このウェブサイトは Cookie を使用しています。このサイトを使用すると、Cookie の使用に同意したことになります。詳細については、こちらをご覧くださいプライバシーポリシー.

画像は参考用です。製品仕様を参照してください。

ST STM32G491RET6

Name: STM32G491RET6
Rating: 4.5 (6 reviews)

ARM Microcontrollers - MCU Mainstream Arm Cortex-M4+ MCU 170MHz with 512Kbytes of Flash memory

ブランド: STMicroelectronics, Inc

製造元部品 #: STM32G491RET6

データシート: STM32G491RET6 Datasheet (PDF)

パッケージ/ケース: LQFP-64

製品の種類: 組み込みプロセッサ＆コントローラ

RoHS ステータス:

在庫状況: 3489 個、新しいオリジナル

Warranty: 1 Year Ovaga Warranty - Find Out More

ボムに追加

簡単な見積もり

RFQを提出してください STM32G491RET6 またはメールでご連絡ください: メール: [email protected], 12時間以内にご連絡させていただきます。

数量^*

メール^*

連絡先名^*

会社

述べる

STM32G491RET6 概要

The STM32G491xC/xE devices are based on the high-performance Arm®Cortex®-M4 32-bit RISC core. They operate at a frequency of up to 170 MHz.The Cortex-M4 core features a single-precision floating-point unit (FPU), which supports all the Arm single-precision data-processing instructions and all the data types. It also implements a full set of DSP (digital signal processing) instructions and a memory protection unit (MPU) which enhances the application’s security.These devices embed high-speed memories (512 Kbytes of Flash memory, and 112 Kbytes of SRAM), a Quad SPI Flash memory interface, an extensive range of enhanced I/Os and peripherals connected to two APB buses, two AHB buses and a 32-bit multi-AHB bus matrix.The devices also embed several protection mechanisms for embedded Flash memory and SRAM: readout protection, write protection, securable memory area and proprietary code readout protection.The devices embed peripherals allowing mathematical/arithmetic function acceleration (CORDIC for trigonometric functions and FMAC unit for filter functions).They offer three fast 12-bit ADCs (5 Msps), four comparators, four operational amplifiers, four DAC channels (2 external and 2 internal), an internal voltage reference buffer, a low-power RTC, one general-purpose 32-bit timers, three 16-bit PWM timers dedicated to motor control, seven general-purpose 16-bit timers, and one 16-bit low-power timer.They also feature standard and advanced communication interfaces such as:- Three I2Cs- Three SPIs multiplexed with two half duplex I2Ss- Three USARTs, two UARTs and one low-power UART.- Two FDCANs- One SAI- USB device- UCPDThe devices operate in the -40 to +85 °C (+105 °C junction) and -40 to +125 °C (+130 °C junction) temperature ranges from a 1.71 to 3.6 V power supply. A comprehensive set of power-saving modes allows the design of low-power applications.Some independent power supplies are supported including an analog independent supply input for ADC, DAC, OPAMPs and comparators. A VBATinput allows backup of the RTC and the registers.The STM32G491xC/xE family offers 9 packages from 32-pin to 100-pin.

特徴

Core: Arm^® 32-bit Cortex^®-M4 CPU with FPU, Adaptive real-time accelerator (ART Accelerator) allowing 0-wait-state execution from Flash memory, frequency up to 170 MHz with 213 DMIPS, MPU, DSP instructions
Operating conditions:
- V_DD, V_DDA voltage range: 1.71 V to 3.6 V
Mathematical hardware accelerators
- CORDIC for trigonometric functions acceleration
- FMAC: filter mathematical accelerator
Memories
- 512 Kbytes of Flash memory with ECC support, proprietary code readout protection (PCROP), securable memory area, 1 Kbyte OTP
- 96 Kbytes of SRAM, with hardware parity check implemented on the first 32 Kbytes
- Routine booster: 16 Kbytes of SRAM on instruction and data bus, with hardware parity check (CCM SRAM)
- Quad-SPI memory interface
Reset and supply management
- Power-on/power-down reset (POR/PDR/BOR)
- Programmable voltage detector (PVD)
- Low-power modes: sleep, stop, standby and shutdown
- V_BAT supply for RTC and backup registers
Clock management
- 4 to 48 MHz crystal oscillator
- 32 kHz oscillator with calibration
- Internal 16 MHz RC with PLL option (± 1%)
- Internal 32 kHz RC oscillator (± 5%)
Up to 86 fast I/Os
- All mappable on external interrupt vectors
- Several I/Os with 5 V tolerant capability
Interconnect matrix
16-channel DMA controller
3 x ADCs 0.25 µs (up to 36 channels). Resolution up to 16-bit with hardware oversampling, 0 to 3.6 V conversion range
4 x 12-bit DAC channels
- 2 x buffered external channels 1 MSPS
- 2 x unbuffered internal channels 15 MSPS
4 x ultra-fast rail-to-rail analog comparators
4 x operational amplifiers that can be used in PGA mode, all terminals accessible
Internal voltage reference

