このウェブサイトは Cookie を使用しています。このサイトを使用すると、Cookie の使用に同意したことになります。詳細については、こちらをご覧くださいプライバシーポリシー.

画像は参考用です。製品仕様を参照してください。

Renesas ZSC31050FAG1-R

Name: ZSC31050FAG1-R
Rating: 4.5 (10 reviews)

Sensor Interface Adv Diff Sensor Signal Conditioner

ブランド: Renesas Technology Corp

製造元部品 #: ZSC31050FAG1-R

データシート: ZSC31050FAG1-R Datasheet (PDF)

パッケージ/ケース: SSOP-16

製品の種類: Integrated Circuits (ICs)

RoHS ステータス:

在庫状況: 3925 個、新しいオリジナル

Warranty: 1 Year Ovaga Warranty - Find Out More

ボムに追加

簡単な見積もり

RFQを提出してください ZSC31050FAG1-R またはメールでご連絡ください: メール: [email protected], 12時間以内にご連絡させていただきます。

数量^*

メール^*

連絡先名^*

会社

述べる

ZSC31050FAG1-R 概要

The ZSC31050 is a CMOS integrated circuit for amplification and sensor-specific correction of bridge sensor signals. The device provides digital compensation of sensor offset, sensitivity, temperature drift and non-linearity by a 16-bit RISC microcontroller running a correction algorithm. The ZSC31050 accommodates virtually any resistive bridge sensor (e.g., piezo-resistive and steel-membrane-based pressure sensors). In addition, the device can interface to a separate temperature sensor. The bi-directional digital interfaces (I2C, SPI, ZACwire™) can be used for a simple PC-controlled calibration procedure, encompassing writing and programming a set of calibration coefficients into an on-chip EEPROM. The ZSC31050 has been designed for industrial, medical and consumer applications and is specifically suited for most pressure sensors. It can also be used with force, torque, acceleration, angle, position and revolution sensors.

特徴

Digital compensation of sensor offset, sensitivity, temperature drift and non-linearity
Accommodates nearly all bridge sensors via PGA and programmable ADC
Capable of conditioning bridge sensor signals ranging from 1 to 275mV/V
Sensor connections check and aging detection
Temperature compensation via internal diode, external diode or bridge sensor element
Output options: voltage (0 to 5V), current (4 to 20mA), PWM, I2C , SPI, ZACwire™ (one-wire interface), alarm
Adjustable ADC resolution (up to 15-bit) versus sampling rate (up to 3.9kHz)
Selectable bridge excitation: ratiometric voltage, constant voltage or constant current
Input channel for separate temperature sensor
Operation temperature range, depending on product version, up to -40°C to +150°C
AEC-Q100 qualification (temperature grade 0)
Supply voltage: +2.7V to +5.5V, with external JFET: 5 to 40 V
Available in SSOP16 or as die

仕様

パラメータ	価値	パラメータ	価値
Manufacturer:	IDT (Integrated Device Technology)	Product Category:	Sensor Interface
RoHS:	Y	Type:	Sensor Signal Conditioner
Interface Type:	I2C, SPI	Supply Voltage - Max:	5.5 V
Supply Voltage - Min:	2.7 V	Operating Supply Current:	2.5 mA
Minimum Operating Temperature:	- 40 C	Maximum Operating Temperature:	+ 125 C
Mounting Style:	SMD/SMT	Package / Case:	SSOP-16
Packaging:	Reel	Output Current:	4 mA, 10 mA
Output Type:	Analog, Digital	Series:	ZSC31050
Brand:	IDT	Number of Channels:	1 Channel
Development Kit:	ZSC31050KITV3P1	Operating Supply Voltage:	2.7 V to 5.5 V
Product Type:	Sensor Interface	Factory Pack Quantity:	2000
Subcategory:	Interface ICs	Unit Weight:	0.004586 oz
Tags	ZSC31050FAG, ZSC31050FA, ZSC31050F, ZSC3105, ZSC310, ZSC31, ZSC3, ZSC

