注文金額が
$5000
TI TLE2082AIP
Operational Amplifiers - Op Amps Dual High Speed
![ISO14001](/img/about/iso14001.png)
![ISO9001](/img/about/iso9001.png)
![DUNS](/img/about/duns.png)
ブランド: Texas Instruments
製造元部品 #: TLE2082AIP
データシート: TLE2082AIP データシート (PDF)
パッケージ/ケース: 8-PDIP
RoHS ステータス:
在庫状況: 8,337 個、新しいオリジナル
製品の種類: Instrumentation, OP Amps, Buffer Amps
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
*すべての価格は米ドルです
数量 | 単価 | 外部価格 |
---|---|---|
1 | $11.628 | $11.628 |
200 | $4.500 | $900.000 |
500 | $4.341 | $2170.500 |
1000 | $4.264 | $4264.000 |
在庫あり: 8,337 PCS
TLE2082AIP 概要
The TLE208x series of JFET-input operational amplifiers more than double the bandwidth and triple the slew rate of the TL07x and TL08x families of BiFET operational amplifiers. The TLE208x also have wider supply-voltage rails, increasing the dynamic-signal range for BiFET circuits to ±19 V. On-chip zener trimming of offset voltage yields precision grades for greater accuracy in dc-coupled applications. The TLE208x are pin-compatible with lower performance BiFET operational amplifiers for ease in improving performance in existing designs.
BiFET operational amplifiers offer the inherently higher input impedance of the JFET-input transistors, without sacrificing the output drive associated with bipolar amplifiers. This makes these amplifiers better suited for interfacing with high-impedance sensors or very low level ac signals. They also feature inherently better ac response than bipolar or CMOS devices having comparable power consumption.
Because BiFET operational amplifiers are designed for use with dual power supplies, care must be taken to observe common-mode input-voltage limits and output voltage swing when operating from a single supply. DC biasing of the input signal is required and loads should be terminated to a virtual ground node at mid-supply. Texas Instruments TLE2426 integrated virtual ground generator is useful when operating BiFET amplifiers from single supplies.
The TLE208x are fully specified at ±15 V and ±5 V. For operation in low-voltage and/or single-supply systems, Texas Instruments LinCMOS families of operational amplifiers (TLC- and TLV-prefix) are recommended. When moving from BiFET to CMOS amplifiers, particular attention should be paid to slew rate and bandwidth requirements and output loading.
For BiFET circuits requiring low noise and/or tighter dc precision, the TLE207x offer the same ac response as the TLE208x with more stringent dc and noise specifications.
特徴
- Direct Upgrades to TL05x, TL07x, and TL08x BiFET Operational Amplifiers
- Greater Than 2× Bandwidth (10 MHz) and 3× Slew Rate (45 V/us) Than TL08x
- On-Chip Offset Voltage Trimming for Improved DC Performance
- Wider Supply Rails Increase Dynamic Signal Range to ±19 V
LinCMOS is a trademark of Texas Instruments.
仕様
パラメータ | 価値 | パラメータ | 価値 |
---|---|---|---|
Manufacturer | Texas Instruments | Product Category | Operational Amplifiers - Op Amps |
RoHS | Details | Mounting Style | Through Hole |
Package / Case | PDIP-8 | Number of Channels | 2 Channel |
Supply Voltage - Max | 38 V | GBP - Gain Bandwidth Product | 10 MHz |
Output Current per Channel | 45 mA | SR - Slew Rate | 40 V/us |
Vos - Input Offset Voltage | 4 mV | Supply Voltage - Min | 4.5 V |
Minimum Operating Temperature | - 40 C | Maximum Operating Temperature | + 85 C |
Ib - Input Bias Current | 175 pA | Operating Supply Current | 2.9 mA |
Shutdown | No Shutdown | CMRR - Common Mode Rejection Ratio | 89 dB |
en - Input Voltage Noise Density | 12 nV/sqrt Hz | Series | TLE2082A |
Amplifier Type | Wideband Amplifier | Brand | Texas Instruments |
Dual Supply Voltage | +/- 3 V, +/- 5 V, +/- 9 V | Height | 4.57 mm |
In - Input Noise Current Density | 0.0028 pA/sqrt Hz | Input Type | Rail-to-Rail |
Length | 9.81 mm | Maximum Dual Supply Voltage | +/- 19 V |
Minimum Dual Supply Voltage | +/- 2.25 V | Operating Supply Voltage | 4.5 V to 38 V, +/- 2.25 V to +/- 19 V |
Pd - Power Dissipation | 1 W | Product | Operational Amplifiers |
Product Type | Op Amps - Operational Amplifiers | Factory Pack Quantity | 50 |
Subcategory | Amplifier ICs | Supply Type | Single, Dual |
Technology | BiFET | Vcm - Common Mode Voltage | Negative Rail + 4 V to Positive Rail |
Voltage Gain dB | 106 dB | Width | 6.35 mm |
Unit Weight | 0.015535 oz |
配送
配送タイプ | 配送料 | リードタイム | |
---|---|---|---|
![]() |
DHL | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
![]() |
フェデックス | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
![]() |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
![]() |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
![]() |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
![]() |
登録された航空便 | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
処理時間:送料は地域や国によって異なります。
支払い
支払条件 | ハンドフィー | |
---|---|---|
![]() |
電信送金 | 銀行手数料 US$30.00 を請求します。 |
![]() |
ペイパル | 4.0%のサービス料がかかります。 |
![]() |
クレジットカード | 3.5%のサービス料がかかります。 |
![]() |
ウエスタンユニオン | charge US.00 banking fee. |
![]() |
送金サービス | 銀行手数料は 0.00 米ドルかかります。 |
保証
1.購入した電子部品には365日保証が含まれており、製品の品質を保証します。
2.受け取った商品の一部が完璧な品質ではない場合、当社は責任を持って返金または交換を手配します。 ただし、商品は元の状態のままでなければなりません。
パッキング
-
ステップ1 :製品
-
ステップ2 :真空包装
-
ステップ3 :静電気防止袋
-
ステップ4 :個包装
-
ステップ5 :梱包箱
-
ステップ6 :バーコード配送タグ
すべての製品は静電気防止袋に梱包されます。 ESD 帯電防止保護を備えた状態で出荷されます。
社外の ESD 梱包ラベルには、部品番号、ブランド、数量などの当社の情報が使用されます。
私たちは出荷前にすべての商品を検査し、すべての製品が良好な状態であることを確認し、部品が新しいオリジナルでデータシートと一致していることを確認します。
すべての商品に問題がないことを確認した後、梱包後、安全に梱包し、グローバルエクスプレスで発送します。 優れた耐穿刺性と耐引裂性を示し、シールの完全性も良好です。
私たちは高品質の製品、思いやりのあるサービス、販売後の保証を提供します
-
豊富な商品を取り揃えておりますので、お客様の様々なニーズにお応え致します。
-
最小注文数量は1個からとなります。
-
最低国際配送料は0.00ドルから
-
全商品365日品質保証