画像は参考用です。製品仕様を参照してください。
Microchip MCP23017-E/SO
I/O Expander 16 I2C 1.7 MHz 28-SOIC
ブランド: MICROCHIP
製造元部品 #: MCP23017-E/SO
データシート: MCP23017-E/SO データシート (PDF)
パッケージ/ケース: SOP28
製品の種類: Interface - I/O Expanders
MCP23017-E/SO 概要
The MCP23017/MCP23S17 (MCP23X17) devicefamily provides 16-bit, general purpose parallel I/Oexpansion for I2C bus or SPI applications. The twodevices differ only in the serial interface:
• MCP23017 – I2C interface
• MCP23S17 – SPI interface
The MCP23X17 consists of multiple 8-bit configurationregisters for input, output and polarity selection. Thesystem master can enable the I/Os as either inputs oroutputs by writing the I/O configuration bits (IODIRA/B).The data for each input or output is kept in thecorresponding input or output register. The polarity ofthe Input Port register can be inverted with the PolarityInversion register. All registers can be read by thesystem master.
The 16-bit I/O port functionally consists of two 8-bitports (PORTA and PORTB). The MCP23X17 can beconfigured to operate in the 8-bit or 16-bit modes viaIOCON.BANK.There are two interrupt pins, INTA and INTB, that canbe associated with their respective ports, or can belogically OR’ed together so that both pins will activate ifeither port causes an interrupt.The interrupt output can be configured to activateunder two conditions (mutually exclusive):
1. When any input state differs from itscorresponding Input Port register state. This isused to indicate to the system master that aninput state has changed.
2. When an input state differs from a preconfigured register value (DEFVAL register).
The Interrupt Capture register captures port values atthe time of the interrupt, thereby saving the conditionthat caused the interrupt.The Power-on Reset (POR) sets the registers to theirdefault values and initializes the device state machine.The hardware address pins are used to determine thedevice address.
特徴
- 16-bit input/output port expander with interrupt output
- Cascadable for up to 8 devices on one bus
- 25mA sink/source capability per I/O
- Supports 100kHz, 400kHz and 1.7MHz I2C™Compatible compatible modes
仕様
| パラメータ | 価値 | パラメータ | 価値 |
|---|---|---|---|
| Product Category | Interface - I/O Expanders | RoHS | Details |
| Series | MCP23017 | Mounting Style | SMD/SMT |
| Package / Case | SOIC-28 | Interface Type | I2C, Serial |
| Number of I/Os | 16 I/O | Interrupt Output | With Interrupt |
| Supply Voltage - Min | 1.8 V | Supply Voltage - Max | 5.5 V |
| Maximum Clock Frequency | 1.7 MHz | Minimum Operating Temperature | - 40 C |
| Maximum Operating Temperature | + 125 C | ESD Protection | 4 kV |
| Brand | Microchip Technology | Input Voltage | 1.8 V to 5.5 V |
| Logic Family | MCP23017 | Logic Type | I/O Expander |
| Moisture Sensitive | Yes | Operating Supply Voltage | 1.8 V to 5.5 V |
| Output Current | 25 mA | Output Voltage | 1.8 V to 4.5 V |
| Pd - Power Dissipation | 700 mW | Product | I/O Expanders |
| Product Type | I/O Expanders | Propagation Delay Time | 50 ns |
| Factory Pack Quantity | 27 | Subcategory | Interface ICs |
| Type | I/O Expander |
配送
| 配送タイプ | 配送料 | リードタイム | |
|---|---|---|---|
 |
DHL | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
 |
フェデックス | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
 |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
 |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
 |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
 |
登録された航空便 | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
処理時間：送料は地域や国によって異なります。
支払い
| 支払条件 | ハンドフィー | |
|---|---|---|
 |
電信送金 | 銀行手数料 US$30.00 を請求します。 |
 |
ペイパル | 4.0％のサービス料がかかります。 |
 |
クレジットカード | 3.5％のサービス料がかかります。 |
 |
ウエスタンユニオン | charge US.00 banking fee. |
 |
送金サービス | 銀行手数料は 0.00 米ドルかかります。 |
保証
1.購入した電子部品には365日保証が含まれており、製品の品質を保証します。
2.受け取った商品の一部が完璧な品質ではない場合、当社は責任を持って返金または交換を手配します。 ただし、商品は元の状態のままでなければなりません。
パッキング
-
![製品]( "製品")
ステップ1 :製品
-
![真空包装]( "真空包装")
ステップ2 :真空包装
-
![静電気防止袋]( "静電気防止袋")
ステップ3 :静電気防止袋
-
![個包装]( "個包装")
ステップ4 :個包装
-
![梱包箱]( "梱包箱")
ステップ5 :梱包箱
-
![バーコード配送タグ]( "バーコード配送タグ")
ステップ6 :バーコード配送タグ
すべての製品は静電気防止袋に梱包されます。 ESD 帯電防止保護を備えた状態で出荷されます。
社外の ESD 梱包ラベルには、部品番号、ブランド、数量などの当社の情報が使用されます。
私たちは出荷前にすべての商品を検査し、すべての製品が良好な状態であることを確認し、部品が新しいオリジナルでデータシートと一致していることを確認します。
すべての商品に問題がないことを確認した後、梱包後、安全に梱包し、グローバルエクスプレスで発送します。 優れた耐穿刺性と耐引裂性を示し、シールの完全性も良好です。
パーツポイント
-
The MCP23017-E/SO is an I/O expander chip that allows for the expansion of input and output capabilities of a microcontroller. It provides an additional 16 digital I/O pins, which can be configured as inputs or outputs. The chip communicates with the microcontroller through I2C interface, making it easy to connect multiple chips using only two wires. It is commonly used in applications where the microcontroller has limited I/O pins.
-
Equivalent
Equivalent products of the MCP23017-E/SO chip include the MCP23017-I/SO and MCP23S17-I/SO from Microchip Technology. These chips have similar specifications and functionality, including 16-bit input/output (I/O) capabilities, internal pull-up resistors, and interrupt-on-change features. -
Features
The MCP23017-E/SO is a 16-bit I/O expander with serial interface designed to provide additional I/O ports for microcontrollers. It features two 8-bit ports that can be independently configured as inputs or outputs, providing a total of 16 I/O pins. Additionally, it supports interrupt-on-change and can be cascaded with other MCP23017 devices for even more I/O capabilities. -
Pinout
The MCP23017-E/SO is a 28-pin integrated circuit (IC) with 16 I/O pins. Its function is to provide additional I/O ports for microcontrollers or other devices. It can be configured as inputs or outputs, and can be controlled through the I2C bus interface. -
Manufacturer
The MCP23017-E/SO is manufactured by Microchip Technology Inc., which is an American company specializing in the production of microcontrollers and other semiconductor products. -
Application Field
The MCP23017-E/SO is a general-purpose I/O expander that can be used in various application areas including industrial automation, home automation, robotics, and electronic projects. With its 16 programmable I/O pins, it provides additional digital inputs and outputs, enabling increased functionality and flexibility in controlling and monitoring various devices and sensors. -
Package
The MCP23017-E/SO chip is in a small outline (SO) package type with a surface mount (SMT) form. It measures 5.30mm x 2.00mm x 1.75mm.
私たちは高品質の製品、思いやりのあるサービス、販売後の保証を提供します
-
![製品]( "製品")
豊富な商品を取り揃えておりますので、お客様の様々なニーズにお応え致します。
-
![quantity]( "quantity")
最小注文数量は1個からとなります。
-
![shipping]( "shipping")
最低国際配送料は0.00ドルから
-
![保証]( "保証")
全商品365日品質保証
