画像は参考用です。製品仕様を参照してください。
注文金額が
$5000
TI UCC21520QDWRQ1
Automotive 4-A, 6-A, 5.7-kVRMS isolated dual-channel gate driver with dual input, disable, deadtime
ブランド: Texas Instruments
製造元部品 #: UCC21520QDWRQ1
データシート: UCC21520QDWRQ1 データシート (PDF)
パッケージ/ケース: 16-SOIC
RoHS ステータス:
在庫状況: 6,144 個、新しいオリジナル
製品の種類: Galvanically Isolated Gate Drivers
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
*すべての価格は米ドルです
| 数量 | 単価 | 外部価格 |
|---|---|---|
| 1 | $2.910 | $2.910 |
| 10 | $2.549 | $25.490 |
| 30 | $2.334 | $70.020 |
| 100 | $2.117 | $211.700 |
| 500 | $1.857 | $928.500 |
| 1000 | $1.813 | $1813.000 |
在庫あり: 6,144 PCS
UCC21520QDWRQ1 概要
The UCC21520-Q1 is an isolated dual-channel gate drivers with 4-A source and 6-A sink peak current. It is designed to drive power MOSFETs, IGBTs, and SiC MOSFETs up to 5-MHz with best-in-class propagation delay and pulse-width distortion.
The input side is isolated from the two output drivers by a 5.7-kVRMS reinforced isolation barrier, with a minimum of 100-V/ns common-mode transient immunity (CMTI). Internal functional isolation between the two secondary-side drivers allows a working voltage of up to 1500 VDC.
Every driver can be configured as two low-side drivers, two high-side drivers, or a half-bridge driver with programmable dead time (DT). A disable pin shuts down both outputs simultaneously, and allows normal operation when left open or grounded. As a fail-safe measure, primary-side logic failures force both outputs low.
Each device accepts VDD supply voltages up to 25 V. A wide input VCCI range from 3 V to 18 V makes the driver suitable for interfacing with both analog and digital controllers. All supply voltage pins have under voltage lock-out (UVLO) protection.
With all these advanced features, the UCC21520-Q1 enables high efficiency, high power density, and robustness.
特徴
- Qualified for automotive applications
- AEC-Q100 qualified with the following results
- Device temperature grade 1
- Device HBM ESD classification level H2
- Device CDM ESD classification level C6
- Functional safety quality-managed
- Documentation available to aid functional safety system design
- Operating temperature range –40 to +125°C
- Switching parameters:
- 19-ns typical propagation delay
- 10-ns minimum pulse width
- 5-ns maximum delay matching
- 6-ns maximum pulse-width distortion
- Common-mode transient immunity (CMTI) greater than 100 V/ns
- Surge immunity up to 12.8 kV
- Isolation barrier life >40 years
- 4-A peak source, 6-A peak sink output
- 3-V to 18-V input VCCI range to interface with both digital and analog controllers
- Up to 25-V VDD output drive supply
- 5-V and 8-V VDD UVLO options
- Programmable overlap and dead time
- Rejects input pulses and noise transients shorter than 5 ns
- Fast disable for power sequencing
- Safety-related certifications:
- 8000-VPK reinforced Isolation per DIN V VDE V 0884-11:2017-01
- 5.7-kVRMS isolation for 1 minute per UL 1577
- CSA certification per IEC 60950-1, IEC 62368-1, IEC 61010-1 and IEC 60601-1 end equipment standards
- CQC certification per GB4943.1-2011
仕様
| パラメータ | 価値 | パラメータ | 価値 |
|---|---|---|---|
| Manufacturer | Texas Instruments | Product Category | Galvanically Isolated Gate Drivers |
| RoHS | Details | Series | UCC21520-Q1 |
| Type | Half-Bridge | Mounting Style | SMD/SMT |
| Package / Case | SOIC-16 | Number of Drivers | 2 Driver |
| Number of Outputs | 2 Output | Output Current | 6 A |
| Supply Voltage - Min | 3 V | Supply Voltage - Max | 18 V |
| Rise Time | 6 ns | Fall Time | 7 ns |
| Minimum Operating Temperature | - 40 C | Maximum Operating Temperature | + 125 C |
| Technology | Si | Qualification | AEC-Q100 |
| Brand | Texas Instruments | Development Kit | UCC21520EVM-286 |
| Logic Type | CMOS, TTL | Moisture Sensitive | Yes |
| Operating Supply Current | 2.5 mA | Pd - Power Dissipation | 1.05 W |
| Product | Isolated Gate Drivers | Product Type | Galvanically Isolated Gate Drivers |
| Propagation Delay - Max | 30 ns | Shutdown | No Shutdown |
| Factory Pack Quantity | 2000 | Subcategory | PMIC - Power Management ICs |
| Unit Weight | 0.026293 oz | Number of channels | 2 |
