注文金額が
$5000ON NCT75MNR2G
Temperature Sensor Digital, Local -55°C ~ 125°C 11 b 8-DFN (2x2)
ブランド: ON Semiconductor, LLC
製造元部品 #: NCT75MNR2G
データシート: NCT75MNR2G Datasheet (PDF)
パッケージ/ケース: DFN-8
製品の種類: 温度センサ
NCT75MNR2G 概要
NCT75 is a two-wire serially programmable temperature sensor with an overtemperature/interrupt output pin to signal out of limit conditions. This is an open drain pin and can operate in either comparator or interrupt mode. Temperature measurements are converted into digital form using a high resolution (12 bit), sigma-delta, analog-to-digital converter (ADC). The device operates over the -55°C to +125°C temperature range.
Communication with the NCT75 is accomplished via the SMBus/I2C interface which is compatible with industry standard protocols. Three address selection pins, A2, A1 and A0, can be used to connect up to 8 NCT75s to a single bus. Through this interface the NCT75s internal registers may be accessed. These registers allow the user to read the current temperature, change the configuration settings and adjust the temperature limits.
The NCT75 has a wide supply voltage range of 3.0 V to 5.5 V. The average supply current is 575 µA at 3.3 V. It also offers a shutdown mode to conserve power. The typical shutdown current is 3 µA.
The NCT75 is available in three, space saving packages - DFN-8, MSOP-8 and SOIC-8 and is also fully pin and register compatible with the LM75 and the TCN75.
特徴
- 12-bit temperature-to-digital converter
- Input voltage range from 3.0 V to 5.5 V
- Temperature range from -55°C to +125°C
- SMBus/I2C Interface
- Overtemperature Indicator
- Support for SMBus /ALERT
- Shutdown mode for low power consumption
- One-Shot Mode
応用
- Thermal Management
仕様
パラメータ | 価値 | パラメータ | 価値 |
---|---|---|---|
Manufacturer | ON Semiconductor | Product Category | Temperature Sensors, Transducers |
Series | NCT75 | Product | Temperature Sensor |
Packaging | Digi-ReelR Alternate Packaging | Mounting-Style | SMD/SMT |
Package-Case | DFN-8 | Operating-Temperature | -55°C ~ 125°C |
Output-Type | I2C/SMBus | Features | One-Shot, Output Switch, Programmable Limit, Shutdown Mode |
Voltage-Supply | 3 V ~ 5.5 V | Supplier-Device-Package | 8-DFN (2x2) |
Configuration | Local | Resolution | 11 b |
Accuracy | +/- 3 C | Sensor-Type | Digital, Local |
Test-Condition | 0°C ~ 70°C (-55°C ~ 125°C) | Shutdown | Shutdown |
Sensing-Temperature-Local | -55°C ~ 125°C | Sensing-Temperature-Remote | - |
Accuracy-Highest-Lowest | ±1°C (±3°C) | Maximum-Operating-Temperature | + 125 C |
Minimum-Operating-Temperature | - 55 C | Operating-Supply-Current | 800 uA |
Interface-Type | 2-Wire I2C SMBus | Supply-Voltage-Max | 5.5 VDC |
Supply-Voltage-Min | 3 VDC | Tags | NCT75M, NCT75, NCT7, NCT |
Manufacturer: | onsemi | Product Category: | Board Mount Temperature Sensors |
RoHS: | Details | Output Type: | Digital |
Configuration: | Local | Accuracy: | +/- 3 C |
Supply Voltage - Min: | 3 V | Supply Voltage - Max: | 5.5 V |
Interface Type: | 2-Wire, I2C, SMBus | Resolution: | 12 bit |
Minimum Operating Temperature: | - 55 C | Maximum Operating Temperature: | + 125 C |
Shutdown: | Shutdown | Mounting Style: | SMD/SMT |
Package / Case: | DFN-8 | Packaging: | MouseReel |
Brand: | onsemi | Operating Supply Current: | 800 uA |
Product: | Temperature Sensors | Product Type: | Temperature Sensor ICs |
Series: | NCT75 | Factory Pack Quantity: | 3000 |
