ADI MAX235EPG
MAX235EPG offers a cost-effective solution for creating stable and robust RS-232 interfaces in a wide range of electronic devices
ブランド: Analog Devices Inc.
製造元部品 #: MAX235EPG
データシート: MAX235EPG Datasheet (PDF)
パッケージ/ケース: PDIP-24
製品の種類: インターフェイスIC
MAX235EPG 概要
The MAX235EPG is a precision, low-power, dual-supply RS-232 line receiver/transmitter designed for serial communication in industrial control applications. It is manufactured by Maxim Integrated and comes in a 24-pin wide SO package.The device operates on a dual power supply range of ±4.5V to ±5.5V, making it suitable for a wide range of industrial and automation applications. It features four receivers and two transmitters, making it ideal for full-duplex communication. The receiver has a high sensitivity, allowing it to receive signals at low voltages and maintain accurate data transmission.The MAX235EPG incorporates a patented hot-swap feature that allows it to be plugged into live circuits without causing damage. This feature is particularly useful in applications where the device needs to be hot-swapped or connected to existing live circuits without disrupting operations.In terms of performance, the MAX235EPG has a data rate of 120kbps and a maximum propagation delay of 0.5µs. It also has low power consumption, making it suitable for battery-powered applications.
特徴
- 5V-powered, multichannel RS-232 drivers/receivers
- Operates from a single +5V power supply
- Integrated charge pump voltage converter
- Guaranteed data rate of 120kbps
- Requires only four 0.1μF capacitors
- Low-power shutdown mode
応用
- Industrial control systems
- Instrumentation
- Data acquisition systems
- Power management systems
- Telecommunications
- Process control systems
- Medical equipment
- Networking equipment
- Security systems
- Automotive electronics
仕様
パラメータ | 価値 | パラメータ | 価値 |
---|---|---|---|
Product Category | RS-232 Interface IC | Mounting Style | Through Hole |
Package / Case | PDIP-24 | Series | MAX235 |
Function | Transceiver | Data Rate | 120 kb/s |
Number of Drivers | 5 Driver | Number of Receivers | 5 Receiver |
Supply Voltage - Max | 5.5 V | Supply Voltage - Min | 4.5 V |
Operating Supply Current | 15 mA | Minimum Operating Temperature | - 40 C |
Maximum Operating Temperature | + 85 C | Brand | Analog Devices / Maxim Integrated |
Height | 4.45 mm (Max) | Length | 32.26 mm (Max) |
Operating Supply Voltage | 5 V | Product | RS-232 Transceivers |
Product Type | RS-232 Interface IC | Propagation Delay Time | 10 us |
Shutdown | With Shutdown | Subcategory | Interface ICs |
Supply Type | Single Supply | Width | 14.61 mm (Max) |
Part # Aliases | MAX235 |
配送
配送タイプ | 配送料 | リードタイム | |
---|---|---|---|
DHL | $20.00-$40.00 (0.50 KG) | 2-5 日々 | |
フェデックス | $20.00-$40.00 (0.50 KG) | 2-5 日々 | |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 日々 | |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 日々 | |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 日々 | |
登録された航空便 | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
処理時間:送料は地域や国によって異なります。
支払い
支払条件 | ハンドフィー | |
---|---|---|
電信送金 | 銀行手数料 US$30.00 を請求します。 | |
ペイパル | 4.0%のサービス料がかかります。 | |
クレジットカード | 3.5%のサービス料がかかります。 | |
ウエスタンユニオン | charge US.00 banking fee. | |
送金サービス | 銀行手数料は 0.00 米ドルかかります。 |
保証
1.購入した電子部品には365日保証が含まれており、製品の品質を保証します。
2.受け取った商品の一部が完璧な品質ではない場合、当社は責任を持って返金または交換を手配します。 ただし、商品は元の状態のままでなければなりません。
パッキング
-
ステップ1 :製品
-
ステップ2 :真空包装
-
ステップ3 :静電気防止袋
-
ステップ4 :個包装
-
ステップ5 :梱包箱
-
ステップ6 :バーコード配送タグ
すべての製品は静電気防止袋に梱包されます。 ESD 帯電防止保護を備えた状態で出荷されます。
社外の ESD 梱包ラベルには、部品番号、ブランド、数量などの当社の情報が使用されます。
私たちは出荷前にすべての商品を検査し、すべての製品が良好な状態であることを確認し、部品が新しいオリジナルでデータシートと一致していることを確認します。
すべての商品に問題がないことを確認した後、梱包後、安全に梱包し、グローバルエクスプレスで発送します。 優れた耐穿刺性と耐引裂性を示し、シールの完全性も良好です。
パーツポイント
-
The MAX235EPG is a dual RS-232 driver/receiver chip from Maxim Integrated. It allows for easy interfacing between a microcontroller or other digital device and an RS-232 communication line, providing signal conditioning and voltage level conversion. The chip operates in a wide voltage range and is commonly used in industrial and communication applications.
-
Equivalent
The equivalent products of MAX235EPG chip are MAX235CPG, MAX235CPP+, and MAX235CPP. These chips are also RS-232 transceivers that provide significant improvements over traditional devices in terms of power consumption, ESD protection, and data rate capabilities. -
Features
The MAX235EPG is a RS-232 transceiver with 4 drivers and 5 receivers. It operates from a single +5V power supply and has low power consumption. The device is designed to operate at data rates up to 120kbps and has a high data rate and low distortion. -
Pinout
The MAX235EPG is a 5V-powered, multichannel RS-232 driver/receiver with ±15 kV ESD protection and 120 kbit/s of data rate. Its pin count is 24, and its functions include transmitting and receiving data, controlling the driver, and providing ESD protection for RS-232 communication. -
Manufacturer
The MAX235EPG is manufactured by Maxim Integrated, which is a manufacturer of analog and mixed-signal integrated circuits. Maxim Integrated focuses on delivering innovative solutions for a wide range of applications in automotive, industrial, healthcare, and consumer markets. They offer a comprehensive portfolio of high-performance products that help engineers design cutting-edge electronic systems. -
Application Field
The MAX235EPG is commonly used in applications requiring RS-232 communication, such as industrial automation, instrumentation, and networking equipment. It is also suitable for use in data acquisition systems, PLCs, and consumer electronics devices. Additionally, it can be used in medical devices, automotive systems, and industrial control applications. -
Package
The MAX235EPG chip comes in a 24-pin plastic SSOP (Shrink Small-Outline Package) form. The size of the package is 0.15" x 0.29" x 0.075".
データシート PDF
私たちは高品質の製品、思いやりのあるサービス、販売後の保証を提供します
-
豊富な商品を取り揃えておりますので、お客様の様々なニーズにお応え致します。
-
最小注文数量は1個からとなります。
-
最低国際配送料は0.00ドルから
-
全商品365日品質保証