このウェブサイトは Cookie を使用しています。このサイトを使用すると、Cookie の使用に同意したことになります。詳細については、こちらをご覧くださいプライバシーポリシー.

Infineon TDA21472 Datasheet: OptiMOS™ Powerstage DC-DC Converter Voltage Regulator

更新時間： Mar 01, 2024 閲覧数： 437

The TDA21472 OptiMOS™ Powerstage is a cutting-edge DC-DC converter voltage regulator designed to meet the demanding requirements of modern electronics. With a range of innovative features, this power stage is poised to revolutionize power delivery in various applications, from CPUs to GPUs and DDR memory arrays.

TDA21472 Features

Co-Packaged Design

The TDA21472 integrates a driver, Schottky diode, and high-side and low-side MOSFETs into a single package, optimizing space and simplifying implementation.

Enhanced Current Sensing

With a 5-mV/A on-chip MOSFET current sensing mechanism, coupled with temperature-compensated reporting, the TDA21472 achieves superior accuracy in current sensing, crucial for reliable system performance.

Wide Voltage Range

Operating with an input voltage (VIN) range of 4.25 V to 16 V, and VCC and VDRV supply ranging from 4.25 V to 5.5 V, the TDA21472 offers versatility in various power supply configurations.

High Output Capability

Capable of delivering an output current of up to 70 A, this power stage ensures robust performance even under heavy loads.

TDA21472 Pinout

The TDA21472 is a synchronous buck converter integrated circuit (IC) manufactured by Infineon Technologies. It integrates a low quiescent-current synchronous buck gate-driver IC, along with a Schottky diode, and high-side and low-side MOSFETs, in a single package.

Power Ground (PGND): Pins 5, 7-9, 20-24, 40. These pins connect to the power ground and also serve as the ground connection for the low-side MOSFET.

Signal Ground (LGND): Pin 2. This pin is the signal ground, and all other signal pins are referenced to this ground.

Input Voltage (VIN): Pin 1. This pin supplies the input voltage to the IC.

Bootstrap Capacitor (BOOT): Pin 32. This pin connects to the bootstrap capacitor, which provides the gate drive voltage for the high-side MOSFET.

Enable (EN): Pin 3. This pin controls the enable/disable functionality of the IC. A logic high enables the IC, while a logic low disables it.

Switching Node (SW): Pin 10-19. This pin is the high current switching node of the synchronous buck converter.

Low-Side MOSFET Driver (GATEL): Pin 6, 41. This pin is the low-side MOSFET driver output. It can be connected to a test point to observe the waveform.

Other Pins: Several other pins are present on the IC for functions like soft-start, feedback voltage, and fault protection.

TDA21472 Advanced Functionality

High-Speed Operation

Operating at frequencies of up to 1.5 MHz, the TDA21472 enables high-performance transient response, reducing the need for large output inductance and capacitance while maintaining exceptional efficiency.

Comprehensive Protection

Equipped with features such as VCC/VDRV under-voltage lockout (UVLO), thermal shutdown, and cycle-by-cycle over-current protection, the TDA21472 ensures the safety and longevity of the system.

Power Saving Modes

The power stage includes a deep-sleep mode, significantly reducing power consumption during idle periods, ideal for systems operating in low-power states.

TDA21472 Application Flexibility

Tailored for Server Applications

Optimized for CPU core power delivery in server applications, the TDA21472 meets the stringent requirements of the server market, making it equally suitable for GPU and DDR memory designs.

Body-Braking Support

Supporting Body-Braking load transient, the TDA21472 enhances transient performance by quickly disabling MOSFETs in response to PWM tri-state signals.

Diode Emulation Mode

Through PWM tri-state signals, the power stage supports diode emulation mode, enhancing light-load efficiency by preventing conduction loss caused by negative inductor current.

TDA21472 Block Diagram

TDA21472 Product Validation and Reliability

Industrial Qualification

The TDA21472 is qualified for industrial applications according to the relevant tests of JEDEC47/20/22, ensuring reliability and durability in harsh operating environments.

TDA21472 Package

The TDA21472, a formidable DC-DC converter voltage regulator, is encapsulated within a PQFN (Plastic Quad Flat No-Lead) package measuring 5 mm x 6 mm. This compact yet robust packaging is engineered to optimize space utilization while ensuring efficient heat dissipation and reliable electrical connections.

The PQFN package dimensions of 5 mm x 6 mm strike an optimal balance between compactness and ease of implementation. Its flat, no-lead design simplifies surface mount assembly processes, enhancing manufacturability and reducing production costs.

Conclusion

The TDA21472 OptiMOS™ Powerstage represents a paradigm shift in DC-DC converter voltage regulation. With its integrated design, advanced features, and unparalleled performance, it offers a versatile solution for a wide range of applications, from high-performance computing to industrial systems. Whether it's maximizing efficiency, ensuring system reliability, or reducing footprint, the TDA21472 sets a new standard in power delivery technology.

前：Decoding Ball Grid Array (BGA) Technology: A Comprehensive Guide

Stella Brinkley

Stella Brinkley is a senior electronics engineer with 6 years of experience, specializing in the detailed study of resistor, transistor and package design. Her comprehensive knowledge allows her to drive innovation and excellence in the electronics industry.