このウェブサイトは Cookie を使用しています。このサイトを使用すると、Cookie の使用に同意したことになります。詳細については、こちらをご覧くださいプライバシーポリシー.

画像は参考用です。製品仕様を参照してください。

TI UCC27424MDGNREP

Name: UCC27424MDGNREP
Rating: 4.5 (10 reviews)

Low-Side Gate Driver IC Non-Inverting 8-HVSSOP

ブランド: TI

製造元部品 #: UCC27424MDGNREP

データシート: UCC27424MDGNREP データシート (PDF)

パッケージ/ケース: HVSSOP-8

製品の種類: MOSFET & Power Driver ICs

RoHS ステータス:

在庫状況: 2000 個、新しいオリジナル

Warranty: 1 Year Ovaga Warranty - Find Out More

ボムに追加

簡単な見積もり

RFQを提出してください UCC27424MDGNREP またはメールでご連絡ください: メール: [email protected], 12時間以内にご連絡させていただきます。

数量^*

メール^*

連絡先名^*

会社

述べる

UCC27424MDGNREP 概要

The UCC27423 and UCC27424 high-speed MOSFET drivers can deliver large peak currents into capacitive loads. Two standard logic options are offered – dual inverting and dual noninverting drivers. The UCC27424 thermally-enhanced 8-pin PowerPAD™ MSOP package (DGN) drastically lowers the thermal resistance to improve long-term reliability. The UCC27423 is offered in a standard SOIC-8 (D) package.

Using a design that inherently minimizes shoot-through current, this driver delivers 4 A of current where it is needed most – at the Miller plateau region during the MOSFET switching transition. A unique bipolar and MOSFET hybrid output stage in parallel also allows efficient current sourcing and sinking at low supply voltages.

The UCC27423 and UCC27424 provide enable (ENB) functions to better control the operation of the driver applications. ENBA and ENBB are implemented on pins 1 and 8, which previously were left unused in the industry-standard pinout. ENBA and ENBB are pulled up internally to V_DD for active-high logic and can be left open for standard operation.

特徴

Industry-Standard Pinout
Enable Functions for Each Driver
High Current-Drive Capability of ±4 A
Unique Bipolar and CMOS True-Drive Output
Stage Provides High Current at MOSFET Miller
Thresholds
TTL-/CMOS-Compatible Inputs Independent of
Supply Voltage
20-ns Typical Rise and 15-ns Typical Fall Times
With 1.8-nF Load
Typical Propagation Delay Times of 25 ns
With Input Falling and 35 ns With Input Rising
4.5-V to 15-V Supply Voltage
Dual Outputs can be Paralleled for Higher Drive
Current
Available in Thermally-Enhanced MSOP
PowerPAD™ Package With 4.7°C/W R_θJC
Supports Defense, Aerospace, and Medical
Applications
- Controlled Baseline
- One Assembly/Test Site
- One Fabrication Site
- Extended Product Life Cycle
- Extended Product-Change Notification
- Product Traceability
APPLICATIONS
- Switch-Mode Power Supplies
- DC/DC Converters
- Motor Controllers
- Line Drivers
- Class-D Switching Amplifiers

All other trademarks are the property of their respective owners

仕様

パラメータ	価値	パラメータ	価値
Number of channels	2	Power switch	IGBT, MOSFET
Peak output current (A)	4	Input VCC (min) (V)	4.5
Input VCC (max) (V)	15	Features	Enable pin
Operating temperature range (°C)	-55 to 125	Rise time (ns)	20
Fall time (ns)	15	Propagation delay time (µs)	0.025
Input negative voltage (V)	0	Rating	HiRel Enhanced Product
Driver configuration	Dual inputs

配送

	配送料	リードタイム
DHL	$20.00-$40.00 (0.50 KG)	2-5 日々
フェデックス	$20.00-$40.00 (0.50 KG)	2-5 日々
UPS	$20.00-$40.00 (0.50 KG)	2-5 日々
TNT	$20.00-$40.00 (0.50 KG)	2-5 日々
EMS	$20.00-$40.00 (0.50 KG)	2-5 日々
登録された航空便	$20.00-$40.00 (0.50 KG)	2-5 日々

処理時間：送料は地域や国によって異なります。

支払い

支払条件		ハンドフィー
	電信送金	銀行手数料 US$30.00 を請求します。
	ペイパル	4.0％のサービス料がかかります。
	クレジットカード	3.5％のサービス料がかかります。
	ウエスタンユニオン	charge US.00 banking fee.
	送金サービス	銀行手数料は 0.00 米ドルかかります。

保証

1.購入した電子部品には365日保証が含まれており、製品の品質を保証します。

2.受け取った商品の一部が完璧な品質ではない場合、当社は責任を持って返金または交換を手配します。ただし、商品は元の状態のままでなければなりません。

パッキング

ステップ1 :製品
ステップ2 :真空包装
ステップ3 :静電気防止袋
ステップ4 :個包装
ステップ5 :梱包箱
ステップ6 :バーコード配送タグ

すべての製品は静電気防止袋に梱包されます。 ESD 帯電防止保護を備えた状態で出荷されます。

社外の ESD 梱包ラベルには、部品番号、ブランド、数量などの当社の情報が使用されます。

私たちは出荷前にすべての商品を検査し、すべての製品が良好な状態であることを確認し、部品が新しいオリジナルでデータシートと一致していることを確認します。

すべての商品に問題がないことを確認した後、梱包後、安全に梱包し、グローバルエクスプレスで発送します。優れた耐穿刺性と耐引裂性を示し、シールの完全性も良好です。

パーツポイント

The UCC27424MDGNREP chip is a high-speed, dual-channel gate driver designed for driving power MOSFETs and IGBTs in applications like motor control and power supplies. It offers high peak output current and fast switching speeds, enhancing system efficiency and reliability. Additionally, its small form factor and robust design make it suitable for various industrial and automotive applications.
Equivalent

Equivalent products to the UCC27424MDGNREP chip include the UCC27423, UCC27425, and UCC27426 from Texas Instruments. These devices are high-speed, dual-channel MOSFET drivers with similar specifications and features.
Features

UCC27424MDGNREP is a dual-channel, high-speed, low-side gate driver with 4-A source and sink current capabilities. It features TTL input thresholds, wide supply voltage range, matched propagation delays, and an active Miller clamp. It is suitable for use in high-frequency switching applications in power electronics.
Pinout

The UCC27424MDGNREP is a dual-channel, high-speed, low-side gate driver IC. It has 8 pins and functions to efficiently drive power MOSFETs and IGBTs in high-frequency switching applications. The pins include input, output, and supply connections for each channel, along with ground and enable pins.
Manufacturer

Texas Instruments is the manufacturer of the UCC27424MDGNREP. It is an American company that designs and manufactures semiconductors and integrated circuits for a variety of applications, including power management, analog, and digital signal processing.
Application Field

The UCC27424MDGNREP is commonly used in applications requiring high-speed, high-current drive capabilities, such as power inverters, motor control, switch-mode power supplies, and DC-DC converters. Its features make it suitable for various power electronics applications where fast and efficient switching is crucial.
Package

The UCC27424MDGNREP chip comes in a Surface Mount Package. It has a 14-Pin SOIC (Small Outline Integrated Circuit) form factor. The size of the chip is 5mm x 5mm.