注文金額が
$5000ST L6983IQTR
Buck Switching Regulator IC Positive, Isolation Capable Adjustable 1V 1 Output 3A (Switch) 16-WFQFN Exposed Pad
![ISO14001](/img/about/iso14001.png)
![ISO9001](/img/about/iso9001.png)
![DUNS](/img/about/duns.png)
L6983IQTR 概要
The L6983I is a highly specialized device tailored for isolated buck topology, offering precise adjustment of the primary output voltage and a secondary output derived through transformer ratio, eliminating the need for an optocoupler. With a primary sink capability of up to -4.5 A, energy transfer to the secondary side is optimized, and a tracked soft-start of the secondary output is enabled. Operating on a peak current mode architecture, this device functions in forced PWM mode with a 390 ns blanking time to filter out oscillations caused by transformer leakage inductance, enhancing robustness. The compact QFN16 3x3 mm package and internal compensation simplify design complexity and size. Additionally, users can program the switching frequency in the 200 kHz - 1 MHz range, with optional spread spectrum for improved EMC. The EN pin allows for enable/disable functionality, with a low shutdown current of 2 μA when disabled, and a swift 1.3 ms soft-start upon re-enabling. A Power Good open collector monitors the FB voltage, while pulse by pulse current sensing and thermal shutdown offer effective constant current protection and prevent thermal run-away
特徴
- High-performance architecture
- Faster response times
- Simplified circuit design
仕様
パラメータ | 価値 | パラメータ | 価値 |
---|---|---|---|
feature-type | Synchronous Step Down | feature-maximum-power-dissipation-mw | |
feature-packaging | Tape and Reel | feature-rad-hard | |
feature-pin-count | 16 | feature-supplier-package | QFN EP |
feature-standard-package-name1 | feature-cecc-qualified | ||
feature-esd-protection | feature-escc-qualified | ||
feature-military | No | feature-aec-qualified | No |
feature-aec-qualified-number | feature-auto-motive | No | |
feature-p-pap | No | feature-eccn-code | EAR99 |
feature-svhc |
配送
配送タイプ | 配送料 | リードタイム | |
---|---|---|---|
![]() |
DHL | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
![]() |
フェデックス | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
![]() |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
![]() |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
![]() |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
![]() |
登録された航空便 | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
処理時間:送料は地域や国によって異なります。
支払い
支払条件 | ハンドフィー | |
---|---|---|
![]() |
電信送金 | 銀行手数料 US$30.00 を請求します。 |
![]() |
ペイパル | 4.0%のサービス料がかかります。 |
![]() |
クレジットカード | 3.5%のサービス料がかかります。 |
![]() |
ウエスタンユニオン | charge US.00 banking fee. |
![]() |
送金サービス | 銀行手数料は 0.00 米ドルかかります。 |
保証
1.購入した電子部品には365日保証が含まれており、製品の品質を保証します。
2.受け取った商品の一部が完璧な品質ではない場合、当社は責任を持って返金または交換を手配します。 ただし、商品は元の状態のままでなければなりません。
パッキング
-
ステップ1 :製品
-
ステップ2 :真空包装
-
ステップ3 :静電気防止袋
-
ステップ4 :個包装
-
ステップ5 :梱包箱
-
ステップ6 :バーコード配送タグ
すべての製品は静電気防止袋に梱包されます。 ESD 帯電防止保護を備えた状態で出荷されます。
社外の ESD 梱包ラベルには、部品番号、ブランド、数量などの当社の情報が使用されます。
私たちは出荷前にすべての商品を検査し、すべての製品が良好な状態であることを確認し、部品が新しいオリジナルでデータシートと一致していることを確認します。
すべての商品に問題がないことを確認した後、梱包後、安全に梱包し、グローバルエクスプレスで発送します。 優れた耐穿刺性と耐引裂性を示し、シールの完全性も良好です。
私たちは高品質の製品、思いやりのあるサービス、販売後の保証を提供します
-
豊富な商品を取り揃えておりますので、お客様の様々なニーズにお応え致します。
-
最小注文数量は1個からとなります。
-
最低国際配送料は0.00ドルから
-
全商品365日品質保証