このウェブサイトは Cookie を使用しています。このサイトを使用すると、Cookie の使用に同意したことになります。詳細については、こちらをご覧くださいプライバシーポリシー.

画像は参考用です。製品仕様を参照してください。

TI WL1807MODGIMOCR

Name: WL1807MODGIMOCR
Rating: 4.5 (10 reviews)

Multiprotocol Modules WL18xxMOD Dual-Band Ind Mod

ブランド: Ti

製造元部品 #: WL1807MODGIMOCR

データシート: WL1807MODGIMOCR データシート (PDF)

パッケージ/ケース: QFM100

製品の種類: Combo Wireless Module

RoHS ステータス:

在庫状況: 1115 個、新しいオリジナル

Warranty: 1 Year Ovaga Warranty - Find Out More

ボムに追加

簡単な見積もり

RFQを提出してください WL1807MODGIMOCR またはメールでご連絡ください: メール: [email protected], 12時間以内にご連絡させていただきます。

数量^*

メール^*

連絡先名^*

会社

述べる

WL1807MODGIMOCR 概要

The certified WiLink™ 8 module from TI offers high throughput and extended range along with Wi-Fi^® and Bluetooth^® coexistence (WL1837MOD only) in a power-optimized design. The WL18x7MOD is a Wi-Fi, dual-band, 2.4- and 5-GHz module solution with two antennas supporting industrial temperature grade. The device is FCC, IC, ETSI/CE, and TELEC certified for AP (with DFS support) and client. TI offers drivers for high-level operating systems, such as Linux and Android™. Additional drivers, such as WinCE and RTOS, which includes QNX, Nucleus, ThreadX, and FreeRTOS, are supported through third parties.

特徴

General
- Integrates RF, power amplifiers (PAs), clock, RF switches, filters, passives, and power management
- Quick hardware design with TI module collateral and reference designs
- Operating temperature: –40°C to +85°C industrial temperature grade
- Small form factor: 13.3 × 13.4 × 2 mm
- 100-pin MOC package
- FCC, IC, ETSI/CE, and TELEC certified with PCB, dipole, chip, and PIFA antennas
Wi-Fi
- WLAN baseband processor and RF transceiver support of IEEE Std 802.11a, 802.11b, 802.11g, and 802.11n
- 20- and 40-MHz SISO and 20-MHz 2 × 2 MIMO at 2.4 GHz for high throughput: 80 Mbps (TCP), 100 Mbps (UDP)
- 2.4-GHz MRC support for extended range and 5-GHz diversity capable
- Fully calibrated: production calibration not required
- 4-bit SDIO host interface support
- Wi-Fi direct concurrent operation (multichannel, multirole)
Bluetooth and Bluetooth low energy ( WL1837MOD only)
- Bluetooth 5.1 secure connection compliant and CSA2 support (declaration ID: D052427 )
- Host controller interface (HCI) transport for Bluetooth over UART
- Dedicated audio processor support of SBC encoding + A2DP
- Dual-mode Bluetooth and Bluetooth low energy
- TI’s Bluetooth and Bluetooth low energy certified stack
Key benefits
- Reduces design overhead
- Differentiated use cases by configuring WiLink™ 8 simultaneously in two roles (STA and AP) to connect directly with other Wi-Fi devices on different RF channel (Wi-Fi networks)
- Best-in-class Wi-Fi with high-performance audio and video streaming reference applications with up to 1.4× the range versus one antenna
- Different provisioning methods for in-home devices connectivity to Wi-Fi in one step
- Lowest Wi-Fi power consumption in connected idle (< 800 µA)
- Configurable wake on WLAN filters to only wake up the system
- Wi-Fi and Bluetooth single antenna coexistence

仕様

パラメータ	価値	パラメータ	価値
Processor	External MPU	Type	Module, Transceiver
Protocols	Wi-Fi 2.4 GHz, Wi-Fi 5 GHz	Throughput (max) (MBits)	100
Security	Networking security (WPA3)	Features	2x2 MIMO, 802.11abgn, AP, Mesh over Wi-Fi based on 802.11s, STA, Wi-Fi direct mode
Certifications	CE, FCC, ISED, MIC	Operating temperature range (°C)	-40 to 85
Rating	Catalog

