注文金額が
$5000ADI MAX1508ETA+
Linear Li+ Battery Charger with Integrated Pass FET, Thermal Regulation, and ACOK Flag in 3mm x 3mm TDFN
![ISO14001](/img/about/iso14001.png)
![ISO9001](/img/about/iso9001.png)
![DUNS](/img/about/duns.png)
ブランド: Analog Devices, Inc
製造元部品 #: MAX1508ETA+
データシート: MAX1508ETA+ データシート (PDF)
パッケージ/ケース: TDFN-8
製品の種類: Battery Chargers
MAX1508ETA+ 概要
The MAX1508 is an intelligent, stand-alone constant-current, constant-voltage (CCCV), thermally regulated linear charger for a single-cell lithium-ion (Li+) battery. The MAX1508 integrates the current-sense circuit, MOS pass element, and thermal-regulation circuitry, and also eliminates the reverse-blocking Schottky diode, to create the simplest and smallest charging solution for hand-held equipment.
特徴
- Stand-Alone Linear 1-Cell Li+ Battery Charger
- No External FET, Reverse-Blocking Diode, or Current-Sense Resistor Required
- Programmable Fast-Charge Current (0.8A max)
- Proprietary Die-Temperature Regulation Control (+100°C)
- +4.25V to +13V Input Voltage Range with Input Overvoltage Protection (OVP) Above +7V
- Charge-Current Monitor for Fuel Gauging
- Low Dropout Voltage—130mV at 0.425A
- Input Power-Source Detection Output (Active-Low ACOK)
- Soft-Start Limits Inrush Current
- No Prequalification State for the MAX1508Y and MAX1508Z
- Charge Status Output (Active-Low CHG) for LED or Microprocessor Interface
- Small 3mm x 3mm 8-Pin Thin DFN Package, 0.8mm High
- Active-Low Charge Enable (Active-Low EN) (MAX1508 and MAX1508Z)
- Active-High Charge Enable (EN) (MAX1508Y)
応用
- Bluetooth® Equipment
- Cell Phones/Cordless Phones
- Charging Cradles and Docks
- Digital Cameras and MP3 Players
- PDAs
- USB Appliances
仕様
パラメータ | 価値 | パラメータ | 価値 |
---|---|---|---|
Manufacturer: | Analog Devices Inc. | Product Category: | Battery Management |
Product: | Charge Management | Battery Type: | Lithium-ion, Lithium Polymer |
Operating Supply Voltage: | 4.25 V to 6.5 V | Series: | MAX1508 |
Packaging: | Reel | Brand: | Analog Devices / Maxim Integrated |
Operating Supply Current: | 800 uA | Product Type: | Battery Management |
Factory Pack Quantity: | 2500 | Subcategory: | PMIC - Power Management ICs |
Part # Aliases: | MAX1508 |
配送
配送タイプ | 配送料 | リードタイム | |
---|---|---|---|
![]() |
DHL | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
![]() |
フェデックス | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
![]() |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
![]() |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
![]() |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
![]() |
登録された航空便 | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
処理時間:送料は地域や国によって異なります。
支払い
支払条件 | ハンドフィー | |
---|---|---|
![]() |
電信送金 | 銀行手数料 US$30.00 を請求します。 |
![]() |
ペイパル | 4.0%のサービス料がかかります。 |
![]() |
クレジットカード | 3.5%のサービス料がかかります。 |
![]() |
ウエスタンユニオン | charge US.00 banking fee. |
![]() |
送金サービス | 銀行手数料は 0.00 米ドルかかります。 |
保証
1.購入した電子部品には365日保証が含まれており、製品の品質を保証します。
2.受け取った商品の一部が完璧な品質ではない場合、当社は責任を持って返金または交換を手配します。 ただし、商品は元の状態のままでなければなりません。
パッキング
-
ステップ1 :製品
-
ステップ2 :真空包装
-
ステップ3 :静電気防止袋
-
ステップ4 :個包装
-
ステップ5 :梱包箱
-
ステップ6 :バーコード配送タグ
すべての製品は静電気防止袋に梱包されます。 ESD 帯電防止保護を備えた状態で出荷されます。
社外の ESD 梱包ラベルには、部品番号、ブランド、数量などの当社の情報が使用されます。
私たちは出荷前にすべての商品を検査し、すべての製品が良好な状態であることを確認し、部品が新しいオリジナルでデータシートと一致していることを確認します。
すべての商品に問題がないことを確認した後、梱包後、安全に梱包し、グローバルエクスプレスで発送します。 優れた耐穿刺性と耐引裂性を示し、シールの完全性も良好です。
私たちは高品質の製品、思いやりのあるサービス、販売後の保証を提供します
-
豊富な商品を取り揃えておりますので、お客様の様々なニーズにお応え致します。
-
最小注文数量は1個からとなります。
-
最低国際配送料は0.00ドルから
-
全商品365日品質保証