このウェブサイトは Cookie を使用しています。このサイトを使用すると、Cookie の使用に同意したことになります。詳細については、こちらをご覧くださいプライバシーポリシー.

画像は参考用です。製品仕様を参照してください。

注文金額が

$5000

得る $50 割引!

Microchip MCP2561FDT-E/SN

Name: MCP2561FDT-E/SN
Rating: 4.5 (6 reviews)

1/1 Transceiver CANbus 8-SOIC

ブランド: Microchip Technology, Inc

製造元部品 #: MCP2561FDT-E/SN

データシート: MCP2561FDT-E/SN Datasheet (PDF)

パッケージ/ケース: SOIC-8

製品の種類: Drivers, Receivers, Transceivers

RoHS ステータス:

在庫状況: 3,259 個、新しいオリジナル

Warranty: 1 Year Ovaga Warranty - Find Out More

簡単な見積もり

RFQを提出してください MCP2561FDT-E/SN またはメールでご連絡ください: メール: [email protected], 12時間以内にご連絡させていただきます。

数量^*

メール^*

連絡先名^*

会社

述べる

MCP2561FDT-E/SN 概要

The MCP2561FDT-E/SN from Microchip Technology Inc. represents the next evolution in high-speed CAN transceivers. With its advanced features and improved performance, this second-generation device is well-equipped to handle the demanding requirements of modern automotive systems. Offering enhanced Loop Delay Symmetry and an extended maximum propagation delay, the MCP2561FDT-E/SN ensures seamless communication at higher data rates. Plus, its compliance with automotive standards for CAN FD bit rates, low quiescent current, EMC, and ESD protection make it a top choice for automotive designers seeking a dependable and efficient transceiver solution

特徴

Maximum Propagation Delay: 120 ns
Loop Delay Symmetry: -10%/+10% (2 Mbps)
Implements ISO-11898-2 and ISO-11898-5 Standard Physical Layer Requirements
AEC-Q100 Grade 0
Very Low Standby Current (5 μA, typical)
VIO Supply Pin to Interface Directly to CAN Controllers and Microcontrollers with 1.8V to 5.5V I/O
SPLIT Output Pin to Stabilize Common Mode in Biased Split Termination Schemes
An Unpowered Node or Brown-Out Event will Not Load the CAN Bus
Permanent Dominant Detection on TXD
Permanent Dominant Detection on Bus
Power-on Reset and Voltage Brown-Out Protection on VDD Pin
Protection Against Damage Due to Short-Circuit Conditions (Positive or Negative Battery Voltage)
Protection Against High-Voltage Transients in Automotive Environments
Automatic Thermal Shutdown Protection
Suitable for 12V and 24V Systems
Radiated emissions @ 2 Mbps with Common Mode Choke (CMC)
DPI @ 2 Mbps with CMC
High ESD Protection on CANH and CANL, meeting IEC61000-4-2 up to ±14 kV
Available in PDIP-8L, SOIC-8L and 3x3 DFN-8L
Extended (E): -40°C to +125°C
High (H): -40°C to +150°C

仕様

パラメータ	価値	パラメータ	価値
Manufacturer	Microchip Technology	Product Category	Interface - Drivers, Receivers, Transceivers
Series	-	Product	CAN Transceivers
Type	Transceiver	Packaging	Tape & Reel (TR) Alternate Packaging
Unit-Weight	0.019048 oz	Package-Case	SOIC-8
Operating-Temperature	-40°C ~ 125°C	Mounting-Type	Surface Mount
Voltage-Supply	4.5 V ~ 5.5 V	Supplier-Device-Package	8-SOIC
Protocol	CAN	Data-Rate	8Mbps
Number-of-Drivers-Receivers	2016/1/1	Duplex	-
Receiver-Hysteresis	200mV	Operating-Supply-Voltage	4.5 V to 5.5 V
Operating-Supply-Current	70 mA	Supply-Voltage-Max	5.5 V
Supply-Voltage-Min	4.5 V

