画像は参考用です。製品仕様を参照してください。
注文金額が
$5000Microchip MCP2544FD-E/SN
1/1 Transceiver CANbus 8-SOIC
ブランド: Microchip Technology, Inc
製造元部品 #: MCP2544FD-E/SN
データシート: MCP2544FD-E/SN Datasheet (PDF)
パッケージ/ケース: SOIC-8
MCP2544FD-E/SN 概要
The MCP2544FD-E/SN is a top-of-the-line CAN transceiver specifically engineered for high-speed CAN FD applications, boasting an impressive 8Mbps communication speed capacity. One notable improvement is the extended maximum propagation delay which facilitates longer bus length support, making it a versatile choice for various automotive applications. This device is tailored to meet the stringent requirements of the automotive industry, ensuring reliable performance for CAN FD bit rates exceeding 2 Mbps, while also offering low quiescent current for energy efficiency. Additionally, the MCP2544FD-E/SN excels in electromagnetic compatibility (EMC) and electrostatic discharge (ESD) protection, guaranteeing robustness in diverse operating conditions
特徴
- Supports both Classic CAN or CAN Flexible Data Rate applications
- Optimized for CAN FD (Flexible Data rate) at 2, 5 and 8 Mbps Operation
- Meets the latest ISO/DIS 11898-2:2015 specification
- Supports Wake-up pattern
- AEC-Q100 Grade 0
- Very Low Standby Current (5 µA, typical)
- VIO Supply Pin to Interface Directly to CAN Controllers and Microcontrollers with 1.7V to 5.5V I/O
- An Unpowered Node or Brown-Out Event will Not Load the CAN Bus
- Permanent Dominant Detection on TXD
- Permanent Dominant Detection on Bus
- Power-on Reset and Voltage Brown-Out Protection on VDD Pin
- Protection Against Damage Due to Short-Circuit Conditions (Positive or Negative Battery Voltage)
- Protection Against High-Voltage Transients in Automotive Environments
- Automatic Thermal Shutdown Protection
- Suitable for 12V and 24V Systems
- Extremely robust meeting automotive EMC hardware requirements
- Smallest package option in the industry 2x3 DFN-8L
- Also available in SOIC-8L and 3x3 DFN-8L
- Extended (E): -40°C to +125°C
- High (H): -40°C to +150°C
仕様
| パラメータ | 価値 | パラメータ | 価値 |
|---|---|---|---|
| Manufacturer: | Microchip | Product Category: | CAN Interface IC |
| RoHS: | Y | Package / Case: | SOIC-8 |
| Series: | MCP2544 | Packaging: | Tube |
| Brand: | Microchip Technology | Product Type: | CAN Interface IC |
| Factory Pack Quantity: | 100 | Subcategory: | Interface ICs |
| Tags | MCP2544F, MCP2544, MCP254, MCP25, MCP2, MCP | Package | Tube |
| Product Status | Active | Type | Transceiver |
| Protocol | CANbus | Number of Drivers/Receivers | 1/1 |
| Receiver Hysteresis | 200 mV | Data Rate | 8Mbps |
| Voltage - Supply | 4.5V ~ 5.5V | Operating Temperature | -40°C ~ 125°C |
| Mounting Type | Surface Mount | Package / Case | 8-SOIC (0.154", 3.90mm Width) |
| Supplier Device Package | 8-SOIC |
配送
| 配送タイプ | 配送料 | リードタイム | |
|---|---|---|---|
 |
DHL | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
 |
フェデックス | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
 |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
 |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
 |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
 |
登録された航空便 | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
処理時間：送料は地域や国によって異なります。
支払い
| 支払条件 | ハンドフィー | |
|---|---|---|
 |
電信送金 | 銀行手数料 US$30.00 を請求します。 |
 |
ペイパル | 4.0％のサービス料がかかります。 |
 |
クレジットカード | 3.5％のサービス料がかかります。 |
 |
ウエスタンユニオン | charge US.00 banking fee. |
 |
送金サービス | 銀行手数料は 0.00 米ドルかかります。 |
保証
1.購入した電子部品には365日保証が含まれており、製品の品質を保証します。
2.受け取った商品の一部が完璧な品質ではない場合、当社は責任を持って返金または交換を手配します。 ただし、商品は元の状態のままでなければなりません。
パッキング
-
![製品]( "製品")
ステップ1 :製品
-
![真空包装]( "真空包装")
ステップ2 :真空包装
-
![静電気防止袋]( "静電気防止袋")
ステップ3 :静電気防止袋
-
![個包装]( "個包装")
ステップ4 :個包装
-
![梱包箱]( "梱包箱")
ステップ5 :梱包箱
-
![バーコード配送タグ]( "バーコード配送タグ")
ステップ6 :バーコード配送タグ
すべての製品は静電気防止袋に梱包されます。 ESD 帯電防止保護を備えた状態で出荷されます。
社外の ESD 梱包ラベルには、部品番号、ブランド、数量などの当社の情報が使用されます。
私たちは出荷前にすべての商品を検査し、すべての製品が良好な状態であることを確認し、部品が新しいオリジナルでデータシートと一致していることを確認します。
すべての商品に問題がないことを確認した後、梱包後、安全に梱包し、グローバルエクスプレスで発送します。 優れた耐穿刺性と耐引裂性を示し、シールの完全性も良好です。
パーツポイント
-
The MCP2544FD-E/SN is a high-speed CAN FD transceiver chip used for connecting microcontrollers to CAN bus systems. It supports data rates up to 8 Mbps and offers improved noise immunity and ESD protection. The chip provides reliable communication in automotive and industrial applications, allowing for efficient exchange of data over the CAN network.
-
Equivalent
Some equivalent products to the MCP2544FD-E/SN chip include the TJA1049T/VM, the ATA6562-PLQW, and the SN65HVD254DR. These chips are all similar in function and can be used as alternatives to the MCP2544FD-E/SN. -
Features
MCP2544FD-E/SN is a high-speed CAN FD transceiver that transfers data up to 6 Mbps. It supports a wide supply voltage range and has enhanced electromagnetic compatibility features. With improved bus wake-up and extensive I/O protection, it offers a robust solution for automotive and industrial applications requiring high data rates and accuracy. -
Pinout
The MCP2544FD-E/SN has a pin count of 14. It is a CAN FD transceiver that integrates the physical layer for high-speed CAN bus communication. It provides features like bus fault protection, improved electromagnetic compatibility, and low power consumption for automotive and industrial applications. -
Manufacturer
The manufacturer of the MCP2544FD-E/SN is Microchip Technology Inc. It is a leading provider of microcontroller, mixed-signal, analog, and Flash-IP integrated circuits. -
Application Field
The MCP2544FD-E/SN is a transceiver designed for use in automotive and industrial applications. It is commonly used in high-speed Controller Area Network (CAN) networks, providing reliable and efficient communication between electronic control units (ECUs) in vehicles and industrial machinery. -
Package
The MCP2544FD-E/SN chip comes in a SOIC-8 (Small Outline Integrated Circuit) package type. It has a 150-mil body width and a 3.9 mm maximum height.
データシート PDF
私たちは高品質の製品、思いやりのあるサービス、販売後の保証を提供します
-
![製品]( "製品")
豊富な商品を取り揃えておりますので、お客様の様々なニーズにお応え致します。
-
![quantity]( "quantity")
最小注文数量は1個からとなります。
-
![shipping]( "shipping")
最低国際配送料は0.00ドルから
-
![保証]( "保証")
全商品365日品質保証
Highly impressed with the responsiveness and professionalism of Ovaga.