ADI DS28E01P-100+T
EEPROM 1Kb Protected 1-Wire EEPROM with SHA-1 Engine
ブランド: Analog Devices, Inc
製造元部品 #: DS28E01P-100+T
データシート: DS28E01P-100+T データシート (PDF)
パッケージ/ケース: TSOC-6
RoHS ステータス:
在庫状況: 2899 個、新しいオリジナル
製品の種類: メモリ
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
*すべての価格は米ドルです
数量 | 単価 | 外部価格 |
---|---|---|
1 | $1.460 | $1.460 |
10 | $1.232 | $12.320 |
30 | $1.107 | $33.210 |
100 | $0.903 | $90.300 |
500 | $0.840 | $420.000 |
1000 | $0.812 | $812.000 |
In Stock:2899 PCS
DS28E01P-100+T 概要
The DS28E01-100 combines 1024 bits of EEPROM with challenge-and-response authentication security implemented with the ISO/IEC 10118-3 Secure Hash Algorithm (SHA-1). The 1024-bit EEPROM array is configured as four pages of 256 bits with a 64-bit scratchpad to perform write operations. All memory pages can be write protected, and one page can be put in EPROM-emulation mode, where bits can only be changed from a 1 to a 0 state. Each DS28E01-100 has its own guaranteed unique 64-bit ROM registration number that is factory lasered into the chip. The DS28E01-100 communicates over the single-contact 1-Wire® bus. The communication follows the standard 1-Wire protocol with the registration number acting as the node address in the case of a multidevice 1-Wire network.
特徴
- 1024 Bits of EEPROM Memory Partitioned Into Four Pages of 256 Bits
- On-Chip 512-Bit SHA-1 Engine to Compute 160-Bit Message Authentication Codes (MAC) and to Generate Secrets
- Write Access Requires Knowledge of the Secret and the Capability of Computing and Transmitting a 160-Bit MAC as Authorization
- User-Programmable Page Write Protection for Page 0, Page 3, or All Four Pages Together
- User-Programmable OTP EPROM Emulation Mode for Page 1 ("Write to 0")
- Communicates to Host with a Single Digital Signal at 15.3kbps or 90.9kbps Using 1-Wire Protocol
- Switchpoint Hysteresis and Filtering to Optimize Performance in the Presence of Noise
- Reads and Writes Over a Wide Voltage Range of 2.8V to 5.25V from -40°C to +85°C
- 6-Lead TSOC and TDFN or 2-Lead TO-92 and SFN Packages
応用
- Accessory/PCB Identification
- Identification and authentication of consumables
- Ink and Toner Print Cartridge Identification
- Intellectual Property, License Management
- Sensor Calibration and Authentication
- System Programmable Feature Control
仕様
パラメータ | 価値 | パラメータ | 価値 |
---|---|---|---|
Pin Count | 6 | Package Category | Other |
Released Date | Jul 7, 2021 |
配送
配送タイプ | 配送料 | リードタイム | |
---|---|---|---|
DHL | $20.00-$40.00 (0.50 KG) | 2-5 日々 | |
フェデックス | $20.00-$40.00 (0.50 KG) | 2-5 日々 | |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 日々 | |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 日々 | |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 日々 | |
登録された航空便 | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
処理時間:送料は地域や国によって異なります。
支払い
支払条件 | ハンドフィー | |
---|---|---|
電信送金 | 銀行手数料 US$30.00 を請求します。 | |
ペイパル | 4.0%のサービス料がかかります。 | |
クレジットカード | 3.5%のサービス料がかかります。 | |
ウエスタンユニオン | charge US.00 banking fee. | |
送金サービス | 銀行手数料は 0.00 米ドルかかります。 |
保証
1.購入した電子部品には365日保証が含まれており、製品の品質を保証します。
2.受け取った商品の一部が完璧な品質ではない場合、当社は責任を持って返金または交換を手配します。 ただし、商品は元の状態のままでなければなりません。
パッキング
-
ステップ1 :製品
-
ステップ2 :真空包装
-
ステップ3 :静電気防止袋
-
ステップ4 :個包装
-
ステップ5 :梱包箱
-
ステップ6 :バーコード配送タグ
すべての製品は静電気防止袋に梱包されます。 ESD 帯電防止保護を備えた状態で出荷されます。
社外の ESD 梱包ラベルには、部品番号、ブランド、数量などの当社の情報が使用されます。
私たちは出荷前にすべての商品を検査し、すべての製品が良好な状態であることを確認し、部品が新しいオリジナルでデータシートと一致していることを確認します。
すべての商品に問題がないことを確認した後、梱包後、安全に梱包し、グローバルエクスプレスで発送します。 優れた耐穿刺性と耐引裂性を示し、シールの完全性も良好です。
パーツポイント
-
The DS28E01P-100+T is a 1-Wire EEPROM chip that features a unique 64-bit serial number and a customizable user memory. It supports low-power operation and secure data storage. This chip is commonly used in applications requiring authentication, identification, and secure data logging.
-
Equivalent
Equivalent products of DS28E01P-100+T chip are DS28E01-100+, DS28E01-100, DS28E01-100U+, and DS28E01-100T+. These chips have similar functionalities and features, including one-wire communication, unique 64-bit ROM ID, and cryptographic capabilities. They can be used interchangeably in applications requiring secure authentication and secure data transfer. -
Features
1. Secure authenticator with SHA-1 engine. 2. Operation voltage range of 2.8V to 5.5V. 3. Single contact 1-Wire interface. 4. Unique factory-programmed 64-bit ROM ID. 5. Low active supply current of 1.5mA. 6. Dual operating modes: standard and overdrive. -
Pinout
The DS28E01P-100+T has a 6-pin SOT-23 package and functions as a 1-Wire EEPROM memory chip. Pinout: 1 - VDD (power supply), 2 - GND (ground), 3 - DQ (data I/O), 4 - NC (no connection), 5 - NC, 6 - NC. -
Manufacturer
The manufacturer of the DS28E01P-100+T is Maxim Integrated. Maxim Integrated is an American multinational company that designs, manufactures, and sells analog and mixed-signal integrated circuits. They are known for their high-performance semiconductor products used in a wide range of applications, including automotive, industrial, healthcare, and consumer electronics. -
Application Field
The DS28E01P-100+T is commonly used in applications such as Electronic device authentication, IoT security, Medical devices, and Secure product packaging. It provides a unique and unchangeable 64-bit Identification Number for authenticating and securing electronic components and systems. -
Package
The DS28E01P-100+T chip comes in a TSSOP-3 package type, with a 2.9mm x 2.8mm form factor, and a size of 3 bytes.
私たちは高品質の製品、思いやりのあるサービス、販売後の保証を提供します
-
豊富な商品を取り揃えておりますので、お客様の様々なニーズにお応え致します。
-
最小注文数量は1個からとなります。
-
最低国際配送料は0.00ドルから
-
全商品365日品質保証