| Isolation rating | Reinforced | Withstand isolation voltage (VISO) (Vrms) | 5700 |
| Working isolation voltage (VIOWM) (Vrms) | 2121 | Transient isolation voltage (VIOTM) (VPK) | 8000 |
| Power switch | IGBT, MOSFET, SiCFET | Peak output current (A) | 6 |
| Features | Disable, Programmable dead time | Output VCC/VDD (max) (V) | 25 |
| Output VCC/VDD (min) (V) | 6.5, 9.2 | Input VCC (min) (V) | 3 |
| Input VCC (max) (V) | 18 | TI functional safety category | Functional Safety Quality-Managed |
| Propagation delay time (µs) | 0.019 | Input threshold | CMOS, TTL |
| Operating temperature range (°C) | -40 to 125 | Rating | Automotive |
| Bus voltage (max) (V) | 2121 | Rise time (ns) | 6 |
| Fall time (ns) | 8 |
配送
| 配送タイプ | 配送料 | リードタイム | |
|---|---|---|---|
 |
DHL | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
 |
フェデックス | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
 |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
 |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
 |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
 |
登録された航空便 | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
処理時間：送料は地域や国によって異なります。
支払い
| 支払条件 | ハンドフィー | |
|---|---|---|
 |
電信送金 | 銀行手数料 US$30.00 を請求します。 |
 |
ペイパル | 4.0％のサービス料がかかります。 |
 |
クレジットカード | 3.5％のサービス料がかかります。 |
 |
ウエスタンユニオン | charge US.00 banking fee. |
 |
送金サービス | 銀行手数料は 0.00 米ドルかかります。 |
保証
1.購入した電子部品には365日保証が含まれており、製品の品質を保証します。
2.受け取った商品の一部が完璧な品質ではない場合、当社は責任を持って返金または交換を手配します。 ただし、商品は元の状態のままでなければなりません。
パッキング
-
![製品]( "製品")
ステップ1 :製品
-
![真空包装]( "真空包装")
ステップ2 :真空包装
-
![静電気防止袋]( "静電気防止袋")
ステップ3 :静電気防止袋
-
![個包装]( "個包装")
ステップ4 :個包装
-
![梱包箱]( "梱包箱")
ステップ5 :梱包箱
-
![バーコード配送タグ]( "バーコード配送タグ")
ステップ6 :バーコード配送タグ
すべての製品は静電気防止袋に梱包されます。 ESD 帯電防止保護を備えた状態で出荷されます。
社外の ESD 梱包ラベルには、部品番号、ブランド、数量などの当社の情報が使用されます。
私たちは出荷前にすべての商品を検査し、すべての製品が良好な状態であることを確認し、部品が新しいオリジナルでデータシートと一致していることを確認します。
すべての商品に問題がないことを確認した後、梱包後、安全に梱包し、グローバルエクスプレスで発送します。 優れた耐穿刺性と耐引裂性を示し、シールの完全性も良好です。
パーツポイント
-
The UCC21520QDWRQ1 is a high-speed, dual-channel isolated gate driver chip designed for use in automotive and industrial applications. It features advanced protection and diagnostic features, as well as high noise immunity and robust ESD protection levels. This chip is ideal for driving power switch technologies such as MOSFETs, IGBTs, and SiC FETs.
-
Equivalent
Equivalent products of UCC21520QDWRQ1 chip include UCC21510QDWRQ1, UCC21530QDWRQ1, UCC21540QDWRQ1, and UCC21550QDWRQ1. These chips are part of the UCC215xxQDWRQ1 series of reinforced isolated dual-channel gate drivers from Texas Instruments, offering similar features and performance capabilities. -
Features
- Dual-channel digital isolator - With an integrated DC-DC converter - Provides reinforced isolation of up to 3kV - Offers a 3.3 V or 5 V regulated power output - 10 Mbps data rate and 100MHz operating frequency - Suitable for applications in industrial control systems, grid infrastructure, and motor control applications. -
Pinout
The UCC21520QDWRQ1 is a 16-pin dual channel gate driver. It provides high-side and low-side drive functions for IGBTs and MOSFETs in automotive and industrial applications. It offers protection features such as undervoltage lockout and overcurrent protection. -
Manufacturer
The manufacturer of UCC21520QDWRQ1 is Texas Instruments. It is an American multinational company that designs and manufactures semiconductors and integrated circuits for a range of applications, including industrial, automotive, telecommunications, and consumer electronics. -
Application Field
The UCC21520QDWRQ1 is a reinforced isolated dual-channel gate driver designed for driving power semiconductor switches in applications such as motor drives, solar inverters, and power supplies. It provides enhanced protection features and high CMTI to improve system reliability and efficiency. -
Package
The UCC21520QDWRQ1 chip comes in a surface-mount, 8-pin SOIC form. The package size is 3 mm x 5 mm.
私たちは高品質の製品、思いやりのあるサービス、販売後の保証を提供します
-
![製品]( "製品")
豊富な商品を取り揃えておりますので、お客様の様々なニーズにお応え致します。
-
![quantity]( "quantity")
最小注文数量は1個からとなります。
-
![shipping]( "shipping")
最低国際配送料は0.00ドルから
-
![保証]( "保証")
全商品365日品質保証
