注文金額が
$5000Microchip MCP2515-E/ML
Flexible and scalable solution for integrating CAN network into a variety of industrial automation systems and devices
ブランド: Microchip Technology, Inc
製造元部品 #: MCP2515-E/ML
データシート: MCP2515-E/ML Datasheet (PDF)
パッケージ/ケース: QFN-20
製品の種類: Controllers
MCP2515-E/ML 概要
With its versatile features and high level of integration, the MCP2515-E/ML is a reliable and efficient solution for implementing robust and scalable CAN bus systems across various industries and applications
特徴
- This controller supports SPI interface for communication
- It features three priority levels for transmit buffer and two receive buffers with prioritization
- The device operates on a 5V power supply for reliable performance
応用
- Key component for truck CAN networks
- Ensures reliable communication in cars
仕様
パラメータ | 価値 | パラメータ | 価値 |
---|---|---|---|
Bitrate Max [MBits/s] | 1 | CAN Controllers | 1 |
Internal CAN Clock | No | LPM Current Max [uA] | 0 |
Message RAM [KB] | 0 | Operating Voltage Min. [V] | 2.7 |
Operating Voltage Max. [V] | 5.5 | Rx Buffers | 2 |
SPI Interface | Yes | Serial Bus Speed [MHz] | 10 |
Standby Current Max [uA] | 0 | Operating Temperature Min. [°C] | -40 |
Operating Temperature Max. [°C] | 125 | Time Stamp (Bits) | 0 |
TX Buffers | 3 | TX Event FIFO | 0 |
TX Queue | 0 |
配送
配送タイプ | 配送料 | リードタイム | |
---|---|---|---|
DHL | $20.00-$40.00 (0.50 KG) | 2-5 日々 | |
フェデックス | $20.00-$40.00 (0.50 KG) | 2-5 日々 | |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 日々 | |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 日々 | |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 日々 | |
登録された航空便 | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
処理時間:送料は地域や国によって異なります。
支払い
支払条件 | ハンドフィー | |
---|---|---|
電信送金 | 銀行手数料 US$30.00 を請求します。 | |
ペイパル | 4.0%のサービス料がかかります。 | |
クレジットカード | 3.5%のサービス料がかかります。 | |
ウエスタンユニオン | charge US.00 banking fee. | |
送金サービス | 銀行手数料は 0.00 米ドルかかります。 |
保証
1.購入した電子部品には365日保証が含まれており、製品の品質を保証します。
2.受け取った商品の一部が完璧な品質ではない場合、当社は責任を持って返金または交換を手配します。 ただし、商品は元の状態のままでなければなりません。
パッキング
-
ステップ1 :製品
-
ステップ2 :真空包装
-
ステップ3 :静電気防止袋
-
ステップ4 :個包装
-
ステップ5 :梱包箱
-
ステップ6 :バーコード配送タグ
すべての製品は静電気防止袋に梱包されます。 ESD 帯電防止保護を備えた状態で出荷されます。
社外の ESD 梱包ラベルには、部品番号、ブランド、数量などの当社の情報が使用されます。
私たちは出荷前にすべての商品を検査し、すべての製品が良好な状態であることを確認し、部品が新しいオリジナルでデータシートと一致していることを確認します。
すべての商品に問題がないことを確認した後、梱包後、安全に梱包し、グローバルエクスプレスで発送します。 優れた耐穿刺性と耐引裂性を示し、シールの完全性も良好です。
パーツポイント
-
The MCP2515-E/ML is a stand-alone CAN controller with a SPI interface, designed for high-speed CAN applications. It is commonly used in automotive and industrial applications for connecting microcontrollers to CAN networks. The chip supports both standard and extended data frames, as well as error detection and filtering functionalities. It is a highly reliable and efficient solution for CAN communication.
-
Equivalent
The equivalent products of MCP2515-E/ML chip are Texas Instruments TLE6251-2G CAN controller and Microchip ATA6563 CAN transceiver. Both are suitable for use in CAN controller and transceiver applications, offering similar capabilities and performance to the MCP2515-E/ML chip. -
Features
1. SPI interface with up to 10 MHz 2. CAN V2.0B up to 1 Mbps 3. 2 receive buffers with prioritized message storage 4. 3 transmit buffers with prioritized transmit order 5. Standalone operation or combination with microcontroller 6. 0 to 8 MHz crystal oscillator 7. Sleep and low power modes for power management -
Pinout
The MCP2515-E/ML is an 8-pin integrated circuit with the following functions: a high-speed controller area network (CAN) interface, a serial peripheral interface (SPI), and the ability to wake-up the microcontroller upon the reception of a message. -
Manufacturer
Microchip Technology is the manufacturer of the MCP2515-E/ML. It is an American company that designs and manufactures microcontrollers, mixed-signal, analog, and flash-IP integrated circuits. These products are used in a wide variety of applications in the automotive, communications, computing, consumer, and industrial control markets. -
Application Field
The MCP2515-E/ML is commonly used in automotive and industrial applications for controlling and monitoring the communication between a microcontroller and the CAN bus. It is used in automotive systems such as engine management, body control modules, and infotainment systems, as well as in industrial automation, medical devices, and communication systems. -
Package
The MCP2515-E/ML chip is in a surface mount package, with a small form factor of 16-pin DFN (3x3mm) and a standard size of 8-pin SOIC.
データシート PDF
私たちは高品質の製品、思いやりのあるサービス、販売後の保証を提供します
-
豊富な商品を取り揃えておりますので、お客様の様々なニーズにお応え致します。
-
最小注文数量は1個からとなります。
-
最低国際配送料は0.00ドルから
-
全商品365日品質保証
Ovaga's electronic components are always top-notch. The shipping is prompt and the customer service is exceptional. Highly recommend.