注文金額が
$5000TMC246A-PA
MOTOR DRIVER, FULL BRIDGE, 1.5A QFP-44
![ISO14001](/img/about/iso14001.png)
![ISO9001](/img/about/iso9001.png)
![DUNS](/img/about/duns.png)
ブランド: Analog Devices Inc.
製造元部品 #: TMC246A-PA
データシート: TMC246A-PA データシート (PDF)
パッケージ/ケース: 44-LQFP
製品の種類: Motor Drivers, Controllers
TMC246A-PA 概要
One of the standout features of the TMC246A-PA is its adjustable step resolution, allowing users to fine-tune their motor control for optimal performance. Whether you need full step, half step, or microstep resolution, this chip has you covered. Additionally, the built-in stall detection, overtemperature protection, and short circuit detection provide added peace of mind, ensuring safe operation in all conditions
![TMC246A-PA TMC246A-PA](/files/uploads/product/b/e6959ae681f746baa627d22063b53d67.webp)
特徴
Multiple input formats
24 bit RGB
20 bit CCIR601
10 bit CCIR656
10 bit Digital Composite
Synchronization modes
Master
Slave
Genlock
CCIR656
Subcarrier modes
Free-run
Subcarrier reset
Genlock
DRS-lock
Ancillary Data Control (ANC)
Pixel rates from 10 MHz to 15 MHz
Programmable horizontal timing
Programmable vertical blanking interval (VBI)
Line-by-line pedestal enable
Programmable pedestal height from -20 IRE to 20 IRE
Programmable burst amplitude and phase
Controlled edge rates for
Sync
Burst
Active video
Programmable color space matrix
8:8:8 video reconstruction
Four 10 bit D/As with independent trim
Individual power down modes for each D/A
Multiple output formats
RGB
Y PB PR
Betacam
S-video
Composite
Digital composite output
Pin-driven and data-driven, window keying
Closed Caption waveform generation (13.5 MHz only)
Sin(X)/X compensation filter
5 bit VBI line counter
3 bit field counter
Internal test pattern generation
100% Color Bars
75% Color Bars
Modulated Ramp
![TMC246A-PA TMC246A-PA](/files/uploads/product/b/cfdb1538e56d4beeb8f88bccf9e630fa.webp)
応用
Broadcast Television
Nonlinear Video Processing
仕様
パラメータ | 価値 | パラメータ | 価値 |
---|---|---|---|
Manufacturer: | Analog Devices Inc. | Product Category: | Motor / Motion / Ignition Controllers & Drivers |
Brand: | ADI Trinamic | Product Type: | Motor / Motion / Ignition Controllers & Drivers |
Subcategory: | PMIC - Power Management ICs |
配送
配送タイプ | 配送料 | リードタイム | |
---|---|---|---|
![]() |
DHL | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
![]() |
フェデックス | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
![]() |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
![]() |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
![]() |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
![]() |
登録された航空便 | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
処理時間:送料は地域や国によって異なります。
支払い
支払条件 | ハンドフィー | |
---|---|---|
![]() |
電信送金 | 銀行手数料 US$30.00 を請求します。 |
![]() |
ペイパル | 4.0%のサービス料がかかります。 |
![]() |
クレジットカード | 3.5%のサービス料がかかります。 |
![]() |
ウエスタンユニオン | charge US.00 banking fee. |
![]() |
送金サービス | 銀行手数料は 0.00 米ドルかかります。 |
保証
1.購入した電子部品には365日保証が含まれており、製品の品質を保証します。
2.受け取った商品の一部が完璧な品質ではない場合、当社は責任を持って返金または交換を手配します。 ただし、商品は元の状態のままでなければなりません。
パッキング
-
ステップ1 :製品
-
ステップ2 :真空包装
-
ステップ3 :静電気防止袋
-
ステップ4 :個包装
-
ステップ5 :梱包箱
-
ステップ6 :バーコード配送タグ
すべての製品は静電気防止袋に梱包されます。 ESD 帯電防止保護を備えた状態で出荷されます。
社外の ESD 梱包ラベルには、部品番号、ブランド、数量などの当社の情報が使用されます。
私たちは出荷前にすべての商品を検査し、すべての製品が良好な状態であることを確認し、部品が新しいオリジナルでデータシートと一致していることを確認します。
すべての商品に問題がないことを確認した後、梱包後、安全に梱包し、グローバルエクスプレスで発送します。 優れた耐穿刺性と耐引裂性を示し、シールの完全性も良好です。
パーツポイント
-
The TMC246A-PA chip is an integrated stepper motor controller and driver. It supports up to two stepper motors and offers advanced features such as stall detection, stealthChop and spreadCycle drive modes, and silent control. With its high resolution, low power consumption, and integrated protection mechanisms, the TMC246A-PA chip is ideal for various applications requiring precise and efficient motor control.
-
Features
The TMC246A-PA is a motor driver module with integrated MOSFETs designed for DC motors. It features a wide voltage supply range of 4.5V to 20V, a maximum continuous motor current of 1.6A, and overcurrent and overtemperature protection. It also provides high efficiency, low standby current, and easy integration into a variety of applications. -
Pinout
The TMC246A-PA has a pin count of 44. Its functions include motor current setting, stall detection, over-temperature protection, and external reference voltage input, among others. -
Manufacturer
The manufacturer of the TMC246A-PA is Trinamic Motion Control GmbH. Trinamic is a semiconductor company specializing in motor and motion control technologies. They develop and produce integrated circuits, modules, and systems that enable precise motion control in a range of applications like robotics, 3D printing, and automation. -
Application Field
The TMC246A-PA is primarily used in applications that require precise and noiseless control of stepper motors, such as robotics, automation systems, 3D printers, and CNC machines. It is ideal for applications where smooth and accurate movement, low power consumption, and high efficiency are key requirements. -
Package
The TMC246A-PA chip is available in a QFN package type, with a square-shaped form and a size of 6mm x 6mm.
私たちは高品質の製品、思いやりのあるサービス、販売後の保証を提供します
-
豊富な商品を取り揃えておりますので、お客様の様々なニーズにお応え致します。
-
最小注文数量は1個からとなります。
-
最低国際配送料は0.00ドルから
-
全商品365日品質保証