このウェブサイトは Cookie を使用しています。このサイトを使用すると、Cookie の使用に同意したことになります。詳細については、こちらをご覧くださいプライバシーポリシー.

画像は参考用です。製品仕様を参照してください。

ST STM32F207ZCT6

Name: STM32F207ZCT6
Rating: 4.5 (5 reviews)

ARM Microcontrollers - MCU 32BIT ARM Cortex M3 Connectivity 256kB

ブランド: STMicroelectronics, Inc

製造元部品 #: STM32F207ZCT6

データシート: STM32F207ZCT6 Datasheet (PDF)

パッケージ/ケース: LQFP144

製品の種類: 組み込みプロセッサ＆コントローラ

RoHS ステータス:

在庫状況: 2667 個、新しいオリジナル

Warranty: 1 Year Ovaga Warranty - Find Out More

ボムに追加

簡単な見積もり

RFQを提出してください STM32F207ZCT6 またはメールでご連絡ください: メール: [email protected], 12時間以内にご連絡させていただきます。

数量^*

メール^*

連絡先名^*

会社

述べる

STM32F207ZCT6 概要

The STM32F20x family is based on the high-performance Arm®Cortex®-M3 32-bit RISC core operating at a frequency of up to 120 MHz. The family incorporates high-speed embedded memories (Flash memory up to 1 Mbyte, up to 128 Kbytes of system SRAM), up to 4 Kbytes of backup SRAM, and an extensive range of enhanced I/Os and peripherals connected to two APB buses, three AHB buses and a 32-bit multi-AHB bus matrix.The devices also feature an adaptive real-time memory accelerator (ART Accelerator™) that allows to achieve a performance equivalent to 0 wait state program execution from Flash memory at a CPU frequency up to 120 MHz. This performance has been validated using the CoreMark®benchmark.All devices offer three 12-bit ADCs, two DACs, a low-power RTC, twelve general-purpose 16-bit timers including two PWM timers for motor control, two general-purpose 32-bit timers. a true number random generator (RNG). They also feature standard and advanced communication interfaces. New advanced peripherals include an SDIO, an enhanced flexible static memory control (FSMC) interface (for devices offered in packages of 100 pins and more), and a camera interface for CMOS sensors. The devices also feature standard peripherals.STM32 Nucleo-144 development board with STM32F20.ST-LINK/V2 in-circuit debugger/programmer for ST.

特徴

Core: Arm^® 32-bit Cortex^®-M3 CPU (120 MHz max) with Adaptive real-time accelerator (ART Accelerator™) allowing 0-wait state execution performance from Flash memory, MPU, 150 DMIPS/1.25 DMIPS/MHz (Dhrystone 2.1)
Memories
- Up to 1 Mbyte of Flash memory
- 512 bytes of OTP memory
- Up to 128 + 4 Kbytes of SRAM
- Flexible static memory controller that supports Compact Flash, SRAM, PSRAM, NOR and NAND memories
- LCD parallel interface, 8080/6800 modes
Clock, reset and supply management
- From 1.8 to 3.6 V application supply + I/Os
- POR, PDR, PVD and BOR
- 4 to 26 MHz crystal oscillator
- Internal 16 MHz factory-trimmed RC
- 32 kHz oscillator for RTC with calibration
- Internal 32 kHz RC with calibration
Low-power modes
- Sleep, Stop and Standby modes
- V_BAT supply for RTC, 20 × 32 bit backup registers, and optional 4 Kbytes backup SRAM
3 × 12-bit, 0.5 µs ADCs with up to 24 channels and up to 6 MSPS in triple interleaved mode
2 × 12-bit D/A converters
General-purpose DMA: 16-stream controller with centralized FIFOs and burst support
Up to 17 timers
- Up to twelve 16-bit and two 32-bit timers, up to 120 MHz, each with up to four IC/OC/PWM or pulse counter and quadrature (incremental) encoder input
Debug mode: Serial wire debug (SWD), JTAG, and Cortex^®-M3 Embedded Trace Macrocell™
Up to 140 I/O ports with interrupt capability:
- Up to 136 fast I/Os up to 60 MHz
- Up to 138 5 V-tolerant I/Os
Up to 15 communication interfaces
- Up to three I²C interfaces (SMBus/PMBus)
- Up to four USARTs and two UARTs (7.5 Mbit/s, ISO 7816 interface, LIN, IrDA, modem control)
- Up to three SPIs (30 Mbit/s), two with muxed I²S to achieve audio class accuracy v

