注文金額が
$5000MX25L51245GXDI-10G
Low 8ns Access Time for Fast Data Transfer
![ISO14001](/img/about/iso14001.png)
![ISO9001](/img/about/iso9001.png)
![DUNS](/img/about/duns.png)
ブランド: Macronix
製造元部品 #: MX25L51245GXDI-10G
データシート: MX25L51245GXDI-10G データシート (PDF)
パッケージ/ケース: 24-TBGA
製品の種類: メモリ
MX25L51245GXDI-10G 概要
The Macronix MX25L51245GXDI-10G flash memory chip is a top-of-the-line product in the world of storage devices. With its 512Mb capacity and support for both SPI and QPI interfaces, this chip ensures high-speed data transfers and efficient data management. Its 4KB erasable sector size allows for precise data storage and organization, while its quick erase and program capabilities make it a valuable asset for time-sensitive applications
特徴
- GENERAL
- Serial Peripheral Interface (SPI) compatible -- Mode 0 and Mode 3
- 1,048,576 x 1 bit structure
- 32 Equal Sectors with 4K byte each
- - Any Sector can be erased individually
- 2 Equal Blocks with 64K byte each
- - Any Block can be erased individually
- Single Power Supply Operation
- - 2.7 to 3.6 volt for read, erase, and program operations
- Latch-up protected to 100mA from -1V to Vcc +1V
- Low Vcc write inhibit is from 1.5V to 2.5V
- PERFORMANCE
- High Performance
- - Fast access time: 85MHz serial clock (15pF + 1TTL Load) and 66MHz serial clock (30pF + 1TTL Load)
- - Fast program time: 1.4ms(typ.) and 5ms(max.)/page (256-byte per page)
- - Fast erase time: 60ms(typ.) and 120ms(max.)/sector (4K-byte per sector) ; 1s(typ.) and 2s(max.)/block (64K-byte per block)
- Low Power Consumption
- - Low active read current: 12mA(max.) at 85MHz, 8mA(max.) at 66MHz and 4mA(max.) at 33MHz
- - Low active programming current: 15mA (max.)
- - Low active erase current: 15mA (max.)
- - Low standby current: 10uA (max.)
- - Deep power-down mode 1uA (typical)
- Minimum 100,000 erase/program cycles
- SOFTWARE FEATURES
- Input Data Format
- - 1-byte Command code
- Block Lock protection
- - The BP0~BP1 status bit defines the size of the area to be software protected against Program and Erase instructions.
- Auto Erase and Auto Program Algorithm
- - Automatically erases and verifies data at selected sector
- - Automatically programs and verifies data at selected page by an internal algorithm that automatically times the program pulse widths (Any page to be programed should have page in the erased state first)
- Status Register Feature
- Electronic Identification
- - JEDEC 2-byte Device ID
- - RES command, 1-byte Device ID
- HARDWARE FEATURES
- SCLK Input
- - Serial clock input
- SI Input
- - Serial Data Input
- SO Output
- - Serial Data Output
- WP# pin
- - Hardware write protection
- HOLD# pin
- - pause the chip without diselecting the chip
- PACKAGE
- - 8-pin SOP (150mil)
- - 8-land USON (2x3x0.6mm)
- - All Pb-free devices are RoHS Compliant
仕様
パラメータ | 価値 | パラメータ | 価値 |
---|---|---|---|
Series | MXSMIO™ | Package | Tray |
Product Status | Not For New Designs | Programmabe | Verified |
Memory Type | Non-Volatile | Memory Format | FLASH |
Technology | FLASH - NOR | Memory Size | 512Mbit |
Memory Organization | 64M x 8 | Memory Interface | SPI - Quad I/O, QPI, DTR |
Clock Frequency | 166 MHz | Write Cycle Time - Word, Page | 60µs, 750µs |
Voltage - Supply | 2.7V ~ 3.6V | Operating Temperature | -40°C ~ 85°C (TA) |
Mounting Type | Surface Mount | Package / Case | 24-TBGA |
Supplier Device Package | 24-CSPBGA (6x8) |
配送
配送タイプ | 配送料 | リードタイム | |
---|---|---|---|
![]() |
DHL | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
![]() |
フェデックス | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
![]() |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
![]() |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
![]() |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
![]() |
登録された航空便 | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
処理時間:送料は地域や国によって異なります。
支払い
支払条件 | ハンドフィー | |
---|---|---|
![]() |
電信送金 | 銀行手数料 US$30.00 を請求します。 |
![]() |
ペイパル | 4.0%のサービス料がかかります。 |
![]() |
クレジットカード | 3.5%のサービス料がかかります。 |
![]() |
ウエスタンユニオン | charge US.00 banking fee. |
![]() |
送金サービス | 銀行手数料は 0.00 米ドルかかります。 |
保証
1.購入した電子部品には365日保証が含まれており、製品の品質を保証します。
2.受け取った商品の一部が完璧な品質ではない場合、当社は責任を持って返金または交換を手配します。 ただし、商品は元の状態のままでなければなりません。
パッキング
-
ステップ1 :製品
-
ステップ2 :真空包装
-
ステップ3 :静電気防止袋
-
ステップ4 :個包装
-
ステップ5 :梱包箱
-
ステップ6 :バーコード配送タグ
すべての製品は静電気防止袋に梱包されます。 ESD 帯電防止保護を備えた状態で出荷されます。
社外の ESD 梱包ラベルには、部品番号、ブランド、数量などの当社の情報が使用されます。
私たちは出荷前にすべての商品を検査し、すべての製品が良好な状態であることを確認し、部品が新しいオリジナルでデータシートと一致していることを確認します。
すべての商品に問題がないことを確認した後、梱包後、安全に梱包し、グローバルエクスプレスで発送します。 優れた耐穿刺性と耐引裂性を示し、シールの完全性も良好です。
私たちは高品質の製品、思いやりのあるサービス、販売後の保証を提供します
-
豊富な商品を取り揃えておりますので、お客様の様々なニーズにお応え致します。
-
最小注文数量は1個からとなります。
-
最低国際配送料は0.00ドルから
-
全商品365日品質保証