仕様

パラメータ	価値	パラメータ	価値
Pin Count	64	Package Category	Quad Flat Packages
Released Date	May 10, 2021

配送

	配送料	リードタイム
DHL	$20.00-$40.00 (0.50 KG)	2-5 日々
フェデックス	$20.00-$40.00 (0.50 KG)	2-5 日々
UPS	$20.00-$40.00 (0.50 KG)	2-5 日々
TNT	$20.00-$40.00 (0.50 KG)	2-5 日々
EMS	$20.00-$40.00 (0.50 KG)	2-5 日々
登録された航空便	$20.00-$40.00 (0.50 KG)	2-5 日々

処理時間：送料は地域や国によって異なります。

支払い

支払条件		ハンドフィー
	電信送金	銀行手数料 US$30.00 を請求します。
	ペイパル	4.0％のサービス料がかかります。
	クレジットカード	3.5％のサービス料がかかります。
	ウエスタンユニオン	charge US.00 banking fee.
	送金サービス	銀行手数料は 0.00 米ドルかかります。

保証

1.購入した電子部品には365日保証が含まれており、製品の品質を保証します。

2.受け取った商品の一部が完璧な品質ではない場合、当社は責任を持って返金または交換を手配します。ただし、商品は元の状態のままでなければなりません。

パッキング

ステップ1 :製品
ステップ2 :真空包装
ステップ3 :静電気防止袋
ステップ4 :個包装
ステップ5 :梱包箱
ステップ6 :バーコード配送タグ

すべての製品は静電気防止袋に梱包されます。 ESD 帯電防止保護を備えた状態で出荷されます。

社外の ESD 梱包ラベルには、部品番号、ブランド、数量などの当社の情報が使用されます。

私たちは出荷前にすべての商品を検査し、すべての製品が良好な状態であることを確認し、部品が新しいオリジナルでデータシートと一致していることを確認します。

すべての商品に問題がないことを確認した後、梱包後、安全に梱包し、グローバルエクスプレスで発送します。優れた耐穿刺性と耐引裂性を示し、シールの完全性も良好です。

パーツポイント

The STM32G491RET6 is a high-performance microcontroller from STMicroelectronics, featuring an Arm Cortex-M4 core running at up to 170 MHz. It offers a range of peripherals, advanced connectivity options, and enhanced security features, making it ideal for a wide range of applications in industrial control, power management, and motor control systems.
Equivalent

Some equivalent products of the STM32G491RET6 chip are STM32G491VET6, STM32G491RBT6, STM32G491RGT6, and STM32G491VGT6. These chips also belong to the STM32G4 series microcontrollers and offer similar features and performance capabilities.
Features

1. Arm Cortex-M4 core at 170 MHz 2. 500 KB Flash memory 3. 128 KB SRAM 4. High-speed ADC with 2 MSPS 5. 3 x DAC channels 6. USB Type-C Power Delivery support 7. Dual CAN FD interfaces 8. 12-bit ADC and 12-bit DAC 9. Quad-SPI interface and SDMMC 10. Advanced peripherals: timers, PWM, UART, I2C, SPI, I2S, SAI
Pinout

The STM32G491RET6 is a microcontroller with 64 pins. It is a high-performance Arm Cortex-M4 MCU with DSP and FPU instructions, suitable for digital power conversion and consumer devices. It offers 1 MB Flash memory and multiple communication interfaces for versatile application support.
Manufacturer

The manufacturer of the STM32G491RET6 is STMicroelectronics. It is a multinational semiconductor and electronics company that designs and produces a wide range of integrated circuits, including microcontrollers, sensors, power management, and wireless devices. STMicroelectronics is a leading supplier in the global semiconductor industry and serves various sectors such as automotive, industrial, consumer electronics, and telecommunications.
Application Field

The STM32G491RET6 microcontroller is suitable for a wide range of applications including industrial automation, motor control, power management, and digital power supplies. It can also be used in consumer electronics, home automation, and battery management systems thanks to its high performance, energy efficiency, and advanced peripherals.
Package

The STM32G491RET6 chip is available in a LQFP64 package, with a form factor of 10 mm x 10 mm.