注文金額が
$5000TI OPA521IRGWR
General Purpose Amplifier 1 Circuit Single-Ended 20-VQFN (5x5)
ブランド: Texas Instruments
製造元部品 #: OPA521IRGWR
データシート: OPA521IRGWR データシート (PDF)
パッケージ/ケース:
RoHS ステータス:
在庫状況: 5,049 個、新しいオリジナル
製品の種類: Instrumentation, OP Amps, Buffer Amps
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
*すべての価格は米ドルです
数量 | 単価 | 外部価格 |
---|---|---|
1 | $3.503 | $3.503 |
10 | $3.053 | $30.530 |
30 | $2.785 | $83.550 |
100 | $2.515 | $251.500 |
500 | $2.389 | $1194.500 |
1000 | $2.334 | $2334.000 |
在庫あり: 5,049 PCS
OPA521IRGWR 概要
The OPA521 is a line-driver power amplifier that aligns with the power-line communications (PLC) conducted emissions requirements in CENELEC bands A, B, C, and D and ARIB STD-T84 and FCC Part 15. This device supplies up to 2.5 A on high-current, low-impedance lines with reactive loads. With optimized internal protection structure, the OPA521 uses minimal external protection components that enable cost- and space-effective systems.
The OPA521 gives a closed-loop gain of –7 V/V with 3.8-MHz of bandwidth. The monolithic integrated circuit gives high reliability in power-line communication applications.
The OPA521 line driver operates with a single supply from 7 V to 24 V. At a typical load current (IOUT = 2.5 A, maximum), a wide output swing gives a 10-VPP capability with a nominal 24-V supply.
The device has protection against overtemperature and short-circuit conditions. Fault detection flags show current and thermal limits. A shutdown pin is available, which places the device into a low-power state that consumes 58 µA (typical).
The OPA521 is available in a surface-mount, 5-mm × 5-mm, 20-pin VQFN (RGW) package. The device operates over the extended industrial junction temperature range of –40°C to +125°C.
特徴
- Supports:
- CENELEC Bands A, B, C, D
- ARIB STD-T84, FCC
- FSK, SFSK, and NB-OFDM
- Conforms To:
- EN50065-1, -2, -3, -7
- FCC, Part 15
- ARIB STD-T84
- Standards:
- G3, PRIME, P1901.2, ITU-G.hnem
- Line Driver With Integrated Thermal and Overcurrent Protection
- Pin-Selectable Quiescent Current Consumption:
- 58 µA in Standby Mode (Typical)
- 51 mA for CENELEC Bands A, B, C, D (Typical)
- 78 mA for FCC, ARIB STD-T84 (Typical)
- Package: 5-mm × 5-mm 20-Pin VQFN
- Operating Junction Temperature Range:
TA = –40°C to +125°C
仕様
パラメータ | 価値 | パラメータ | 価値 |
---|---|---|---|
Manufacturer | Texas Instruments | Product Category | Operational Amplifiers - Op Amps |
RoHS | Details | Mounting Style | SMD/SMT |
Package / Case | VQFN-20 | Number of Channels | 1 Channel |
Supply Voltage - Max | 24 V | GBP - Gain Bandwidth Product | 3.82 MHz |
Output Current per Channel | 2.5 A | SR - Slew Rate | 75 V/us |
Supply Voltage - Min | 7 V | Minimum Operating Temperature | - 40 C |
Maximum Operating Temperature | + 125 C | Ib - Input Bias Current | - |
Operating Supply Current | 78 mA | Shutdown | Shutdown |
CMRR - Common Mode Rejection Ratio | 92 dB | en - Input Voltage Noise Density | - |
Series | OPA521 | 3 dB Bandwidth | 800 kHz |
Amplifier Type | Line Driver Power Amplifier | Brand | Texas Instruments |
Development Kit | OPA521EVM | Features | Adj Current Limit, Shutdown |
Gain Error | 0.1 % | Gain V/V | - 7 V/V |
Moisture Sensitive | Yes | Product | Operational Amplifiers |
Product Type | Op Amps - Operational Amplifiers | PSRR - Power Supply Rejection Ratio | 94 dB |
Factory Pack Quantity | 3000 | Subcategory | Amplifier ICs |
Unit Weight | 0.002917 oz |
配送
配送タイプ | 配送料 | リードタイム | |
---|---|---|---|
DHL | $20.00-$40.00 (0.50 KG) | 2-5 日々 | |
フェデックス | $20.00-$40.00 (0.50 KG) | 2-5 日々 | |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 日々 | |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 日々 | |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 日々 | |
登録された航空便 | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
処理時間:送料は地域や国によって異なります。
支払い
支払条件 | ハンドフィー | |
---|---|---|
電信送金 | 銀行手数料 US$30.00 を請求します。 | |
ペイパル | 4.0%のサービス料がかかります。 | |
クレジットカード | 3.5%のサービス料がかかります。 | |
ウエスタンユニオン | charge US.00 banking fee. | |
送金サービス | 銀行手数料は 0.00 米ドルかかります。 |
保証
1.購入した電子部品には365日保証が含まれており、製品の品質を保証します。
2.受け取った商品の一部が完璧な品質ではない場合、当社は責任を持って返金または交換を手配します。 ただし、商品は元の状態のままでなければなりません。
パッキング
-
ステップ1 :製品
-
ステップ2 :真空包装
-
ステップ3 :静電気防止袋
-
ステップ4 :個包装
-
ステップ5 :梱包箱
-
ステップ6 :バーコード配送タグ
すべての製品は静電気防止袋に梱包されます。 ESD 帯電防止保護を備えた状態で出荷されます。
社外の ESD 梱包ラベルには、部品番号、ブランド、数量などの当社の情報が使用されます。
私たちは出荷前にすべての商品を検査し、すべての製品が良好な状態であることを確認し、部品が新しいオリジナルでデータシートと一致していることを確認します。
すべての商品に問題がないことを確認した後、梱包後、安全に梱包し、グローバルエクスプレスで発送します。 優れた耐穿刺性と耐引裂性を示し、シールの完全性も良好です。
私たちは高品質の製品、思いやりのあるサービス、販売後の保証を提供します
-
豊富な商品を取り揃えておりますので、お客様の様々なニーズにお応え致します。
-
最小注文数量は1個からとなります。
-
最低国際配送料は0.00ドルから
-
全商品365日品質保証