配送

	配送料	リードタイム
DHL	$20.00-$40.00 (0.50 KG)	2-5 日々
フェデックス	$20.00-$40.00 (0.50 KG)	2-5 日々
UPS	$20.00-$40.00 (0.50 KG)	2-5 日々
TNT	$20.00-$40.00 (0.50 KG)	2-5 日々
EMS	$20.00-$40.00 (0.50 KG)	2-5 日々
登録された航空便	$20.00-$40.00 (0.50 KG)	2-5 日々

処理時間：送料は地域や国によって異なります。

支払い

支払条件		ハンドフィー
	電信送金	銀行手数料 US$30.00 を請求します。
	ペイパル	4.0％のサービス料がかかります。
	クレジットカード	3.5％のサービス料がかかります。
	ウエスタンユニオン	charge US.00 banking fee.
	送金サービス	銀行手数料は 0.00 米ドルかかります。

保証

1.購入した電子部品には365日保証が含まれており、製品の品質を保証します。

2.受け取った商品の一部が完璧な品質ではない場合、当社は責任を持って返金または交換を手配します。ただし、商品は元の状態のままでなければなりません。

パッキング

ステップ1 :製品
ステップ2 :真空包装
ステップ3 :静電気防止袋
ステップ4 :個包装
ステップ5 :梱包箱
ステップ6 :バーコード配送タグ

すべての製品は静電気防止袋に梱包されます。 ESD 帯電防止保護を備えた状態で出荷されます。

社外の ESD 梱包ラベルには、部品番号、ブランド、数量などの当社の情報が使用されます。

私たちは出荷前にすべての商品を検査し、すべての製品が良好な状態であることを確認し、部品が新しいオリジナルでデータシートと一致していることを確認します。

すべての商品に問題がないことを確認した後、梱包後、安全に梱包し、グローバルエクスプレスで発送します。優れた耐穿刺性と耐引裂性を示し、シールの完全性も良好です。

パーツポイント

The MCP2561FDT-E/SN is a CAN (Controller Area Network) transceiver chip manufactured by Microchip Technology. It is designed to facilitate communication between microcontrollers and CAN networks. With robust features and reliability, the MCP2561FDT-E/SN offers improved system performance, making it suitable for applications in automotive and industrial environments.
Equivalent

There are no direct equivalent products of the MCP2561FDT-E/SN. However, alternatives you can consider are the MCP2562FD-E/SN and MCP2561-E/SN chips, which are both high-speed CAN transceivers. These alternatives have similar features and can be used as substitutes in certain applications.
Features

The MCP2561FDT-E/SN is an integrated CAN transceiver with a split termination feature. It operates at improved data rates (up to 1 megabit per second) and provides high electromagnetic compatibility. The device has a wide input voltage range and is compatible with both 5V and 3.3V systems. It is suitable for automotive and industrial applications.
Pinout

The MCP2561FDT-E/SN is an 8-pin IC specially designed to provide a physical interface between an MCU and a CAN network. It acts as a CAN transceiver and supports the CAN 2.0B protocol. The pin count is 8, and its function is to enable reliable data communication and bus buffering between the MCU and the CAN network.
Manufacturer

The manufacturer of the MCP2561FDT-E/SN is Microchip Technology Inc. Microchip is a leading American semiconductor company that designs, manufactures, and sells a wide range of integrated circuits and semiconductor products. They specialize in microcontroller and analog semiconductors, providing solutions for various industries including automotive, consumer electronics, industrial, and more.
Application Field

The MCP2561FDT-E/SN is a high-speed CAN transceiver that is commonly used in automotive and industrial applications. It is specifically designed to provide reliable communication and robustness in harsh environments. Some application areas include automotive control systems, industrial automation, telematics, and communication networks.
Package

The MCP2561FDT-E/SN chip is available in an SMD package type, with a surface-mount format. It has a small package size, specifically SOIC-8.