このウェブサイトは Cookie を使用しています。このサイトを使用すると、Cookie の使用に同意したことになります。詳細については、こちらをご覧くださいプライバシーポリシー.

画像は参考用です。製品仕様を参照してください。

Microchip PIC18F46K42-I/PT

Name: PIC18F46K42-I/PT
Rating: 4.5 (6 reviews)

PIC PIC® XLP™ 18K Microcontroller IC 8-Bit 64MHz 64KB (32K x 16) FLASH 44-TQFP (10x10)

ブランド: Microchip Technology, Inc

製造元部品 #: PIC18F46K42-I/PT

データシート: PIC18F46K42-I/PT Datasheet (PDF)

パッケージ/ケース: TQFP-44

製品の種類: 組み込みプロセッサ＆コントローラ

RoHS ステータス:

在庫状況: 2134 個、新しいオリジナル

Warranty: 1 Year Ovaga Warranty - Find Out More

ボムに追加

簡単な見積もり

RFQを提出してください PIC18F46K42-I/PT またはメールでご連絡ください: メール: [email protected], 12時間以内にご連絡させていただきます。

数量^*

メール^*

連絡先名^*

会社

述べる

PIC18F46K42-I/PT 概要

8-bit Microcontrollers - MCU 64KB Flash, 4KB RAM, 1KB EEPROM, 12-bit ADC2, Vector Interrupts, DMA, MAP, DIA, DAC, Comp, PWM, CWG, HLT, WWDT, SCAN/CRC, ZCD, PPS, UART, SPI/I2C, IDLE/DOZE/PMD

特徴

Interrupt Vector Table
Programmable single or dual priority
Two level hardware context saving
Eliminates need for CPU involvement in data transfers
Access to all memory spaces and peripherals
Flexible source and destination message sizes
Programmable DMA priority
Memory Access Partition (MAP) - Customize flash partitioning with bootloader write protection
Device Information Area (DIA) - Dedicated memory area for data storage of temp sensor factory calibration value, factory ID and FVR values for ADC and COMP
WDT: 500nA @ 1.8V typical
SLEEP mode: 50nA @ 1.8V typical
DOZE mode allows CPU to run at a lower clock speed than peripherals
IDLE and SLEEP modes selectively shut down peripherals and/or core for power reduction
Averaging, filter calculations, oversampling and threshold comparison (ADCC)
Automates touch sampling and reduces software size and CPU usage when touch or proximity sensing is required (ADCC)
5-bit resolution, rail-to-rail (DAC)
Unbuffered I/O pin output
Comparator hysteresis enable
Invert output polarity
Fixed Voltage Reference (FVR) module - 1.024V, 2.048V and 4.096V output levels
Senses high voltage AC signal (ZCD)
Generates interrupts on zero cross (ZCD)
DMA compatible
Asynchronous UART, RS-232, RS-485 compatible
Programmable 1, 1.5, 2 stop bits
Configurable length bytes
Arbitrary length data packets
Separate transmit and receive buffers with 2-byte FIFO and DMA capabilities
SMBus, PMBUSTM compatible
In-Circuit Debug Integrated On-Chip
In-Circuit Serial Programing (ICSP) via Two Pins

仕様

パラメータ	価値	パラメータ	価値
Source Content uid	PIC18F46K42-I/PT	Rohs Code	Yes
Part Life Cycle Code	Active	Ihs Manufacturer	MICROCHIP TECHNOLOGY INC
Package Description	TQFP-44	Reach Compliance Code	compliant
ECCN Code	EAR99	HTS Code	8542.31.00.01
Factory Lead Time	47 Weeks	Date Of Intro	2017-06-16
Samacsys Manufacturer	Microchip	Has ADC	YES
Address Bus Width		Bit Size	8
Boundary Scan	NO	CPU Family	PIC18
Clock Frequency-Max	64 MHz	DAC Channels	YES
DMA Channels	YES	External Data Bus Width
Format	FIXED POINT	Integrated Cache	NO
JESD-30 Code	S-PQFP-G44	JESD-609 Code	e3
Length	10 mm	Low Power Mode	YES
Number of DMA Channels	2	Number of External Interrupts	3
Number of I/O Lines	36	Number of Serial I/Os	2
Number of Terminals	44	Number of Timers	7
On Chip Data RAM Width	8	On Chip Program ROM Width	16
Operating Temperature-Max	85 °C	Operating Temperature-Min	-40 °C
PWM Channels	YES	Package Body Material	PLASTIC/EPOXY
Package Code	TQFP	Package Equivalence Code	TQFP44,.39SQ,31
Package Shape	SQUARE	Package Style	FLATPACK, THIN PROFILE
RAM (bytes)	4096	RAM (words)	4096
ROM (words)	32768	ROM Programmability	FLASH
Seated Height-Max	1.2 mm	Speed	64 MHz
Supply Current-Max	18 mA	Supply Voltage-Max	5.5 V
Supply Voltage-Min	2.7 V	Supply Voltage-Nom	3 V
Surface Mount	YES	Technology	CMOS
Temperature Grade	INDUSTRIAL	Terminal Finish	MATTE TIN
Terminal Form	GULL WING	Terminal Pitch	0.8 mm
Terminal Position	QUAD	Width	10 mm
uPs/uCs/Peripheral ICs Type	MICROCONTROLLER, RISC	feature-tradename
feature-data-bus-width-bit	8	feature-interface-type	I2C/SPI/UART
feature-minimum-operating-supply-voltage-v	2.3	feature-maximum-operating-supply-voltage-v	5.5
feature-packaging		feature-rad-hard
feature-pin-count	44	feature-supplier-package	TQFP
feature-standard-package-name1	QFP	feature-cecc-qualified
feature-esd-protection		feature-escc-qualified
feature-military	No	feature-aec-qualified	No
feature-aec-qualified-number		feature-auto-motive	No
feature-p-pap	No	feature-eccn-code	3A991a.2.
feature-svhc	No