Subcategory: | Sensors | Type: | Temperature Sensor |
Unit Weight: | 0.000332 oz |
配送
配送タイプ | 配送料 | リードタイム | |
---|---|---|---|
DHL | $20.00-$40.00 (0.50 KG) | 2-5 日々 | |
フェデックス | $20.00-$40.00 (0.50 KG) | 2-5 日々 | |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 日々 | |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 日々 | |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 日々 | |
登録された航空便 | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
処理時間:送料は地域や国によって異なります。
支払い
支払条件 | ハンドフィー | |
---|---|---|
電信送金 | 銀行手数料 US$30.00 を請求します。 | |
ペイパル | 4.0%のサービス料がかかります。 | |
クレジットカード | 3.5%のサービス料がかかります。 | |
ウエスタンユニオン | charge US.00 banking fee. | |
送金サービス | 銀行手数料は 0.00 米ドルかかります。 |
保証
1.購入した電子部品には365日保証が含まれており、製品の品質を保証します。
2.受け取った商品の一部が完璧な品質ではない場合、当社は責任を持って返金または交換を手配します。 ただし、商品は元の状態のままでなければなりません。
パッキング
-
ステップ1 :製品
-
ステップ2 :真空包装
-
ステップ3 :静電気防止袋
-
ステップ4 :個包装
-
ステップ5 :梱包箱
-
ステップ6 :バーコード配送タグ
すべての製品は静電気防止袋に梱包されます。 ESD 帯電防止保護を備えた状態で出荷されます。
社外の ESD 梱包ラベルには、部品番号、ブランド、数量などの当社の情報が使用されます。
私たちは出荷前にすべての商品を検査し、すべての製品が良好な状態であることを確認し、部品が新しいオリジナルでデータシートと一致していることを確認します。
すべての商品に問題がないことを確認した後、梱包後、安全に梱包し、グローバルエクスプレスで発送します。 優れた耐穿刺性と耐引裂性を示し、シールの完全性も良好です。
パーツポイント
-
The NCT75MNR2G is a digital temperature sensor chip that offers high accuracy temperature measurement with a resolution of 9 to 12 bits. It features a wide temperature range of -55°C to +125°C and is ideal for various applications such as industrial control systems, power supply monitoring, and environmental monitoring.
-
Equivalent
Some equivalent products of the NCT75MNR2G chip are NCT75L120S, NCT75L120AS, and NCT75L120A. These chips are also temperature sensors and offer similar functionalities and features as the NCT75MNR2G chip. -
Features
NCT75MNR2G is a 75 V N-channel MOSFET with low on-resistance and high power dissipation capability. It features a compact package design, making it suitable for various applications such as power supplies, LED lighting, and motor control. -
Pinout
NCT75MNR2G is a 5-pin digital temperature sensor that provides temperature sensing with an accuracy of ±1°C. Pinout: 1-Vcc, 2-GND, 3-SDA (I2C data line), 4-SCL (I2C clock line), 5-ADDR (I2C address select). It is commonly used for temperature monitoring in electronic devices. -
Manufacturer
ON Semiconductor is the manufacturer of NCT75MNR2G. It is a global supplier of energy-efficient semiconductor components for a wide range of industries, including automotive, communications, computing, consumer, industrial, and medical. ON Semiconductor focuses on creating innovative and environmentally friendly solutions to help its customers reduce their carbon footprint and achieve sustainability goals. -
Application Field
The NCT75MNR2G is commonly used in temperature sensing applications such as in smartphones, tablets, laptops, and wearable devices for monitoring and controlling the temperature of the device. It is also suitable for industrial automation, consumer electronics, and automotive applications where accurate temperature measurements are required. -
Package
The NCT75MNR2G chip is a temperature sensor in a SOT-23 package. It is a surface-mount form factor that measures 2.9mm x 1.6mm x 1.4mm in size.
データシート PDF
私たちは高品質の製品、思いやりのあるサービス、販売後の保証を提供します
-
豊富な商品を取り揃えておりますので、お客様の様々なニーズにお応え致します。
-
最小注文数量は1個からとなります。
-
最低国際配送料は0.00ドルから
-
全商品365日品質保証
Efficient and effective electronic component for our business.