画像は参考用です。製品仕様を参照してください。
注文金額が
$5000
ST STTS751-1DP3F
Temperature Sensor Digital, Local -40°C ~ 125°C 11 b 6-UDFN (2x2)
ブランド: STMicroelectronics, Inc
製造元部品 #: STTS751-1DP3F
データシート: STTS751-1DP3F Datasheet (PDF)
パッケージ/ケース: UDFN-6
RoHS ステータス:
在庫状況: 2,179 個、新しいオリジナル
製品の種類: 温度センサ
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
*すべての価格は米ドルです
| 数量 | 単価 | 外部価格 |
|---|---|---|
| 1 | $0.932 | $0.932 |
| 10 | $0.780 | $7.800 |
| 30 | $0.702 | $21.060 |
| 100 | $0.627 | $62.700 |
| 500 | $0.556 | $278.000 |
| 1000 | $0.533 | $533.000 |
在庫あり: 2,179 PCS
STTS751-1DP3F 概要
The STTS751 is a digital temperature sensor which communicates over a 2-wire SMBus 2.0 compatible bus. The temperature is measured with a user-configurable resolution between 9 and 12 bits. At 9 bits, the smallest step size is 0.5 °C, and at 12 bits, it is 0.0625 °C. At the default resolution (10 bits, 0.25 °C/LSB), the conversion time is nominally 21 milliseconds.The open-drainEVENToutput is used to indicate an alarm condition in which the measured temperature has exceeded the user-programmed high limit or fallen below the low limit. When theEVENTpin is asserted, the host can respond using the SMBus Alert Response Address (ARA) protocol to which the STTS751 will respond by sending its slave address.The STTS751 is a 6-pin device that supports user-configurable slave addresses. Via the pull-up resistor on the Addr/Thermpin, one of four different slave addresses can be specified. Two order numbers (STTS751-0 and STTS751-1) provide two different sets of slave addresses bringing the total available to eight. Thus, up to eight devices can share the same 2-wire SMBus without ambiguity, thereby allowing monitoring of multiple temperature zones in an application.The two-wire interface can support transfer rates up to 400 kHz.Temperature probe kit based on STTS751.Motion MEMS and environmental sensor expansion b.
特徴
- Operating voltage 2.25 V to 3.6 V
- Operating temperature –40 °C to +125 °C
- Programmable
- 10 different conversion rates 0.0625 to 32 conversions/sec. 1 conversion/sec. - default
- 4 different resolutions 9-bit (0.5 °C/LSB) to12-bit (0.0625 °C/LSB) 10-bit (0.25 °C/LSB) - default
- Low supply current
- 50 μA (typ) for 8 conversions/sec.
- 20 μA (typ) for 1 conversion/sec.
- 3 μA (typ) standby
- Accuracy
- ±0.5 °C (typ) 0 °C to +85 °C
- ±0.5 °C (typ) –40 °C to +125 °C
- One-shot mode for power saving
- Fast conversion time 21 ms (typ) 10-bit
- Pull-up resistor value allows single pin to select one of four slave addresses
- Supports 400 kHz serial clock
- SMBus 2.0 compatible
- SMBus ALERT (ARA) support
- SMBus timeout
- RoHS/green
仕様
| パラメータ | 価値 | パラメータ | 価値 |
|---|---|---|---|
| Manufacturer: | STMicroelectronics | Product Category: | Board Mount Temperature Sensors |
| RoHS: | Y | Output Type: | Digital |
| Configuration: | Local | Accuracy: | +/- 2 C |
| Supply Voltage - Min: | 2 V | Supply Voltage - Max: | 3.6 V |
| Interface Type: | 2-Wire, I2C, SMBus | Resolution: | 12 bit |
| Minimum Operating Temperature: | - 40 C | Maximum Operating Temperature: | + 125 C |
| Shutdown: | No Shutdown | Temperature Threshold: | Programmable |
| Mounting Style: | SMD/SMT | Package / Case: | UDFN-6 |
| Product: | Sensor with Alert | Packaging: | Reel |
| Output Current: | 20 mA | Series: | STTS751 |
| Brand: | STMicroelectronics | Operating Supply Current: | 50 uA |
| Product Type: | Temperature Sensors | Factory Pack Quantity: | 3000 |
| Subcategory: | Sensors | Unit Weight: | 0.000186 oz |
| Tags | STTS751-1, STTS751, STTS7, STTS, STT | feature-packaging | Tape and Reel |
| feature-pin-count | 6 | feature-supplier-package | UDFN |
| feature-standard-package-name1 | DFN | feature-cecc-qualified | No |
