°C
RoHS-compliant package
- 5-mm × 5-mm RKP QFN40 (26 GPIOs)
- 4-mm × 4-mm RGE QFN24 (12 GPIOs)
(1)Available in a future SDK
仕様
パラメータ | 価値 | パラメータ | 価値 |
---|---|---|---|
Manufacturer | Texas Instruments | Product Category | RF System on a Chip - SoC |
RoHS | Details | Type | BLE 5.3 |
Core | ARM Cortex M0+ | Operating Frequency | 2.4 GHz |
Output Power | 8 dBm | Supply Voltage - Min | 1.71 V |
Supply Voltage - Max | 3.8 V | Program Memory Size | 512 kB |
Minimum Operating Temperature | - 40 C | Maximum Operating Temperature | + 125 C |
Package / Case | VQFN-40 | ADC Resolution | 12 bit |
Brand | Texas Instruments | Data RAM Size | 36 kB |
Data RAM Type | SRAM | Height | 1 mm |
Interface Type | I2C, SPI, UART | Length | 5 mm |
Maximum Clock Frequency | 48 MHz | Moisture Sensitive | Yes |
Mounting Style | SMD/SMT | Number of I/Os | 26 I/O |
Number of Timers | 3 x 16 bit, 1 x 24 bit | Operating Supply Voltage | 1.71 V to 3.8 V |
Operating Temperature Range | - 40 C to + 125 C | Product Type | RF System on a Chip - SoC |
Program Memory Type | Flash | Series | CC2340R5 |
Factory Pack Quantity | 3000 | Subcategory | Wireless & RF Integrated Circuits |
Technology | Si | Tradename | SimpleLink |
Width | 5 mm |
配送
配送タイプ | 配送料 | リードタイム | |
---|---|---|---|
DHL | $20.00-$40.00 (0.50 KG) | 2-5 日々 | |
フェデックス | $20.00-$40.00 (0.50 KG) | 2-5 日々 | |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 日々 | |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 日々 | |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 日々 | |
登録された航空便 | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
処理時間:送料は地域や国によって異なります。
支払い
支払条件 | ハンドフィー | |
---|---|---|
電信送金 | 銀行手数料 US$30.00 を請求します。 | |
ペイパル | 4.0%のサービス料がかかります。 | |
クレジットカード | 3.5%のサービス料がかかります。 | |
ウエスタンユニオン | charge US.00 banking fee. | |
送金サービス | 銀行手数料は 0.00 米ドルかかります。 |
保証
1.購入した電子部品には365日保証が含まれており、製品の品質を保証します。
2.受け取った商品の一部が完璧な品質ではない場合、当社は責任を持って返金または交換を手配します。 ただし、商品は元の状態のままでなければなりません。
パッキング
-
ステップ1 :製品
-
ステップ2 :真空包装
-
ステップ3 :静電気防止袋
-
ステップ4 :個包装
-
ステップ5 :梱包箱
-
ステップ6 :バーコード配送タグ
すべての製品は静電気防止袋に梱包されます。 ESD 帯電防止保護を備えた状態で出荷されます。
社外の ESD 梱包ラベルには、部品番号、ブランド、数量などの当社の情報が使用されます。
私たちは出荷前にすべての商品を検査し、すべての製品が良好な状態であることを確認し、部品が新しいオリジナルでデータシートと一致していることを確認します。
すべての商品に問題がないことを確認した後、梱包後、安全に梱包し、グローバルエクスプレスで発送します。 優れた耐穿刺性と耐引裂性を示し、シールの完全性も良好です。
私たちは高品質の製品、思いやりのあるサービス、販売後の保証を提供します
-
豊富な商品を取り揃えておりますので、お客様の様々なニーズにお応え致します。
-
最小注文数量は1個からとなります。
-
最低国際配送料は0.00ドルから
-
全商品365日品質保証