このウェブサイトは Cookie を使用しています。 このサイトを使用すると、Cookie の使用に同意したことになります。 詳細については、こちらをご覧ください プライバシーポリシー.

Infineon BTS781GP 48HRS

The BTS781GP features 15 pins and a TO-263 package type

ISO14001 ISO9001 DUNS

ブランド: Infineon Technologies

製造元部品 #: BTS781GP

データシート: BTS781GP Datasheet (PDF)

パッケージ/ケース: TO-263-15

RoHS ステータス:

在庫状況: 2178 個、新しいオリジナル

製品の種類: トランジスタ

Warranty: 1 Year Ovaga Warranty - Find Out More

価格設定

*すべての価格は米ドルです

数量 単価 外部価格
1 $6.747 $6.747
200 $2.611 $522.200
500 $2.520 $1260.000
1000 $2.474 $2474.000

In Stock:2178 PCS

- +

簡単な見積もり

RFQを提出してください BTS781GP またはメールでご連絡ください: Eメール: [email protected], 12時間以内にご連絡させていただきます。

BTS781GP 概要

The BTS781GP is a Smart Highside Power Switch, produced by Infineon Technologies. It is designed for automotive applications such as power distribution, relay and motor control, and heating systems. This power switch is capable of driving resistive, inductive, and capacitive loads with high efficiency due to its integrated protection features.The BTS781GP has a nominal input voltage range from 12V to 24V, making it suitable for standard automotive supply systems. It can handle continuous output currents of up to 4A and peak output currents of up to 25A. The device features overload protection, overvoltage protection, and short-circuit protection to ensure the safety and reliability of the system it is integrated into.Additionally, the BTS781GP offers diagnostic features such as open load detection and overtemperature shutdown. It is housed in a PG-TO263-7 package and operates within a temperature range of -40°C to 150°C.

bts781gp

特徴

  • Smart Low Side Power Switch
  • Overload protection
  • Short circuit protection
  • Overvoltage protection
  • Overtemperature protection
  • Diagnostic feedback
  • Power saving mode
  • Protections against load dump and inductive loads
  • High voltage capability (42V)
  • 0. Integrated gate driver for external MOSFET
  • 応用

  • The BTS781GP is commonly used in automotive applications for controlling high current loads such as motors, heaters, and lights
  • It is also used in industrial applications for controlling actuators, pumps, and other high current devices
  • 仕様

    パラメータ 価値 パラメータ 価値
    Pbfree Code No Rohs Code No
    Part Life Cycle Code Active Ihs Manufacturer ROCHESTER ELECTRONICS INC
    Part Package Code D2PAK Package Description TO-263,
    Pin Count 4 Analog IC - Other Type BRUSH DC MOTOR CONTROLLER
    JESD-30 Code R-PSSO-G15 JESD-609 Code e0
    Length 21.6 mm Moisture Sensitivity Level 1
    Number of Functions 1 Number of Terminals 15
    Package Body Material PLASTIC/EPOXY Package Code TO-263
    Package Shape RECTANGULAR Package Style SMALL OUTLINE
    Peak Reflow Temperature (Cel) 220 Qualification Status COMMERCIAL
    Supply Voltage-Max (Vsup) 42 V Supply Voltage-Min (Vsup) 4.5 V
    Supply Voltage-Nom (Vsup) 12 V Surface Mount YES
    Terminal Finish TIN LEAD Terminal Form GULL WING
    Terminal Pitch 1.4 mm Terminal Position SINGLE
    Time@Peak Reflow Temperature-Max (s) 10

    配送

    配送タイプ 配送料 リードタイム
    DHL DHL $20.00-$40.00 (0.50 KG) 2-5 日々
    Fedex フェデックス $20.00-$40.00 (0.50 KG) 2-5 日々
    UPS UPS $20.00-$40.00 (0.50 KG) 2-5 日々
    TNT TNT $20.00-$40.00 (0.50 KG) 2-5 日々
    EMS EMS $20.00-$40.00 (0.50 KG) 2-5 日々
    登録された航空便 登録された航空便 $20.00-$40.00 (0.50 KG) 2-5 日々

    処理時間:送料は地域や国によって異なります。

    支払い

    支払条件 ハンドフィー
    電信送金 電信送金 銀行手数料 US$30.00 を請求します。
    ペイパル ペイパル 4.0%のサービス料がかかります。
    クレジットカード クレジットカード 3.5%のサービス料がかかります。
    ウエスタンユニオン ウエスタンユニオン charge US.00 banking fee.
    送金サービス 送金サービス 銀行手数料は 0.00 米ドルかかります。

