画像は参考用です。製品仕様を参照してください。
TI ISO1044BDR
CAN Interface IC Isolated CAN FD transceiver in small package 8-SOIC -40 to 125
ISO1044BDR 概要
The ISO1044B device is a galvanically-isolated controller area network (CAN) transceiver that meets the specifications of the ISO11898-2 (2016) standard. The ISO1044B device offers ±58-V DC bus fault protection and ±12-V common-mode voltage range. The device supports up to 5-Mbps data rate in CAN FD mode allowing much faster transfer of payload compared to classic CAN. This device uses a silicon dioxide (SiO2) insulation barrier with a withstand voltage of 3000 VRMS and a working voltage of 450 VRMS. Electromagnetic compatibility has been significantly enhanced to enable system-level ESD, EFT, surge, and emissions compliance. Used in conjunction with isolated power supplies, the device protects against high voltage, and prevents noise currents from the bus from entering the local ground. The ISO1044B device supports a wide ambient temperature range of –40°C to +125°C. The device is available in the small SOIC-8 (D) package which significantly reduces the solution size compared to a traditional approach using optocouplers to isolate the CAN transceiver.
特徴
- Meets the ISO 11898-2:2016 physical layer standard
- Supports classic CAN up to 1 Mbps and FD (flexible data rate) up to 5 Mbps
- Protection features
- DC Bus Fault Protection Voltage: ±58 V
- IEC ESD tolerance on bus pins: ±8 kV
- HBM ESD tolerance on bus pins: ±10 kV
- Driver dominant time out (TXD DTO)
- Undervoltage protection on VCC1 and VCC2
- Common-mode voltage range: ±12 V
- Ideal passive, high impedance bus terminals when unpowered
- High CMTI: 85 kV/µs minimum
- VCC1 voltage range: 1.71 V to 5.5 V
- Supports 1.8-V, 2.5-V, 3.3-V and 5.0-V logic interface to the CAN controller
- VCC2 voltage range: 4.5 V to 5.5 V
- Robust electromagnetic compatibility (EMC)
- System-Level ESD, EFT, and surge Immunity
- Low Emissions
- Ambient temperature range: –40°C to +125°C
- 8-SOIC package
- Safety-related certifications:
- All certifications planned
- VDE reinforced insulation per DIN VDE V 0884-11:2017-01
- UL 1577 component recognition program
- IEC 60950-1, IEC 62368-1, IEC 61010-1 and GB 4943.1-2011 certifications
仕様
| パラメータ | 価値 | パラメータ | 価値 |
|---|---|---|---|
| Rating | Catalog | Isolation rating | Basic |
| Data rate (max) (MBps) | 5 | Working isolation voltage (VIOWM) (Vrms) | 459 |
| Surge isolation voltage (VIOSM) (VPK) | 5000, 8000 | Transient isolation voltage (VIOTM) (VPK) | 4242 |
| Withstand isolation voltage (VISO) (Vrms) | 3000 | CMTI (min) (kV/µs) | 85 |
| Supply voltage (V) | 1.71 to 5.5, 4.5 to 5.5 | Bus fault voltage (V) | -58 to 58 |
| Common-mode voltage (V) | -12 to 12 |
配送
| 配送タイプ | 配送料 | リードタイム | |
|---|---|---|---|
 |
DHL | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
 |
フェデックス | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
 |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
 |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
 |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
 |
登録された航空便 | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
処理時間：送料は地域や国によって異なります。
支払い
| 支払条件 | ハンドフィー | |
|---|---|---|
 |
電信送金 | 銀行手数料 US$30.00 を請求します。 |
 |
ペイパル | 4.0％のサービス料がかかります。 |
 |
クレジットカード | 3.5％のサービス料がかかります。 |
 |
ウエスタンユニオン | charge US.00 banking fee. |
 |
送金サービス | 銀行手数料は 0.00 米ドルかかります。 |
保証
1.購入した電子部品には365日保証が含まれており、製品の品質を保証します。
2.受け取った商品の一部が完璧な品質ではない場合、当社は責任を持って返金または交換を手配します。 ただし、商品は元の状態のままでなければなりません。
パッキング
-
![製品]( "製品")
ステップ1 :製品
-
![真空包装]( "真空包装")
ステップ2 :真空包装
-
![静電気防止袋]( "静電気防止袋")
ステップ3 :静電気防止袋
-
![個包装]( "個包装")
ステップ4 :個包装
-
![梱包箱]( "梱包箱")
ステップ5 :梱包箱
-
![バーコード配送タグ]( "バーコード配送タグ")
ステップ6 :バーコード配送タグ
すべての製品は静電気防止袋に梱包されます。 ESD 帯電防止保護を備えた状態で出荷されます。
社外の ESD 梱包ラベルには、部品番号、ブランド、数量などの当社の情報が使用されます。
私たちは出荷前にすべての商品を検査し、すべての製品が良好な状態であることを確認し、部品が新しいオリジナルでデータシートと一致していることを確認します。
すべての商品に問題がないことを確認した後、梱包後、安全に梱包し、グローバルエクスプレスで発送します。 優れた耐穿刺性と耐引裂性を示し、シールの完全性も良好です。
パーツポイント
-
The ISO1044BDR is a digital isolator with reinforced insulation for high voltage applications. It provides up to 4 kVrms continuous isolation, helping to protect sensitive circuits from voltage spikes and noise. The chip features a wide operating temperature range and low power consumption, making it suitable for industrial, automotive, and other demanding environments.
-
Equivalent
The equivalent products of ISO1044BDR chip are ISO1044DBR, ISO1044ADR, ISO1044DR and ISO1042DR chips. -
Features
ISO1044BDR is a 2.5 V, 1 μA, 40 nA IQ, dual output, 75 mA low-dropout voltage regulator with power-good output, voltage monitor, and reset capability. It has high PSRR and low noise. -
Pinout
The ISO1044BDR has a pin count of 20 and is a digital isolator with four channels providing galvanic isolation for Serial Peripheral Interface (SPI) communication. It is designed to transfer data between isolated circuits in high-noise environments. -
Manufacturer
The manufacturer of the ISO1044BDR is Texas Instruments. Texas Instruments is a semiconductor design and manufacturing company that specializes in developing analog and digital chips for a variety of industries, including consumer electronics, automotive, and industrial applications. -
Application Field
ISO1044BDR is a precision sensor amplifier used in industrial applications requiring accurate voltage or current signal conditioning. It is commonly used in process control, automation, robotics, and test and measurement equipment to amplify and condition sensor signals for reliable and accurate data acquisition. -
Package
The ISO1044BDR chip comes in a Small Outline Integrated Circuit (SOIC) package type with a form of surface mount. The size of the chip is 8-SOIC, which indicates 8 pins in a Small Outline package.
私たちは高品質の製品、思いやりのあるサービス、販売後の保証を提供します
-
![製品]( "製品")
豊富な商品を取り揃えておりますので、お客様の様々なニーズにお応え致します。
-
![quantity]( "quantity")
最小注文数量は1個からとなります。
-
![shipping]( "shipping")
最低国際配送料は0.00ドルから
-
![保証]( "保証")
全商品365日品質保証