| feature-esd-protection | feature-military | No | |
| feature-aec-qualified | No | feature-aec-qualified-number | |
| feature-auto-motive | No | feature-p-pap | No |
| feature-eccn-code | EAR99 | feature-svhc | No |
| feature-svhc-exceeds-threshold | No |
配送
| 配送タイプ | 配送料 | リードタイム | |
|---|---|---|---|
 |
DHL | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
 |
フェデックス | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
 |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
 |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
 |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
 |
登録された航空便 | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
処理時間：送料は地域や国によって異なります。
支払い
| 支払条件 | ハンドフィー | |
|---|---|---|
 |
電信送金 | 銀行手数料 US$30.00 を請求します。 |
 |
ペイパル | 4.0％のサービス料がかかります。 |
 |
クレジットカード | 3.5％のサービス料がかかります。 |
 |
ウエスタンユニオン | charge US.00 banking fee. |
 |
送金サービス | 銀行手数料は 0.00 米ドルかかります。 |
保証
1.購入した電子部品には365日保証が含まれており、製品の品質を保証します。
2.受け取った商品の一部が完璧な品質ではない場合、当社は責任を持って返金または交換を手配します。 ただし、商品は元の状態のままでなければなりません。
パッキング
-
![製品]( "製品")
ステップ1 :製品
-
![真空包装]( "真空包装")
ステップ2 :真空包装
-
![静電気防止袋]( "静電気防止袋")
ステップ3 :静電気防止袋
-
![個包装]( "個包装")
ステップ4 :個包装
-
![梱包箱]( "梱包箱")
ステップ5 :梱包箱
-
![バーコード配送タグ]( "バーコード配送タグ")
ステップ6 :バーコード配送タグ
すべての製品は静電気防止袋に梱包されます。 ESD 帯電防止保護を備えた状態で出荷されます。
社外の ESD 梱包ラベルには、部品番号、ブランド、数量などの当社の情報が使用されます。
私たちは出荷前にすべての商品を検査し、すべての製品が良好な状態であることを確認し、部品が新しいオリジナルでデータシートと一致していることを確認します。
すべての商品に問題がないことを確認した後、梱包後、安全に梱包し、グローバルエクスプレスで発送します。 優れた耐穿刺性と耐引裂性を示し、シールの完全性も良好です。
パーツポイント
-
The STTS751-1DP3F is a digital temperature sensor IC from STMicroelectronics, operating from -55°C to +125°C with an accuracy of ±1°C. It features a digital output with programmable resolution and interrupt functionality, making it ideal for applications requiring precise temperature monitoring.
-
Equivalent
The equivalent products of the STTS751-1DP3F chip are the STTS751-1TDP3F and STTS751-1TP3F. These devices are also high-precision digital temperature sensors from STMicroelectronics with the same features and specifications as the STTS751-1DP3F chip. -
Features
STTS751-1DP3F is a digital temperature sensor with a high accuracy of ±0.5°C over the temperature range of -25°C to +100°C. It operates from a single power supply of 2.5V to 5.5V and has a low power consumption of 250µA. It also features a 2-wire interface for communication with an external microcontroller. -
Pinout
The STTS751-1DP3F is a digital temperature sensor with a 6-pin DFN package. It features an accuracy of ±0.5°C and a temperature range of -40°C to +125°C. The pin functions are: pin 1 - VDD, pin 2 - GND, pin 3 - ALERT, pin 4 - SDA, pin 5 - SCL, pin 6 - ADDR. -
Manufacturer
STTS751-1DP3F is manufactured by STMicroelectronics, a multinational semiconductor manufacturer specializing in creating state-of-the-art products for electronics and IoT applications. STMicroelectronics is a leading supplier of sensors, microcontrollers, power management solutions, and more, catering to a wide range of industries such as automotive, industrial, consumer electronics, and telecommunications. -
Application Field
The STTS751-1DP3F is used in industrial and automotive applications for temperature measurement and thermal management. It is also used in consumer electronics such as smartphones and laptops for thermal control and protection. Additionally, it is used in medical devices for temperature monitoring and regulation. -
Package
The STTS751-1DP3F chip is in a surface-mount package type with a form of 6-Pin DFN (3x3mm) and a size of 3x3 mm.
データシート PDF
私たちは高品質の製品、思いやりのあるサービス、販売後の保証を提供します
-
![製品]( "製品")
豊富な商品を取り揃えておりますので、お客様の様々なニーズにお応え致します。
-
![quantity]( "quantity")
最小注文数量は1個からとなります。
-
![shipping]( "shipping")
最低国際配送料は0.00ドルから
-
![保証]( "保証")
全商品365日品質保証
