注文金額が
$5000PM25CLA120
Hybrid AC Motor Controller rated at 50A
![ISO14001](/img/about/iso14001.png)
![ISO9001](/img/about/iso9001.png)
![DUNS](/img/about/duns.png)
ブランド: Powerex Inc.
製造元部品 #: PM25CLA120
データシート: PM25CLA120 データシート (PDF)
パッケージ/ケース: PowerModule
製品の種類: Power Driver Modules
PM25CLA120 概要
Power Driver Module IGBT 3 Phase 1.2 kV 25 A Power Module
特徴
- Single Power Supply Operation
- - Low voltage range: 2.3 V – 3.6 V
- Memory Organization
- - Pm25LD512: 64K x 8 (512 Kbit)
- - Pm25LD010: 128K x 8 (1 Mbit)
- - Pm25LD020: 256K x 8 (2 Mbit)
- Cost Effective Sector/Block Architecture
- - 512Kb : Uniform 4KByte sectors / Two uniform 32KByte blocks
- - 1Mb : Uniform 4KByte sectors / Four uniform 32KByte blocks
- - 2Mb : Uniform 4KByte sectors / Four uniform
- 64KByte blocks
- Low standby current 1uA (Typ)
- Serial Peripheral Interface (SPI) Compatible
- - Supports single- or dual-output
- - Supports SPI Modes 0 and 3
- - Maximum 33 MHz clock rate for normal read
- - Maximum 100 MHz clock rate for fast read
- Page Program (up to 256 Bytes) Operation
- - Typical 2 ms per page program
- Sector, Block or Chip Erase Operation
- - Maximum 10 ms sector, block or chip erase
- Low Power Consumption
- - Typical 10 mA active read current
- - Typical 15 mA program/erase current
- Hardware Write Protection
- - Protect and unprotect the device from write operation by Write Protect (WP#) Pin
- Software Write Protection
- - The Block Protect (BP2, BP1, BP0) bits allow partial or entire memory to be configured as read only
- High Product Endurance
- - Guaranteed 200,000 program/erase cycles per single sector
- - Minimum 20 years data retention
- Industrial Standard Pin-out and Package
- - 8-pin 150mil SOIC
- - 8-pin 208mil SOIC for Pm25LD040
- - 8-pin 300mil PDIP for Pm25LD040
- - 8-contact WSON
- - 8-pin TSSOP
- - Lead-free (Pb-free), halogen-free package
仕様
パラメータ | 価値 | パラメータ | 価値 |
---|---|---|---|
Series | Intellimod™ | Package | Bulk |
Product Status | Obsolete | Type | IGBT |
Configuration | 3 Phase | Current | 25 A |
Voltage | 1.2 kV | Voltage - Isolation | 2500VDC |
Mounting Type | Chassis Mount |
配送
配送タイプ | 配送料 | リードタイム | |
---|---|---|---|
![]() |
DHL | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
![]() |
フェデックス | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
![]() |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
![]() |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
![]() |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
![]() |
登録された航空便 | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
処理時間:送料は地域や国によって異なります。
支払い
支払条件 | ハンドフィー | |
---|---|---|
![]() |
電信送金 | 銀行手数料 US$30.00 を請求します。 |
![]() |
ペイパル | 4.0%のサービス料がかかります。 |
![]() |
クレジットカード | 3.5%のサービス料がかかります。 |
![]() |
ウエスタンユニオン | charge US.00 banking fee. |
![]() |
送金サービス | 銀行手数料は 0.00 米ドルかかります。 |
保証
1.購入した電子部品には365日保証が含まれており、製品の品質を保証します。
2.受け取った商品の一部が完璧な品質ではない場合、当社は責任を持って返金または交換を手配します。 ただし、商品は元の状態のままでなければなりません。
パッキング
-
ステップ1 :製品
-
ステップ2 :真空包装
-
ステップ3 :静電気防止袋
-
ステップ4 :個包装
-
ステップ5 :梱包箱
-
ステップ6 :バーコード配送タグ
すべての製品は静電気防止袋に梱包されます。 ESD 帯電防止保護を備えた状態で出荷されます。
社外の ESD 梱包ラベルには、部品番号、ブランド、数量などの当社の情報が使用されます。
私たちは出荷前にすべての商品を検査し、すべての製品が良好な状態であることを確認し、部品が新しいオリジナルでデータシートと一致していることを確認します。
すべての商品に問題がないことを確認した後、梱包後、安全に梱包し、グローバルエクスプレスで発送します。 優れた耐穿刺性と耐引裂性を示し、シールの完全性も良好です。
私たちは高品質の製品、思いやりのあるサービス、販売後の保証を提供します
-
豊富な商品を取り揃えておりますので、お客様の様々なニーズにお応え致します。
-
最小注文数量は1個からとなります。
-
最低国際配送料は0.00ドルから
-
全商品365日品質保証