TCA9546APWR
The TCA9546APWR is a multiplexer IC that allows for switching between multiple I2C devices, with the added convenience of a reset function."
ブランド: Texas Instruments
製造元部品 #: TCA9546APWR
データシート: TCA9546APWR データシート (PDF)
パッケージ/ケース: TSSOP (PW)-16
TCA9546APWR 概要
The TCA9546A is a quad bidirectional translating switch controlled via the I2C bus. The SCL/SDA upstream pair fans out to four downstream pairs, or channels. Any individual SCn/SDn channel or combination of channels can be selected, determined by the contents of the programmable control register.
An active-low reset (RESET) input allows the TCA9546A to recover from a situation in which one of the downstream I2C buses is stuck in a low state. Pulling RESET low resets the I2C state machine and causes all the channels to be deselected, as does the internal power-on reset function.
The pass gates of the switches are constructed such that the VCC pin can be used to limit the maximum high voltage, which will be passed by the TCA9546A. This allows the use of different bus voltages on each pair, so that 1.8-V, 2.5-V, or 3.3-V parts can communicate with 5-V parts without any additional protection. External pull-up resistors pull the bus up to the desired voltage level for each channel. All I/O pins are 5.5-V tolerant.
特徴
- 1-of-4 Bidirectional translating switches
- I2C Bus and SMBus compatible
- Active-low reset input
- Three address pins, allowing up to eight TCA9546A devices on the I2C bus
- Channel selection via I2C Bus, in any combination
- Power-up with all switch channels deselected
- Low RON switches
- Allows voltage-level translation between
1.8-V, 2.5-V, 3.3-V, and 5-V buses - No glitch on power-up
- Supports hot insertion
- Low standby current
- Operating power-supply voltage range of 1.65 V to 5.5 V
- 5.5 V Tolerant inputs
- 0 to 400-kHz Clock frequency
- Latch-up performance exceeds 100 mA Per JESD 78
- ESD Protection exceeds JESD 22
- 4000-V Human-body model (A114-A)
- 1500-V Charged-device model (C101)
応用
仕様
パラメータ | 価値 | パラメータ | 価値 |
---|---|---|---|
Addresses | 8 | Supply voltage (max) (V) | 5.5 |
Supply voltage (min) (V) | 1.65 | Features | Reset pin |
Rating | Catalog | Frequency (max) (MHz) | 0.4 |
Operating temperature range (°C) | -40 to 85 |
配送
配送タイプ | 配送料 | リードタイム | |
---|---|---|---|
DHL | $20.00-$40.00 (0.50 KG) | 2-5 日々 | |
フェデックス | $20.00-$40.00 (0.50 KG) | 2-5 日々 | |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 日々 | |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 日々 | |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 日々 | |
登録された航空便 | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
処理時間:送料は地域や国によって異なります。
支払い
支払条件 | ハンドフィー | |
---|---|---|
電信送金 | 銀行手数料 US$30.00 を請求します。 | |
ペイパル | 4.0%のサービス料がかかります。 | |
クレジットカード | 3.5%のサービス料がかかります。 | |
ウエスタンユニオン | charge US.00 banking fee. | |
送金サービス | 銀行手数料は 0.00 米ドルかかります。 |
保証
1.購入した電子部品には365日保証が含まれており、製品の品質を保証します。
2.受け取った商品の一部が完璧な品質ではない場合、当社は責任を持って返金または交換を手配します。 ただし、商品は元の状態のままでなければなりません。
パッキング
-
ステップ1 :製品
-
ステップ2 :真空包装
-
ステップ3 :静電気防止袋
-
ステップ4 :個包装
-
ステップ5 :梱包箱
-
ステップ6 :バーコード配送タグ
すべての製品は静電気防止袋に梱包されます。 ESD 帯電防止保護を備えた状態で出荷されます。
社外の ESD 梱包ラベルには、部品番号、ブランド、数量などの当社の情報が使用されます。
私たちは出荷前にすべての商品を検査し、すべての製品が良好な状態であることを確認し、部品が新しいオリジナルでデータシートと一致していることを確認します。
すべての商品に問題がないことを確認した後、梱包後、安全に梱包し、グローバルエクスプレスで発送します。 優れた耐穿刺性と耐引裂性を示し、シールの完全性も良好です。
私たちは高品質の製品、思いやりのあるサービス、販売後の保証を提供します
-
豊富な商品を取り揃えておりますので、お客様の様々なニーズにお応え致します。
-
最小注文数量は1個からとなります。
-
最低国際配送料は0.00ドルから
-
全商品365日品質保証