ST SPV1040T
High efficiency solar battery charger with embedded MPPT
ブランド: STMicroelectronics, Inc
製造元部品 #: SPV1040T
データシート: SPV1040T Datasheet (PDF)
パッケージ/ケース: TSSOP-8
製品の種類: 電源管理IC
SPV1040T 概要
The SPV1040 device is a low power, low voltage, monolithic step-up converter with an input voltage range from 0.3 V to 5.5 V, capable of maximizing the energy generated by solar cells (or fuel cells), where low input voltage handling capability is extremely important. Thanks to the embedded MPPT algorithm, even under varying environmental conditions (such as irradiation, dirt, temperature) the SPV1040 offers maximum efficiency in terms of power harvested from the cells and transferred to the output. The device employs a voltage regulation loop, which fixes the charging battery voltage via a resistor divider.It is possible to set the maximum output current according to charging requirements by a sense resistor .The SPV1040 protects itself and other application devices by stopping the PWM switching if either the maximum current threshold (up to 1.8 Apk) is reached or the maximum temperature limit (up to 155 °C) is exceeded. An additional built-in feature of the SPV1040 is the input source reverse polarity protection, which prevents damage in case of reverse connection of the solar panel on the input.Solar battery charger for Li-Ion batteries.Up to 5 W solar battery charger with embedded MP.
特徴
- 0.3 V to 5.5 V operating input voltage
- 140 mΩ internal synchronous rectifier
- 120 mΩ internal power active switch
- 100 kHz fixed PWM frequency
- Duty cycle controlled by MPPT algorithm
- Output voltage regulation, overcurrent and overtemperature protection
- Input source reverse polarity protection
- Built-in soft-start
- Up to 95% efficiency
- TSSOP8 package 3x4.4 mm
仕様
パラメータ | 価値 | パラメータ | 価値 |
---|---|---|---|
Manufacturer: | STMicroelectronics | Product Category: | Battery Management |
RoHS: | Details | Product: | Charge Management |
Output Voltage: | 2 V to 5.2 V | Output Current: | 1.65 A |
Operating Supply Voltage: | 300 mV to 5.5 V | Package / Case: | TSSOP-8 |
Mounting Style: | SMD/SMT | Series: | SPV1040 |
Packaging: | Tube | Brand: | STMicroelectronics |
Maximum Operating Temperature: | + 125 C | Minimum Operating Temperature: | - 40 C |
Moisture Sensitive: | Yes | Product Type: | Battery Management |
Factory Pack Quantity: | 2000 | Subcategory: | PMIC - Power Management ICs |
Type: | Voltage Converter |
配送
配送タイプ | 配送料 | リードタイム | |
---|---|---|---|
DHL | $20.00-$40.00 (0.50 KG) | 2-5 日々 | |
フェデックス | $20.00-$40.00 (0.50 KG) | 2-5 日々 | |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 日々 | |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 日々 | |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 日々 | |
登録された航空便 | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
処理時間:送料は地域や国によって異なります。
支払い
支払条件 | ハンドフィー | |
---|---|---|
電信送金 | 銀行手数料 US$30.00 を請求します。 | |
ペイパル | 4.0%のサービス料がかかります。 | |
クレジットカード | 3.5%のサービス料がかかります。 | |
ウエスタンユニオン | charge US.00 banking fee. | |
送金サービス | 銀行手数料は 0.00 米ドルかかります。 |
保証
1.購入した電子部品には365日保証が含まれており、製品の品質を保証します。
2.受け取った商品の一部が完璧な品質ではない場合、当社は責任を持って返金または交換を手配します。 ただし、商品は元の状態のままでなければなりません。
パッキング
-
ステップ1 :製品
-
ステップ2 :真空包装
-
ステップ3 :静電気防止袋
-
ステップ4 :個包装
-
ステップ5 :梱包箱
-
ステップ6 :バーコード配送タグ
すべての製品は静電気防止袋に梱包されます。 ESD 帯電防止保護を備えた状態で出荷されます。
社外の ESD 梱包ラベルには、部品番号、ブランド、数量などの当社の情報が使用されます。
私たちは出荷前にすべての商品を検査し、すべての製品が良好な状態であることを確認し、部品が新しいオリジナルでデータシートと一致していることを確認します。
すべての商品に問題がないことを確認した後、梱包後、安全に梱包し、グローバルエクスプレスで発送します。 優れた耐穿刺性と耐引裂性を示し、シールの完全性も良好です。
データシート PDF
私たちは高品質の製品、思いやりのあるサービス、販売後の保証を提供します
-
豊富な商品を取り揃えておりますので、お客様の様々なニーズにお応え致します。
-
最小注文数量は1個からとなります。
-
最低国際配送料は0.00ドルから
-
全商品365日品質保証
Average quality, but fast shipping made up for it