配送

	配送料	リードタイム
DHL	$20.00-$40.00 (0.50 KG)	2-5 日々
フェデックス	$20.00-$40.00 (0.50 KG)	2-5 日々
UPS	$20.00-$40.00 (0.50 KG)	2-5 日々
TNT	$20.00-$40.00 (0.50 KG)	2-5 日々
EMS	$20.00-$40.00 (0.50 KG)	2-5 日々
登録された航空便	$20.00-$40.00 (0.50 KG)	2-5 日々

処理時間：送料は地域や国によって異なります。

支払い

支払条件		ハンドフィー
	電信送金	銀行手数料 US$30.00 を請求します。
	ペイパル	4.0％のサービス料がかかります。
	クレジットカード	3.5％のサービス料がかかります。
	ウエスタンユニオン	charge US.00 banking fee.
	送金サービス	銀行手数料は 0.00 米ドルかかります。

保証

1.購入した電子部品には365日保証が含まれており、製品の品質を保証します。

2.受け取った商品の一部が完璧な品質ではない場合、当社は責任を持って返金または交換を手配します。ただし、商品は元の状態のままでなければなりません。

パッキング

ステップ1 :製品
ステップ2 :真空包装
ステップ3 :静電気防止袋
ステップ4 :個包装
ステップ5 :梱包箱
ステップ6 :バーコード配送タグ

すべての製品は静電気防止袋に梱包されます。 ESD 帯電防止保護を備えた状態で出荷されます。

社外の ESD 梱包ラベルには、部品番号、ブランド、数量などの当社の情報が使用されます。

私たちは出荷前にすべての商品を検査し、すべての製品が良好な状態であることを確認し、部品が新しいオリジナルでデータシートと一致していることを確認します。

すべての商品に問題がないことを確認した後、梱包後、安全に梱包し、グローバルエクスプレスで発送します。優れた耐穿刺性と耐引裂性を示し、シールの完全性も良好です。

パーツポイント

The PIC18F46K42-I/PT chip is a high-performance 8-bit microcontroller from Microchip Technology that features enhanced flash memory, rich peripherals, and improved analog features for various embedded applications. It has a versatile array of communication interfaces, advanced PWM modules, and low-power consumption capabilities, making it suitable for a range of industrial, automotive, and consumer electronics applications.
Equivalent

Some equivalent products to the PIC18F46K42-I/PT chip include PIC18F46K42-E/PT, PIC18F46K42-E/PTG, PIC18F46K42-E/PT, and PIC18F46K42-I/PTG. These chips have similar specifications and functionalities, making them suitable alternatives for a variety of applications.
Features

The PIC18F46K42-I/PT is a high-performance, 8-bit microcontroller from Microchip Technology. It features a 64 KB flash memory, 4 KB SRAM, up to 64 MHz operating frequency, and advanced peripherals such as ADC, PWM, and USART. It also offers low power consumption, EUSART, and USB connectivity for enhanced communication capabilities.
Pinout

The PIC18F46K42-I/PT is a 40-pin microcontroller with 33 I/O pins, 3 input-only pins, and 4 output-only pins. It also features communication peripherals such as SPI, I2C, and UART, as well as analog-to-digital converters. This microcontroller is commonly used in various industrial and consumer applications.
Manufacturer

The manufacturer of the PIC18F46K42-I/PT is Microchip Technology Inc. Microchip Technology is a leading provider of microcontroller, mixed-signal, analog and Flash-IP solutions. The company designs and manufactures a wide range of semiconductor products used in various applications such as automotive, industrial, consumer, and communication devices.
Application Field

The PIC18F46K42-I/PT microcontroller is commonly used in various applications such as industrial control systems, automotive electronics, home automation systems, medical devices, and consumer electronics. Its high performance, low power consumption, and rich set of peripherals make it suitable for a wide range of embedded applications.
Package

The PIC18F46K42-I/PT chip is a 44-pin TQFP package with a form factor of 10mm x 10mm and a size of 7mm x 7mm.