LSF0102QDCURQ1
Level shifter translator 0.95V~4.5V 0.9mm -40C~125C
ブランド: Texas Instruments
製造元部品 #: LSF0102QDCURQ1
データシート: LSF0102QDCURQ1 データシート (PDF)
パッケージ/ケース: VSSOP (DCU)-8
LSF0102QDCURQ1 概要
The LSF0102-Q1 device is an auto bidirectional voltage translator that translates among a wide range of supplies without the need for a directional pin. The LSF0102-Q1 supports up to 100 MHz up translation and greater than 100 MHz down translation with capacitive loads ≤ 30 pF. Additionally, the LSF0102-Q1 supports up to 40 MHz up and down translation at 50 pF capacitance load, which enables the LSF0102-Q1 device to support a wide variety of standard interfaces commonly found in automotive applications such as I 2C, SPI, GPIO, SDIO, UART, and MDIO.
The LSF0102-Q1 device has 5-V tolerant data inputs. This makes the device compatible with TTL voltage levels. Furthermore, the LSF0102-Q1 supports mixed-mode voltage translation, allowing the device to up translate and down translate to different supply levels on each channel.
特徴
- AEC-Q100 qualified for automotive applications
- Temperature grade 1: –40°C ≤ T A ≤ 125°C
- Device HBM ESD Classification Level 2
- CDM ESD Classification Level C6
- Provides bidirectional voltage translation with no direction Pin
- Supports open drain and push-pull applications such as I 2C, SPI, UART, MDIO, SDIO, and GPIO
- Supports up to 100 MHz up translation and greater than 100 MHz down translation at ≤ 30pF cap load and up to 40 MHz up or down translation at 50 pF cap load
- Enables bidirectional voltage level translation between
- 0.95 V ↔ 1.8/2.5/3.3/5 V
- 1.2 V ↔ 1.8/2.5/3.3/5 V
- 1.8 V ↔ 2.5/3.3/5 V
- 2.5 V ↔ 3.3/5 V
- 3.3 V ↔ 5 V
- Low standby current
- 5 V tolerant I/O ports to support TTL voltage levels
- Low r on provides less signal distortion
- High-impedance I/O pins when EN = low
- Flow-through pinout for ease of PCB trace routing
- Latch-up performance exceeds 100 mA per JESD 78, Class II
応用
仕様
パラメータ | 価値 | パラメータ | 価値 |
---|---|---|---|
Technology family | LSF | Applications | I2C |
Bits (#) | 2 | Data rate (max) (MBps) | 100 |
High input voltage (min) (V) | 0.9 | High input voltage (max) (V) | 5.5 |
Vout (min) (V) | 0.9 | Vout (max) (V) | 5.5 |
IOH (max) (mA) | 0 | IOL (max) (mA) | 0 |
Supply current (max) (µA) | 0.01 | Features | Output enable |
Input type | Transmission Gate | Output type | 3-State, Transmission Gate |
Rating | Automotive |
配送
配送タイプ | 配送料 | リードタイム | |
---|---|---|---|
DHL | $20.00-$40.00 (0.50 KG) | 2-5 日々 | |
フェデックス | $20.00-$40.00 (0.50 KG) | 2-5 日々 | |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 日々 | |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 日々 | |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 日々 | |
登録された航空便 | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
処理時間:送料は地域や国によって異なります。
支払い
支払条件 | ハンドフィー | |
---|---|---|
電信送金 | 銀行手数料 US$30.00 を請求します。 | |
ペイパル | 4.0%のサービス料がかかります。 | |
クレジットカード | 3.5%のサービス料がかかります。 | |
ウエスタンユニオン | charge US.00 banking fee. | |
送金サービス | 銀行手数料は 0.00 米ドルかかります。 |
保証
1.購入した電子部品には365日保証が含まれており、製品の品質を保証します。
2.受け取った商品の一部が完璧な品質ではない場合、当社は責任を持って返金または交換を手配します。 ただし、商品は元の状態のままでなければなりません。
パッキング
-
ステップ1 :製品
-
ステップ2 :真空包装
-
ステップ3 :静電気防止袋
-
ステップ4 :個包装
-
ステップ5 :梱包箱
-
ステップ6 :バーコード配送タグ
すべての製品は静電気防止袋に梱包されます。 ESD 帯電防止保護を備えた状態で出荷されます。
社外の ESD 梱包ラベルには、部品番号、ブランド、数量などの当社の情報が使用されます。
私たちは出荷前にすべての商品を検査し、すべての製品が良好な状態であることを確認し、部品が新しいオリジナルでデータシートと一致していることを確認します。
すべての商品に問題がないことを確認した後、梱包後、安全に梱包し、グローバルエクスプレスで発送します。 優れた耐穿刺性と耐引裂性を示し、シールの完全性も良好です。
私たちは高品質の製品、思いやりのあるサービス、販売後の保証を提供します
-
豊富な商品を取り揃えておりますので、お客様の様々なニーズにお応え致します。
-
最小注文数量は1個からとなります。
-
最低国際配送料は0.00ドルから
-
全商品365日品質保証