ST TL072CN
These devices amplify the difference in voltage between two input terminals
ブランド: Stmicroelectronics
製造元部品 #: TL072CN
データシート: TL072CN Datasheet (PDF)
パッケージ/ケース: PDIP-8
RoHS ステータス:
在庫状況: 2149 個、新しいオリジナル
製品の種類: 増幅器IC
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
*すべての価格は米ドルです
数量 | 単価 | 外部価格 |
---|---|---|
5 | $0.225 | $1.125 |
50 | $0.183 | $9.150 |
150 | $0.164 | $24.600 |
500 | $0.141 | $70.500 |
2500 | $0.132 | $330.000 |
5000 | $0.125 | $625.000 |
In Stock:2149 PCS
TL072CN 概要
The TL072CN is a widely used operational amplifier (op-amp) integrated circuit.
特徴
Dual Operational Amplifier: The TL072CN contains two independent operational amplifiers in a single package.
Low Noise: It is known for having low noise characteristics, making it suitable for applications where signal fidelity is important.
Low Input Bias and Offset Current: These parameters contribute to the precision of the op-amp in terms of input characteristics.
Wide Bandwidth: The TL072CN has a relatively wide bandwidth, making it suitable for various audio and general-purpose applications.
Low Input Offset Voltage: The low input offset voltage is essential for minimizing errors in voltage amplification applications.
High Input Impedance: The op-amp has a high input impedance, which makes it compatible with a variety of input sources.
Low Total Harmonic Distortion (THD): It exhibits low distortion, making it suitable for audio applications where signal quality is crucial.
Wide Supply Voltage Range: It can operate with a wide range of supply voltages.
Dual JFET Input: The op-amp has dual JFET inputs, contributing to its low input bias current and offset voltage.
Common-Mode Input Voltage Range Includes Ground: This feature enhances the versatility of the op-amp in single-supply applications.
No Frequency Compensation Required: The TL072CN is designed for stable operation without the need for external frequency compensation.
応用
Audio Preamplifiers: Due to its low noise and distortion characteristics, it's commonly used in audio preamplifiers and other audio processing circuits.
Active Filters: The TL072CN is suitable for active filter circuits due to its wide bandwidth and low distortion.
Instrumentation Amplifiers: It can be used in instrumentation amplifiers where precision and low noise are critical.
Voltage Followers: The op-amp can be configured as a voltage follower to isolate input and output impedances.
Signal Conditioning Circuits: It is employed in various signal conditioning circuits where accurate signal processing is required.
Low-Frequency Oscillators: The TL072CN can be used in low-frequency oscillator circuits.
Precision Comparators: In applications where precision voltage comparisons are needed.
配送
配送タイプ | 配送料 | リードタイム | |
---|---|---|---|
DHL | $20.00-$40.00 (0.50 KG) | 2-5 日々 | |
フェデックス | $20.00-$40.00 (0.50 KG) | 2-5 日々 | |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 日々 | |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 日々 | |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 日々 | |
登録された航空便 | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
処理時間:送料は地域や国によって異なります。
支払い
支払条件 | ハンドフィー | |
---|---|---|
電信送金 | 銀行手数料 US$30.00 を請求します。 | |
ペイパル | 4.0%のサービス料がかかります。 | |
クレジットカード | 3.5%のサービス料がかかります。 | |
ウエスタンユニオン | charge US.00 banking fee. | |
送金サービス | 銀行手数料は 0.00 米ドルかかります。 |
保証
1.購入した電子部品には365日保証が含まれており、製品の品質を保証します。
2.受け取った商品の一部が完璧な品質ではない場合、当社は責任を持って返金または交換を手配します。 ただし、商品は元の状態のままでなければなりません。
パッキング
-
ステップ1 :製品
-
ステップ2 :真空包装
-
ステップ3 :静電気防止袋
-
ステップ4 :個包装
-
ステップ5 :梱包箱
-
ステップ6 :バーコード配送タグ
すべての製品は静電気防止袋に梱包されます。 ESD 帯電防止保護を備えた状態で出荷されます。
社外の ESD 梱包ラベルには、部品番号、ブランド、数量などの当社の情報が使用されます。
私たちは出荷前にすべての商品を検査し、すべての製品が良好な状態であることを確認し、部品が新しいオリジナルでデータシートと一致していることを確認します。
すべての商品に問題がないことを確認した後、梱包後、安全に梱包し、グローバルエクスプレスで発送します。 優れた耐穿刺性と耐引裂性を示し、シールの完全性も良好です。
同等部品
のために TL072CN コンポーネントの場合は、これらの交換部品および代替部品を検討してください:
部品番号
ブランド
パッケージ
説明
部品番号 : NE5532
ブランド :
パッケージ :
説明 :
部品番号 : LF353
ブランド :
パッケージ :
説明 :
部品番号 : LM358
ブランド :
パッケージ :
説明 :
部品番号 : LM833
ブランド :
パッケージ :
説明 :
部品番号 : OP275
ブランド :
パッケージ : SOP8
説明 : Dual Bipolar / JFET, Audio Operational Amplifier
部品番号 : OPA2134
ブランド :
パッケージ :
説明 :
部品番号 : OPA2604
ブランド :
パッケージ :
説明 :
パーツポイント
-
The TL072CN is a popular dual operational amplifier chip. it is designed for low noise and high-speed applications in a wide range of electronic devices. the chip offers a high input impedance and low input offset voltage, making it suitable for audio amplification and signal conditioning circuits. the TL072CN is commonly used in audio mixers, musical instruments, and professional audio equipment.
-
Equivalent
Some equivalent products of the TL072CN chip include the njm072, rc4558, and ne5532p. -
Features
The TL072CN is an operational amplifier with high voltage gain and low noise. it has a wide bandwidth and a high slew rate, making it suitable for applications requiring high precision and fast response. it has two operational amplifiers in a single package, and it can operate with a wide range of power supply voltages. -
Pinout
The TL072CN is a dual operational amplifier with a pin count of 8. pin 1 is the offset null terminal for channel 1, pin 2 is the inverting input of channel 1, pin 3 is the non-inverting input of channel 1, pin 4 is the negative supply voltage, pin 5 is the offset null terminal for channel 2, pin 6 is the inverting input of channel 2, pin 7 is the non-inverting input of channel 2, and pin 8 is the positive supply voltage. -
Manufacturer
The TL072CN is manufactured by texas instruments, a multinational semiconductor company based in the united states. texas instruments is known for producing a wide range of integrated circuits and semiconductors used in various industries, including consumer electronics, telecommunications, and automotive applications. -
Application Field
The TL072CN is typically used in audio applications, such as amplifiers, mixers, equalizers, and audio effect units. it is also employed in instrumentation and control systems, signal conditioning, and low-frequency filters. -
Package
The TL072CN chip has a dip-8 package type, meaning it has 8 leads in a dual in-line package. the form is a through-hole, meaning the leads go through holes in the circuit board for soldering. the chip's size in millimeters is typically around 9.35 x 6.35 x 3.3 (length x width x height).
データシート PDF
私たちは高品質の製品、思いやりのあるサービス、販売後の保証を提供します
-
豊富な商品を取り揃えておりますので、お客様の様々なニーズにお応え致します。
-
最小注文数量は1個からとなります。
-
最低国際配送料は0.00ドルから
-
全商品365日品質保証