配送

	配送料	リードタイム
DHL	$20.00-$40.00 (0.50 KG)	2-5 日々
フェデックス	$20.00-$40.00 (0.50 KG)	2-5 日々
UPS	$20.00-$40.00 (0.50 KG)	2-5 日々
TNT	$20.00-$40.00 (0.50 KG)	2-5 日々
EMS	$20.00-$40.00 (0.50 KG)	2-5 日々
登録された航空便	$20.00-$40.00 (0.50 KG)	2-5 日々

処理時間：送料は地域や国によって異なります。

支払い

支払条件		ハンドフィー
	電信送金	銀行手数料 US$30.00 を請求します。
	ペイパル	4.0％のサービス料がかかります。
	クレジットカード	3.5％のサービス料がかかります。
	ウエスタンユニオン	charge US.00 banking fee.
	送金サービス	銀行手数料は 0.00 米ドルかかります。

保証

1.購入した電子部品には365日保証が含まれており、製品の品質を保証します。

2.受け取った商品の一部が完璧な品質ではない場合、当社は責任を持って返金または交換を手配します。ただし、商品は元の状態のままでなければなりません。

パッキング

ステップ1 :製品
ステップ2 :真空包装
ステップ3 :静電気防止袋
ステップ4 :個包装
ステップ5 :梱包箱
ステップ6 :バーコード配送タグ

すべての製品は静電気防止袋に梱包されます。 ESD 帯電防止保護を備えた状態で出荷されます。

社外の ESD 梱包ラベルには、部品番号、ブランド、数量などの当社の情報が使用されます。

私たちは出荷前にすべての商品を検査し、すべての製品が良好な状態であることを確認し、部品が新しいオリジナルでデータシートと一致していることを確認します。

すべての商品に問題がないことを確認した後、梱包後、安全に梱包し、グローバルエクスプレスで発送します。優れた耐穿刺性と耐引裂性を示し、シールの完全性も良好です。

パーツポイント

The WL1807MODGIMOCR chip is a highly integrated wireless communication module. It supports Wi-Fi, Bluetooth, and Bluetooth Low Energy (BLE) connectivity. It's commonly used in IoT devices, smart home applications, and industrial automation. With its compact design and versatile features, it provides reliable wireless connectivity for various applications.
Equivalent

The WL1807MODGIMOCR chip's equivalent products include the WL1801MODGIMOCR, WL1831MODGIMOCR, and WL1835MODGIMOCR. They are all part of the same WiLink™ 8 family from Texas Instruments, offering similar features and functionalities for wireless connectivity in IoT and embedded systems.
Features

WL1807MODGIMOCR is an integrated dual-band Wi-Fi and Bluetooth module that supports 2x2 MIMO technology and includes an additional on-chip processor for offloading some host CPU tasks. It also features support for Bluetooth Low Energy (BLE) v4.2 and Zigbee, as well as dual-mode wideband RF transceivers.
Pinout

The WL1807MODGIMOCR is a wireless module with 180 pins. It integrates Wi-Fi, Bluetooth, and FM functionalities, suitable for embedded systems requiring wireless connectivity. The pin functions include power, communication interfaces, and antenna connections.
Manufacturer

The WL1807MODGIMOCR is manufactured by Texas Instruments (TI), an American semiconductor company. TI specializes in designing and manufacturing semiconductors and integrated circuits for a wide range of applications, including analog and digital electronics, embedded systems, and wireless connectivity solutions like the WL1807MODGIMOCR.
Application Field

The WL1807MODGIMOCR is primarily used in Internet of Things (IoT) applications, including smart homes, industrial automation, healthcare monitoring, and wearable devices. It enables wireless connectivity, location tracking, and communication capabilities in compact and power-efficient devices.
Package

The WL1807MODGIMOCR chip comes in a BGA (Ball Grid Array) package type, with a form factor of module, and its size is approximately 6.5mm x 6.5mm.