注文金額が
$5000PIC24FJ128GL306-I/MR
Advanced microprocessor offering powerful processing capabilities in a small footprint
![ISO14001](/img/about/iso14001.png)
![ISO9001](/img/about/iso9001.png)
![DUNS](/img/about/duns.png)
ブランド: Microchip
製造元部品 #: PIC24FJ128GL306-I/MR
データシート: PIC24FJ128GL306-I/MR データシート (PDF)
パッケージ/ケース: QFN-64
製品の種類: Microcontrollers
PIC24FJ128GL306-I/MR 概要
The PIC24FJ128GL306-I/MR microcontroller is a powerhouse of efficiency and innovation. Packed with core independent peripherals (CIPs), this family of low power microcontrollers offers an unparalleled level of functionality for your embedded applications. Its segmented LCD driver extends the capabilities of core independent animation, providing a versatile solution for a wide range of projects
特徴
- Segmented LCD Controller with Animation
- Up to 256 segments (8x commons and 32x segments)
- Core independent autonomous animation: Alternating dual display, blinking and blanking
- LCD Charge Pump for contrast management in battery-powered applications
- External bias option for reducing power consumption
- Operation in power-saving modes
- Core and Operating Conditions
- 2.0V to 3.6V, -40°C to 125°C, up to 16 MIPS operation
- Single-cycle instruction execution
- 16 x 16 Hardware Multiply, and 32-bit x 16-bit Hardware Divider
- C compiler optimized instruction set system
- AEC Q100 Grade 1 qualification
- eXtreme Low Power
- Ultra-low-power operation with sleep current down to nA with full RAM retention
- A range of power-saving modes to reduce current consumption, while balancing performance: PMD bits, DOZE, Idle, Sleep and Retention Sleep modes
- A range of Core Independent Peripherals (CIPs) that operate in power saving modes, while off-loading the Central Processing Unit (CPU)
- Secure Protection Features
- Flash ‘One Time Programming’ (OTP) by ICSP™ Write Inhibit that offers an ability to disable Flash erase/write/debug operations
- CodeGuard™ Flash protection to manage memory partitions and access restrictions
- 120-bit Unique Device ID, 256 bytes User OTP and the above protection schemes make an ideal combination of complementary features to implement security together with the CryptoAuthentication™ devices in a secure application
- Hardware Safety Features
- Flash with Error Correction Code (ECC) and Fault Injection for memory integrity check (Single error correction and Double error detection)
- Dead-Man Timer (DMT) clocked by instruction fetches for monitoring the health of software
- Windowed WatchDog Timer (WWDT) for system supervision
- CodeGuard™ Flash protection for memory partition and access restriction
- Fail-Safe Clock Monitor (FSCM) for clock fault management
- Enhanced Programmable Cyclic Redundancy Check (CRC), Programmable High-Low Voltage Detect (HLVD), Brown-out Reset (BOR) and Power-on Reset (POR)
- Class B Safety Library, IEC 60730
- Advanced Integrated Analog
- Up to 17-Channel, 400Ksps, 10/12-Bit Analog-to-Digital Converter (ADC)
- Low-voltage boost for input
- Bandgap reference input feature
- Core Independent windowed threshold compare feature
- Auto-scan feature
- Operation in power-saving modes
- Three Analog Comparators with input multiplexing and programmable reference voltage generators
- Timer/Counters/Output Compare/Input Capture/Pulse Width Modulation
- 5x 16-bit or 2x 32-bit dedicated timer/counters
- 14x PWM or Output Compare (OC) outputs with 5 independent timer bases – Multiple Capture Compare PWM (MCCP)
- 5x Input Captures (IC) – Multiple Capture Compare PWM (MCCP)
