注文金額が
$5000STM32WB55REV6
IC RF TxRx + MCU 802.15.4, Bluetooth Bluetooth v5.3, Thread, Zigbee® 2.405GHz ~ 2.48GHz 68-VFQFN Exposed Pad
ブランド: STMicroelectronics
製造元部品 #: STM32WB55REV6
データシート: STM32WB55REV6 データシート (PDF)
パッケージ/ケース: 68-VFQFNExposedPad
製品の種類: RF Transceiver ICs
STM32WB55REV6 概要
The STM32WB55REV6 is a formidable microcontroller unit designed for applications that require advanced processing power and energy efficiency. Its dual-core Arm Cortex-M4 and Cortex-M0+ processors, clocked at 64 MHz and 32 MHz respectively, deliver exceptional performance while consuming minimal power. With 256 Kbytes of Flash memory onboard, this MCU is equipped to handle even the most demanding tasks. Its support for Bluetooth LE 5.4, 802.15.4, Zigbee, Thread, and Matter protocols ensures seamless connectivity in diverse environments. Additionally, the STM32WB55REV6 offers USB compatibility, LCD interfacing capabilities, and AES-256 encryption for enhanced security
特徴
- Include ST state-of-the-art patented technology
- Radio
- 2.4 GHz
- RF transceiver supporting Bluetooth® 5.2specification, IEEE 802.15.4-2011 PHY and MAC, supporting Thread and Zigbee® 3.0
- RX sensitivity: -96 dBm (Bluetooth® Low Energy at 1 Mbps), -100 dBm (802.15.4)
- Programmable output power up to +6 dBm with 1 dB steps
- Integrated balun to reduce BOM
- Support for 2 Mbps
- Dedicated Arm® 32-bit Cortex® M0+ CPU for real-time Radio layer
- Accurate RSSI to enable power control
- Suitable for systems requiring compliance with radio frequency regulations ETSI EN 300 328, EN 300 440, FCC CFR47 Part 15 and ARIB STD-T66
- Support for external PA
- Available integrated passive device (IPD) companion chip for optimized matching solution (MLPF-WB-01E3 or MLPF-WB-02E3)
- Ultra-low-power platform
- 1.71 to 3.6 V power supply
- – 40 °C to 85 / 105 °C temperature ranges
- 13 nA shutdown mode
- 600 nA Standby mode + RTC + 32 KB RAM
- 2.1 µA Stop mode + RTC + 256 KB RAM
- Active-mode MCU: < 53 µA / MHz when RF and SMPS on
- Radio: Rx 4.5 mA / Tx at 0 dBm 5.2 mA
- Core: Arm® 32-bit Cortex®-M4 CPU with FPU, adaptive real-time accelerator (ART Accelerator) allowing 0-wait-state execution from Flash memory, frequency up to 64 MHz, MPU, 80 DMIPS and DSP instructions
- Performance benchmark
- 1.25 DMIPS/MHz (Drystone 2.1)
- 219.48 CoreMark® (3.43 CoreMark/MHz at 64 MHz)
- Energy benckmark
- 303 ULPMark™ CP score
- Supply and reset management
- High efficiency embedded SMPS step-down converter with intelligent bypass mode
- Ultra-safe, low-power BOR (brownout reset) with five selectable thresholds
- Ultra-low-power POR/PDR
- Programmable voltage d
仕様
パラメータ | 価値 | パラメータ | 価値 |
---|---|---|---|
Series | STM32WB | Package | Tray |
Product Status | Active | Programmabe | Not Verified |
Type | TxRx + MCU | RF Family/Standard | 802.15.4, Bluetooth |
Protocol | Bluetooth v5.3, Thread, Zigbee® | Modulation | GFSK |
Frequency | 2.405GHz ~ 2.48GHz | Data Rate (Max) | 2Mbps |
Power - Output | 6dBm | Sensitivity | -100dBm |
Memory Size | 512kB Flash, 256kB SRAM | Serial Interfaces | ADC, I2C, SPI, UART, USART, USB |
GPIO | 49 | Voltage - Supply | 1.71V ~ 3.6V |
Current - Receiving | 4.5mA ~ 7.9mA | Current - Transmitting | 5.2mA ~ 12.7mA |
Operating Temperature | -40°C ~ 85°C (TA) | Mounting Type | Surface Mount |
Package / Case | 68-VFQFN Exposed Pad | Supplier Device Package | 68-VFQFPN (8x8) |
Base Product Number | STM32 |
配送
配送タイプ | 配送料 | リードタイム | |
---|---|---|---|
DHL | $20.00-$40.00 (0.50 KG) | 2-5 日々 | |
フェデックス | $20.00-$40.00 (0.50 KG) | 2-5 日々 | |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 日々 | |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 日々 | |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 日々 | |
登録された航空便 | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
処理時間:送料は地域や国によって異なります。
支払い
支払条件 | ハンドフィー | |
---|---|---|
電信送金 | 銀行手数料 US$30.00 を請求します。 | |
ペイパル | 4.0%のサービス料がかかります。 | |
クレジットカード | 3.5%のサービス料がかかります。 | |
ウエスタンユニオン | charge US.00 banking fee. | |
送金サービス | 銀行手数料は 0.00 米ドルかかります。 |
保証
1.購入した電子部品には365日保証が含まれており、製品の品質を保証します。
2.受け取った商品の一部が完璧な品質ではない場合、当社は責任を持って返金または交換を手配します。 ただし、商品は元の状態のままでなければなりません。
パッキング
-
ステップ1 :製品
-
ステップ2 :真空包装
-
ステップ3 :静電気防止袋
-
ステップ4 :個包装
-
ステップ5 :梱包箱
-
ステップ6 :バーコード配送タグ
すべての製品は静電気防止袋に梱包されます。 ESD 帯電防止保護を備えた状態で出荷されます。
社外の ESD 梱包ラベルには、部品番号、ブランド、数量などの当社の情報が使用されます。
私たちは出荷前にすべての商品を検査し、すべての製品が良好な状態であることを確認し、部品が新しいオリジナルでデータシートと一致していることを確認します。
すべての商品に問題がないことを確認した後、梱包後、安全に梱包し、グローバルエクスプレスで発送します。 優れた耐穿刺性と耐引裂性を示し、シールの完全性も良好です。
私たちは高品質の製品、思いやりのあるサービス、販売後の保証を提供します
-
豊富な商品を取り揃えておりますので、お客様の様々なニーズにお応え致します。
-
最小注文数量は1個からとなります。
-
最低国際配送料は0.00ドルから
-
全商品365日品質保証