画像は参考用です。製品仕様を参照してください。
ADI OP213FPZ
General Purpose Amplifier 2 Circuit Rail-to-Rail 8-PDIP
ブランド: Analog Devices, Inc
製造元部品 #: OP213FPZ
データシート: OP213FPZ Datasheet (PDF)
パッケージ/ケース: PDIP-8
製品の種類: 増幅器IC
OP213FPZ 概要
The OPx13 family is unity gain stable and has a typical gain bandwidth product of 3.4 MHz. Slew rate is in excess of 1 V/μs. Noise density is a very low 4.7 nV/√Hz, and noise in the 0.1 Hz to 10 Hz band is 120 nV p-p. Input offset voltage is guaranteed and offset drift is guaranteed to be less than 0.8 μV/°C. Input common-mode range includes the negative supply and to within 1 V of the positive supply over the full supply range. Phase reversal protection is designed into the OPx13 family for cases where input voltage range is exceeded. Output voltage swings also include the negative supply and go to within 1 V of the positive rail. The output is capable of sinking and sourcing current throughout its range and is specified with 600 Ω loads.
特徴
- Single- or dual-supply operation
- Low noise: 4.7 nV/√Hz @ 1 kHz
- Wide bandwidth: 3.4 MHz
- Low offset voltage: 100 μV
- Very low drift: 0.2 μV/°C
- Unity gain stable
- No phase reversal
応用
- Digital scales
- Multimedia
- Strain gages
- Battery-powered instrumentation
- Temperature transducer amplifier
仕様
| パラメータ | 価値 | パラメータ | 価値 |
|---|---|---|---|
| feature-type | Low Noise Amplifier | feature-manufacturer-type | Low Noise Amplifier |
| feature-number-of-channels-per-chip | 2 | feature-rail-to-rail | |
| feature-process-technology | BiCMOS | feature-output-type | CMOS |
| feature-maximum-input-offset-voltage-mv | 0.3@5V | feature-maximum-supply-current-ma | |
| feature-maximum-input-offset-current-ua | 0.05@5V@-40C to 85C | feature-maximum-input-bias-current-ua | 0.65@5V |
| feature-maximum-power-dissipation-mw | feature-typical-slew-rate-v-us | 0.6(Min)@5V | |
| feature-typical-gain-bandwidth-product-mhz | 3.5 | feature-shut-down-support | No |
| feature-packaging | Tube | feature-rad-hard | |
| feature-pin-count | 8 | feature-supplier-package | PDIP N |
| feature-standard-package-name1 | DIP | feature-cecc-qualified | No |
| feature-esd-protection | Yes | feature-escc-qualified | |
| feature-military | No | feature-aec-qualified | No |
| feature-aec-qualified-number | feature-auto-motive | No | |
| feature-p-pap | No | feature-eccn-code | EAR99 |
| feature-svhc | No |
配送
| 配送タイプ | 配送料 | リードタイム | |
|---|---|---|---|
 |
DHL | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
 |
フェデックス | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
 |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
 |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
 |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
 |
登録された航空便 | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
処理時間：送料は地域や国によって異なります。
支払い
| 支払条件 | ハンドフィー | |
|---|---|---|
 |
電信送金 | 銀行手数料 US$30.00 を請求します。 |
 |
ペイパル | 4.0％のサービス料がかかります。 |
 |
クレジットカード | 3.5％のサービス料がかかります。 |
 |
ウエスタンユニオン | charge US.00 banking fee. |
 |
送金サービス | 銀行手数料は 0.00 米ドルかかります。 |
保証
1.購入した電子部品には365日保証が含まれており、製品の品質を保証します。
2.受け取った商品の一部が完璧な品質ではない場合、当社は責任を持って返金または交換を手配します。 ただし、商品は元の状態のままでなければなりません。
パッキング
-
![製品]( "製品")
ステップ1 :製品
-
![真空包装]( "真空包装")
ステップ2 :真空包装
-
![静電気防止袋]( "静電気防止袋")
ステップ3 :静電気防止袋
-
![個包装]( "個包装")
ステップ4 :個包装
-
![梱包箱]( "梱包箱")
ステップ5 :梱包箱
-
![バーコード配送タグ]( "バーコード配送タグ")
ステップ6 :バーコード配送タグ
すべての製品は静電気防止袋に梱包されます。 ESD 帯電防止保護を備えた状態で出荷されます。
社外の ESD 梱包ラベルには、部品番号、ブランド、数量などの当社の情報が使用されます。
私たちは出荷前にすべての商品を検査し、すべての製品が良好な状態であることを確認し、部品が新しいオリジナルでデータシートと一致していることを確認します。
すべての商品に問題がないことを確認した後、梱包後、安全に梱包し、グローバルエクスプレスで発送します。 優れた耐穿刺性と耐引裂性を示し、シールの完全性も良好です。
パーツポイント
-
The OP213FPZ is an integrated circuit (IC) chip that belongs to the operational amplifier (OP amp) family. It is designed to have a high-speed performance with low distortion and low power consumption. The chip is commonly used in various applications such as audio amplifiers, filters, and signal conditioning circuits.
-
Equivalent
Some equivalent products to the OP213FPZ chip are the AD842, AD806, AD829, AD8429, and LT1364 chips. -
Features
OP213FPZ is a low power, high precision operational amplifier (OPAMP) with rail-to-rail output swing. It offers low input bias current, low offset voltage, low distortion, and wide bandwidth, making it suitable for precision applications. It operates from a single power supply and is available in an 8-pin PDIP package. -
Pinout
The OP213FPZ is a dual operational amplifier with a pin count of 8. It has two independent operational amplifiers that can be used for amplification, filtering, and signal conditioning in various applications. -
Manufacturer
The manufacturer of the OP213FPZ is Analog Devices. Analog Devices is a multinational semiconductor company that specializes in designing and manufacturing analog, mixed-signal, and digital signal processing integrated circuits. They provide solutions for various industries, including automotive, healthcare, communications, and industrial applications. -
Application Field
The OP213FPZ is an operational amplifier commonly used in audio and signal processing applications, instrumentation and control systems, and communication equipment. It is also suitable for use in low noise and precision amplification circuits, data acquisition systems, and sensor interface circuits. -
Package
The OP213FPZ chip is available in a DIP package type, with 8 pins. Its form is DIP (Dual In-line Package), which means the pins are arranged in two parallel rows. The size of the chip is typically smaller than regular through-hole DIP packages, with dimensions of approximately 9.81mm x 6.49mm x 3.43mm.
データシート PDF
私たちは高品質の製品、思いやりのあるサービス、販売後の保証を提供します
-
![製品]( "製品")
豊富な商品を取り揃えておりますので、お客様の様々なニーズにお応え致します。
-
![quantity]( "quantity")
最小注文数量は1個からとなります。
-
![shipping]( "shipping")
最低国際配送料は0.00ドルから
-
![保証]( "保証")
全商品365日品質保証
Ovaga is a trustworthy supplier that always delivers top-quality components.