- A total of 15x 16-bit or 7x 32-bit timer/counters
- Hardware Real-Time Clock Calendar (RTCC) with Timestamping
- Core Independent Peripherals
- 4x Configurable Logic Cells (CLCs)
- 5x Multiple Capture Compare PWMs (MCCPs)
- Segmented LCD controller with Core Independent Animation, up to 256 segments (8 commons x 32 segments)
- ADC controller with threshold compare and automatic triggers
- Direct Memory Access (DMA) with 6 channels, supporting UART, SPI, ADC, and more
- Communication Interfaces
- 4x UARTs supporting LIN/J2602 and IrDA®
- 2x SPI/I2S, up to 25 MHz operation
- 2x I2C Master and Slave w/Address Masking, PMBus™ and IPMI support
- Clock Management
- On-chip 8 MHz Fast RC (FRC), and 32 kHz Low-Power RC (LPRC) and Secondary (SOSC) oscillators
- Programmable PLL with external oscillator clock sources and Reference Clock Output (REFO)
- Fail-Safe Clock Monitor (FSCM)
- Power-up Timer (PWRT) and Oscillator Start-up Timer (OST) supporting two-speed start-up
- Special Features and Debugger Development Support
- MPLAB Code Configurator (MCC) support
- Peripheral Pin Select (PPS) for flexible pin mapping
- Configurable interrupt-on change on all IOs
- In-Circuit Serial Programming™ (ICSP™) and In-Circuit Emulation (ICE) via 2-pins
- JTAG Boundary Scan Support
仕様
パラメータ | 価値 | パラメータ | 価値 |
---|---|---|---|
CPU Type | 16-bit PIC MCU | CPU Speed (MHz) | 16 |
Program Memory Size (KB) | 128 | Multiple Flash Panels | No |
Direct Memory Access (DMA) Channels | 6 | Temp. Range Min.(C°) | -40 |
Temp. Range Max.(C°) | 125 | Operation Voltage Min.(V) | 2 |
Operation Voltage Max.(V) | 3.6 | Pin Count | 64 |
Low Power | Yes | Number of Comparators | 3 |
Number of ADCs | 1 | ADC Channels | 17 |
Max ADC Resolution (bits) | 12 | Max ADC Sampling Rate (ksps) | 400 |
Number of DACs | 0 | DAC outputs | 0 |
Max DAC Resolution (bits) | 0 | Hardware RTCC | Yes |
Motor Control PWM Channels | 0 | SMPS PWM Channels | 0 |
Number of PWM Time Bases | 5 | Output Compare Channels | 5 |
USB Interface | None | Number of CAN Modules | 0 |
Type of CAN module | None | Crypto Engine | No |
Quadrature Encoder Interface (QEI) | 0 | Segment LCD | 256 |
LCD/Graphics Interface | No | Configurable Logic Cell Modules (CLC /CCL) | 4 |
Peripheral Pin Select (PPS)/Pin Muxing | Yes |
配送
配送タイプ | 配送料 | リードタイム | |
---|---|---|---|
![]() |
DHL | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
![]() |
フェデックス | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
![]() |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
![]() |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
![]() |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
![]() |
登録された航空便 | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
処理時間:送料は地域や国によって異なります。
支払い
支払条件 | ハンドフィー | |
---|---|---|
![]() |
電信送金 | 銀行手数料 US$30.00 を請求します。 |
![]() |
ペイパル | 4.0%のサービス料がかかります。 |
![]() |
クレジットカード | 3.5%のサービス料がかかります。 |
![]() |
ウエスタンユニオン | charge US.00 banking fee. |
![]() |
送金サービス | 銀行手数料は 0.00 米ドルかかります。 |
保証
1.購入した電子部品には365日保証が含まれており、製品の品質を保証します。
2.受け取った商品の一部が完璧な品質ではない場合、当社は責任を持って返金または交換を手配します。 ただし、商品は元の状態のままでなければなりません。
パッキング
-
ステップ1 :製品
-
ステップ2 :真空包装
-
ステップ3 :静電気防止袋
-
ステップ4 :個包装
-
ステップ5 :梱包箱
-
ステップ6 :バーコード配送タグ
すべての製品は静電気防止袋に梱包されます。 ESD 帯電防止保護を備えた状態で出荷されます。
社外の ESD 梱包ラベルには、部品番号、ブランド、数量などの当社の情報が使用されます。
私たちは出荷前にすべての商品を検査し、すべての製品が良好な状態であることを確認し、部品が新しいオリジナルでデータシートと一致していることを確認します。
すべての商品に問題がないことを確認した後、梱包後、安全に梱包し、グローバルエクスプレスで発送します。 優れた耐穿刺性と耐引裂性を示し、シールの完全性も良好です。
私たちは高品質の製品、思いやりのあるサービス、販売後の保証を提供します
-
豊富な商品を取り揃えておりますので、お客様の様々なニーズにお応え致します。
-
最小注文数量は1個からとなります。
-
最低国際配送料は0.00ドルから
-
全商品365日品質保証