    保証

    1.購入した電子部品には365日保証が含まれており、製品の品質を保証します。

    2.受け取った商品の一部が完璧な品質ではない場合、当社は責任を持って返金または交換を手配します。 ただし、商品は元の状態のままでなければなりません。

    パッキング

    • 製品

      ステップ1 :製品

    • 真空包装

      ステップ2 :真空包装

    • 静電気防止袋

      ステップ3 :静電気防止袋

    • 個包装

      ステップ4 :個包装

    • 梱包箱

      ステップ5 :梱包箱

    • バーコード配送タグ

      ステップ6 :バーコード配送タグ

    すべての製品は静電気防止袋に梱包されます。 ESD 帯電防止保護を備えた状態で出荷されます。

    社外の ESD 梱包ラベルには、部品番号、ブランド、数量などの当社の情報が使用されます。

    私たちは出荷前にすべての商品を検査し、すべての製品が良好な状態であることを確認し、部品が新しいオリジナルでデータシートと一致していることを確認します。

    すべての商品に問題がないことを確認した後、梱包後、安全に梱包し、グローバルエクスプレスで発送します。 優れた耐穿刺性と耐引裂性を示し、シールの完全性も良好です。

    • ESD
    • ESD

    同等部品

    のために BTS781GP コンポーネントの場合は、これらの交換部品および代替部品を検討してください:

    部品番号

    ブランド

    パッケージ

    説明

    部品番号 :   BTS7750G

    ブランド :  

    パッケージ :   P-DSO-28

    説明 :   Motor / motion / ignition controllers & drivers quad d-mos sw driver trilith

    部品番号 :   BTS7810GP

    ブランド :  

    パッケージ :  

    説明 :  

    部品番号 :   BTS7960B

    ブランド :  

    パッケージ :   TO-263

    説明 :   High Current PN Half Bridge NovalithIC 43 A, 7 mз + 9 mз

    部品番号 :   BTS6143D

    ブランド :  

    パッケージ :   TO-252-5

    説明 :   Buffer/Inverter Based Peripheral Driver, 1 Driver, 8A, MOS, PSSO4, GREEN, PLASTIC, TO-252, DPAK-5

    パーツポイント

    • The BTS781GP is a smart two channel low-side power switch in a PG-DSO-14 package providing embedded protective functions. It is designed to drive resistive and inductive loads supported by features like diagnostic feedback and a short-circuit protection mechanism. Ideal for automotive applications, the chip allows for controlled power distribution and increased system reliability.
    • Equivalent

      The equivalent products of BTS781GP chip are BTS7810GP, BTS7810G, BTS7816G, and BTS7816GP. These chips are power switches for various automotive and industrial applications, providing protection and control functions.
    • Features

      - High side power switch with integrated vertical power FET - Overload protection - Current limitation - Short circuit protection - Thermal shutdown - Overvoltage protection - Shorted load protection - Diagnostic feedback voltage proportional to the load current - Operating voltage range from 6V to 18V - Maximum load current of 5.5A
    • Pinout

      The BTS781GP is a power switch intended for automotive applications with a pin count of 7. The functions include overvoltage protection, overload protection, short circuit protection, and thermal shutdown. It also features diagnostic feedback for monitoring the status of the power switch.
    • Manufacturer

      The BTS781GP is manufactured by Infineon Technologies AG, a German semiconductor manufacturer specializing in automotive, industrial, and power management technologies. They are a global company known for producing high-quality and innovative solutions for a variety of industries.
    • Application Field

      The BTS781GP is commonly used in automotive applications such as electric power steering, engine cooling fans, fuel pumps, and headlamp control. It is also suitable for industrial applications requiring high current switching such as motor control, power distribution, and power management systems.
    • Package

      The BTS781GP chip is a PowerSSO-36 package type, in the form of a surface-mount device (SMD). It measures 10.3mm x 12.5mm x 4mm in size.

    データシート PDF

    暫定仕様書 BTS781GP PDF ダウンロード

    私たちは高品質の製品、思いやりのあるサービス、販売後の保証を提供します

    • 製品

      豊富な商品を取り揃えておりますので、お客様の様々なニーズにお応え致します。

    • quantity

      最小注文数量は1個からとなります。

    • shipping

      最低国際配送料は0.00ドルから

    • 保証

      全商品365日品質保証

    評価とレビュー

    評価
    製品を評価してください。
    コメントを入力してください

    コメントはアカウントにログインしてから送信してください。

    提出する

    推薦する

    • IRF7424PBF

      IRF7424PBF

      INFINEON

      Low on-state resistance of 13.5mOhms

    • IRF540NSTRLPBF

      IRF540NSTRLPBF

      Infineon

      TO-263-3 packaged IRF540NSTRLPBF MOSFET with N-cha...

    • IRF7406TRPBF

      IRF7406TRPBF

      INFINEON

      P-channel MOSFET with a maximum voltage rating of ...

    • IRF7401TRPBF

      IRF7401TRPBF

      Infineon

      Suitable for applications requiring a current rati...

    • IRF7478TRPBF

      IRF7478TRPBF

      Infineon

      Transistor with a 60V maximum voltage, 7.6A curren...

    • IRL1004S

      IRL1004S

      Infineon Technologies Corporation

      N-Channel 40 V 130A (Tc) 3.8W (Ta), 200W (Tc) Surf...