注文金額が
$5000NXP ISP1583
Hi-SpeedUniversalSerialBusperipheralcontroller
![ISO14001](/img/about/iso14001.png)
![ISO9001](/img/about/iso9001.png)
![DUNS](/img/about/duns.png)
ISP1583 概要
General descriptionThe ISP1583 is a cost-optimized and feature-optimized Hi-Speed Universal Serial Bus (USB) peripheral controller. It fully complies with Universal Serial Bus Specification Rev. 2.0, supporting data transfer at high-speed (480 Mbit/s) and full-speed (12 Mbit/s).The ISP1583 provides high-speed USB communication capacity to systems based on microcontrollers or microprocessors. It communicates with a microcontroller or microprocessor of a system through a high-speed general-purpose parallel interface. The ISP1583 supports automatic detection of Hi-Speed USB system operation.Original USB fall-back mode allows the device to remain operational under full-speed conditions. It is designed as a generic USB peripheral controller so that it can fit into all existing device classes, such as imaging class, mass storage devices, communication devices, printing devices and human interface devices.The ISP1583 is a low-voltage device, which supports I/O pad voltages from 1.65 V to 3.6 V.Features■ Complies fully with: ◆ Universal Serial Bus Specification Rev. 2.0 ◆ Most Device Class specifications ◆ ACPI™, OnNow™ and USB power management requirements■ Supports data transfer at high-speed (480 Mbit/s) and full-speed (12 Mbit/s)■ Direct interface to ATA/ATAPI peripherals; applicable only in split bus mode■ High performance USB peripheral controller with integrated Serial Interface Engine (SIE), Parallel Interface Engine (PIE), FIFO memory and data transceiver■ Automatic Hi-Speed USB mode detection and Original USB fall-back mode■ Supports sharing mode■ Supports I/O voltage range of 1.65 V to 3.6 V■ Supports VBUS sensing■ High-speed DMA interface■ Configurable direct access data path from the microprocessor to an ATA device■ Fully autonomous and multi configuration DMA operation■ 7 IN endpoints, 7 OUT endpoints and a fixed control IN/OUT endpoint■ Integrated physical 8 kbytes of multi configuration FIFO memory■ Endpoints with double buffering to increase throughput and ease real-time data transfer■ Bus-independent interface with most microcontrollers and microprocessors■ 12 MHz crystal oscillator with integrated PLL for low EMI■ Software-controlled connection to the USB bus (SoftConnect™)■ Low-power consumption in operation and power-down modes; suitable for use in bus-powered USB devices■ Supports Session Request Protocol (SRP) that complies with On-The-Go Supplement to the USB Specification Rev. 1.0a■ Internal power-on and low-voltage reset circuits; also supports software reset■ Operation over the extended USB bus voltage range (DP, DM and VBUS)■ 5 V tolerant I/O pads at 3.3 V■ Operating temperature range from −40 °C to +85 °C■ Available in HVQFN64 halogen-free and lead-free package.Applications■ Personal digital assistant■ Mass storage device, for example: Zip, Magneto-Optical (MO), CD and DVD drives■ Digital video camera■ Digital still camera■ 3G mobile phone■ MP3 player■ Communication device, for example: router and modem■ Printer
特徴
- Complies fully with:
- Universal Serial Bus Specification Rev. 2.0
- Most Device Class specifications
- ACPI™, OnNow™ and USB power management requirements
- Supports data transfer at high-speed (480 Mbit/s) and full-speed (12 Mbit/s)
- Direct interface to ATA/ATAPI peripherals; applicable only in split bus mode
- High performance USB peripheral controller with integrated Serial Interface Engine (SIE), Parallel Interface Engine (PIE), FIFO memory and data transceiver
- Automatic Hi-Speed USB mode detection and Original USB fall-back mode
- Supports sharing mode
- Supports I/O voltage range of 1.65 V to 3.6 V
- Supports VBUS sensing
- High-speed DMA interface
- Configurable direct access data path from the microprocessor to an ATA device
- Fully autonomous and multi configuration DMA operation
- 7 IN endpoints, 7 OUT endpoints and a fixed control IN/OUT endpoint
- Integrated physical 8 kbytes of multi configuration FIFO memory
- Endpoints with double buffering to increase throughput and ease real-time data transfer
- Bus-independent interface with most microcontrollers and microprocessors
- 12 MHz crystal oscillator with integrated PLL for low EMI
- Software-controlled connection to the USB bus (SoftConnect™)
- Low-power consumption in operation and power-down modes; suitable for use in bus-powered USB devices
- Supports Session Request Protocol (SRP) that complies with On-The-Go Supplement to the USB Specification Rev. 1.0a
- Internal power-on and low-voltage reset circuits; also supports software reset
- Operation over the extended USB bus voltage range (DP, DM and VBUS)
- 5 V tolerant I/O pads at 3.3 V
- Operating temperature range from −40 °C to +85 °C
- Available in HVQFN64 halogen-free and lead-free package.
配送
配送タイプ | 配送料 | リードタイム | |
---|---|---|---|
![]() |
DHL | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
![]() |
フェデックス | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
![]() |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
![]() |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
![]() |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
![]() |
登録された航空便 | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
処理時間:送料は地域や国によって異なります。
支払い
支払条件 | ハンドフィー | |
---|---|---|
![]() |
電信送金 | 銀行手数料 US$30.00 を請求します。 |
![]() |
ペイパル | 4.0%のサービス料がかかります。 |
![]() |
クレジットカード | 3.5%のサービス料がかかります。 |
![]() |
ウエスタンユニオン | charge US.00 banking fee. |
![]() |
送金サービス | 銀行手数料は 0.00 米ドルかかります。 |
保証
1.購入した電子部品には365日保証が含まれており、製品の品質を保証します。
2.受け取った商品の一部が完璧な品質ではない場合、当社は責任を持って返金または交換を手配します。 ただし、商品は元の状態のままでなければなりません。
パッキング
-
ステップ1 :製品
-
ステップ2 :真空包装
-
ステップ3 :静電気防止袋
-
ステップ4 :個包装
-
ステップ5 :梱包箱
-
ステップ6 :バーコード配送タグ
すべての製品は静電気防止袋に梱包されます。 ESD 帯電防止保護を備えた状態で出荷されます。
社外の ESD 梱包ラベルには、部品番号、ブランド、数量などの当社の情報が使用されます。
私たちは出荷前にすべての商品を検査し、すべての製品が良好な状態であることを確認し、部品が新しいオリジナルでデータシートと一致していることを確認します。
すべての商品に問題がないことを確認した後、梱包後、安全に梱包し、グローバルエクスプレスで発送します。 優れた耐穿刺性と耐引裂性を示し、シールの完全性も良好です。
私たちは高品質の製品、思いやりのあるサービス、販売後の保証を提供します
-
豊富な商品を取り揃えておりますので、お客様の様々なニーズにお応え致します。
-
最小注文数量は1個からとなります。
-
最低国際配送料は0.00ドルから
-
全商品365日品質保証