仕様

パラメータ	価値	パラメータ	価値
Pin Count	144	Package Category	Quad Flat Packages
Released Date	Dec 17, 2020

配送

	配送料	リードタイム
DHL	$20.00-$40.00 (0.50 KG)	2-5 日々
フェデックス	$20.00-$40.00 (0.50 KG)	2-5 日々
UPS	$20.00-$40.00 (0.50 KG)	2-5 日々
TNT	$20.00-$40.00 (0.50 KG)	2-5 日々
EMS	$20.00-$40.00 (0.50 KG)	2-5 日々
登録された航空便	$20.00-$40.00 (0.50 KG)	2-5 日々

処理時間：送料は地域や国によって異なります。

支払い

支払条件		ハンドフィー
	電信送金	銀行手数料 US$30.00 を請求します。
	ペイパル	4.0％のサービス料がかかります。
	クレジットカード	3.5％のサービス料がかかります。
	ウエスタンユニオン	charge US.00 banking fee.
	送金サービス	銀行手数料は 0.00 米ドルかかります。

保証

1.購入した電子部品には365日保証が含まれており、製品の品質を保証します。

2.受け取った商品の一部が完璧な品質ではない場合、当社は責任を持って返金または交換を手配します。ただし、商品は元の状態のままでなければなりません。

パッキング

ステップ1 :製品
ステップ2 :真空包装
ステップ3 :静電気防止袋
ステップ4 :個包装
ステップ5 :梱包箱
ステップ6 :バーコード配送タグ

すべての製品は静電気防止袋に梱包されます。 ESD 帯電防止保護を備えた状態で出荷されます。

社外の ESD 梱包ラベルには、部品番号、ブランド、数量などの当社の情報が使用されます。

私たちは出荷前にすべての商品を検査し、すべての製品が良好な状態であることを確認し、部品が新しいオリジナルでデータシートと一致していることを確認します。

すべての商品に問題がないことを確認した後、梱包後、安全に梱包し、グローバルエクスプレスで発送します。優れた耐穿刺性と耐引裂性を示し、シールの完全性も良好です。

パーツポイント

The STM32F207ZCT6 is a microcontroller chip manufactured by STMicroelectronics. It belongs to the STM32F2 series and is based on the ARM Cortex-M3 core. This chip offers a wide range of features and peripherals, including advanced analog and digital interfaces, memory, and communication interfaces. It is commonly used in various applications, such as industrial automation, consumer electronics, and automotive systems.
Equivalent

Some equivalent products of the STM32F207ZCT6 chip include STM32F207VCT6, STM32F207VET6, and STM32F207ZET6. These chips have similar specifications and capabilities, making them suitable alternatives to the STM32F207ZCT6.
Features

The STM32F207ZCT6 microcontroller features a 120 MHz ARM Cortex-M3 core, 2 MB Flash memory, 384 KB SRAM, and a wide range of peripherals including USB, Ethernet, CAN, and ADC. It also includes advanced power management features and supports various communication protocols such as I2C, SPI, and UART.
Pinout

The STM32F207ZCT6 is a microcontroller with a pin count of 144. It is a part of the STM32F2 series by STMicroelectronics. The specific functions of each pin can be found in the datasheet provided by the manufacturer.
Manufacturer

The manufacturer of the STM32F207ZCT6 is STMicroelectronics. It is a multinational semiconductor company that designs and manufactures a range of integrated circuits and semiconductors for various industries, including consumer electronics, automotive, and industrial applications. STMicroelectronics is renowned for its microcontroller products, including the STM32 series, which are widely used in embedded systems.
Application Field

The STM32F207ZCT6 is commonly used in various application areas such as industrial control systems, robotics, consumer electronics, medical devices, and communication equipment. Its high performance, extensive connectivity options, and sufficient memory make it suitable for a wide range of embedded system applications.
Package

The STM32F207ZCT6 chip comes in a LQFP package (Low-profile Quad Flat Package) which has a body size of 12mm x 12mm and a pitch of 0.5mm.