配送

	配送料	リードタイム
DHL	$20.00-$40.00 (0.50 KG)	2-5 日々
フェデックス	$20.00-$40.00 (0.50 KG)	2-5 日々
UPS	$20.00-$40.00 (0.50 KG)	2-5 日々
TNT	$20.00-$40.00 (0.50 KG)	2-5 日々
EMS	$20.00-$40.00 (0.50 KG)	2-5 日々
登録された航空便	$20.00-$40.00 (0.50 KG)	2-5 日々

処理時間：送料は地域や国によって異なります。

支払い

支払条件		ハンドフィー
	電信送金	銀行手数料 US$30.00 を請求します。
	ペイパル	4.0％のサービス料がかかります。
	クレジットカード	3.5％のサービス料がかかります。
	ウエスタンユニオン	charge US.00 banking fee.
	送金サービス	銀行手数料は 0.00 米ドルかかります。

保証

1.購入した電子部品には365日保証が含まれており、製品の品質を保証します。

2.受け取った商品の一部が完璧な品質ではない場合、当社は責任を持って返金または交換を手配します。ただし、商品は元の状態のままでなければなりません。

パッキング

ステップ1 :製品
ステップ2 :真空包装
ステップ3 :静電気防止袋
ステップ4 :個包装
ステップ5 :梱包箱
ステップ6 :バーコード配送タグ

すべての製品は静電気防止袋に梱包されます。 ESD 帯電防止保護を備えた状態で出荷されます。

社外の ESD 梱包ラベルには、部品番号、ブランド、数量などの当社の情報が使用されます。

私たちは出荷前にすべての商品を検査し、すべての製品が良好な状態であることを確認し、部品が新しいオリジナルでデータシートと一致していることを確認します。

すべての商品に問題がないことを確認した後、梱包後、安全に梱包し、グローバルエクスプレスで発送します。優れた耐穿刺性と耐引裂性を示し、シールの完全性も良好です。

パーツポイント

The ZSC31050FAG1-R chip is an integrated circuit designed for high-precision digital compensation and calibration of sensors used in various applications such as pressure, temperature, and force measurement. This chip provides accurate measurement results by compensating for non-linearity, temperature-dependent effects, and other sensor-specific characteristics. It offers a simple interface to microcontrollers and operates at low power consumption for enhanced efficiency.
Equivalent

There isn't a direct equivalent product to the ZSC31050FAG1-R chip. However, some similar products that you may consider are the ZSC31150FAG1-R, ZSC3122EAG1-R, and ZSC3132EAG1-R chips, which are part of the same family.
Features

The ZSC31050FAG1-R is a compact, high-performance sensor that offers digital output. It is designed to measure pressure and temperature in a variety of applications, including automotive and industrial systems. The sensor has low power consumption, high accuracy, and a fast response time, making it suitable for demanding environments.
Pinout

The ZSC31050FAG1-R is a digital calibration amplifier designed for piezoresistive bridge sensors. It has 16 pins and operates as an analog frontend for measuring pressure, temperature, and force. Its functions include amplification, temperature compensation, and calibration.
Manufacturer

The manufacturer of the ZSC31050FAG1-R is Renesas Electronics Corporation. Renesas Electronics is a Japanese semiconductor manufacturer that provides advanced solutions for automotive, industrial, home electronics, and other sectors.
Application Field

The ZSC31050FAG1-R is a sensor used for measuring pressure and temperature in various applications, such as automotive systems, industrial equipment, HVAC, medical devices, and consumer electronics. It can provide accurate and reliable measurements, making it suitable for a wide range of monitoring and control applications.
Package

The ZSC31050FAG1-R chip is available in a 20-pin SSOP package type. It has a rectangular form with a dimension of approximately 6.4mm x 6.6mm.