このウェブサイトは Cookie を使用しています。 このサイトを使用すると、Cookie の使用に同意したことになります。 詳細については、こちらをご覧ください プライバシーポリシー.

注文金額が

$5000
得る $50 割引!

Renesas F6123SAVGI

RF Receiver F6123S KA DUAL-BEAM RX BEAMFORMER

ISO14001 ISO9001 DUNS

ブランド: Renesas Technology Corp

製造元部品 #: F6123SAVGI

データシート: F6123SAVGI データシート (PDF)

パッケージ/ケース: FCBGA-63

RoHS ステータス:

在庫状況: 2,894 個、新しいオリジナル

Warranty: 1 Year Ovaga Warranty - Find Out More

簡単な見積もり

RFQを提出してください F6123SAVGI またはメールでご連絡ください: メール: [email protected], 12時間以内にご連絡させていただきます。

F6123SAVGI 概要

The F6123 is a 16-channel dual-beam receive active beamforming RFIC designed for application in Ku/CDL-Band planar phased array antennas. The IC has eight RF input ports, two RF output ports and 16 (8 per beam) phase/amplitude control channels. The eight input ports of the IC may be driven by eight single-polarized elements or four dual-polarized elements of an electronically scanned array (ESA). Each channel has 6-bits of digital phase and gain control resolution spanning 360° and 26dB of dynamic range, enabling precise beam pattern and polarization control.

The IC operates from a single supply of 2.1V–2.5V. When paired with the Renesas F6923 LNA, it achieves a nominal cascaded gain of 30dB, while minimizing the front end feed loss due to the flexibility of LNA physical placement near the antenna feeds. The chip includes power management features such as a low power standby mode, independent enable controls on every channel and a single-beam mode activated via a dedicated control pin. The device SPI bus and control pins operate from standard 1.8V logic at speeds up to 50MHz. Advanced digital modes and large on-chip memory allow for <100ns beam position switching times at the array level, greatly reducing dead time and latency.

Finally, the compact and CTE-matched FC-BGA organic package with all single-ended 50Ω matched RF ports and 0.5mm pitch greatly simplifies the physical integration of these devices onto large antenna panels.

特徴

  • 14.0GHz–17.0GHz operation
  • Supports 4 dual-pol or 8 single-pol elements
  • Two simultaneous and independent beam outputs
  • 360° phase control with 6-bit resolution
  • 26dB gain control with 0.45dB step size
  • 2.3V nominal single supply input
  • Standard 1.8V digital logic
  • IDAC for external LNA biasing
  • Temperature compensation
  • Temperature sensor with digital readout
  • Advanced digital modes with fast beam steering
  • On-chip beam-state memory
  • 3.8 × 4.6 × 0.9 mm, 63-pin FC-BGA

仕様

パラメータ 価値 パラメータ 価値
Pkg. Type FCCSP Lead Count (#) 63
Temp. Grade I Temp. Range -40 to 85°C
Carrier Type Tray

配送

配送タイプ 配送料 リードタイム
DHL DHL $20.00-$40.00 (0.50 KG) 2-5 日々
Fedex フェデックス $20.00-$40.00 (0.50 KG) 2-5 日々
UPS UPS $20.00-$40.00 (0.50 KG) 2-5 日々
TNT TNT $20.00-$40.00 (0.50 KG) 2-5 日々
EMS EMS $20.00-$40.00 (0.50 KG) 2-5 日々
登録された航空便 登録された航空便 $20.00-$40.00 (0.50 KG) 2-5 日々

処理時間:送料は地域や国によって異なります。

支払い

支払条件 ハンドフィー
電信送金 電信送金 銀行手数料 US$30.00 を請求します。
ペイパル ペイパル 4.0%のサービス料がかかります。
クレジットカード クレジットカード 3.5%のサービス料がかかります。
ウエスタンユニオン ウエスタンユニオン charge US.00 banking fee.
送金サービス 送金サービス 銀行手数料は 0.00 米ドルかかります。

保証

1.購入した電子部品には365日保証が含まれており、製品の品質を保証します。

2.受け取った商品の一部が完璧な品質ではない場合、当社は責任を持って返金または交換を手配します。 ただし、商品は元の状態のままでなければなりません。

パッキング

  • 製品

    ステップ1 :製品

  • 真空包装

    ステップ2 :真空包装

  • 静電気防止袋

    ステップ3 :静電気防止袋

  • 個包装

    ステップ4 :個包装

  • 梱包箱

    ステップ5 :梱包箱

  • バーコード配送タグ

    ステップ6 :バーコード配送タグ

すべての製品は静電気防止袋に梱包されます。 ESD 帯電防止保護を備えた状態で出荷されます。

社外の ESD 梱包ラベルには、部品番号、ブランド、数量などの当社の情報が使用されます。

私たちは出荷前にすべての商品を検査し、すべての製品が良好な状態であることを確認し、部品が新しいオリジナルでデータシートと一致していることを確認します。

すべての商品に問題がないことを確認した後、梱包後、安全に梱包し、グローバルエクスプレスで発送します。 優れた耐穿刺性と耐引裂性を示し、シールの完全性も良好です。

  • ESD
  • ESD

私たちは高品質の製品、思いやりのあるサービス、販売後の保証を提供します

  • 製品

    豊富な商品を取り揃えておりますので、お客様の様々なニーズにお応え致します。

  • quantity

    最小注文数量は1個からとなります。

  • shipping

    最低国際配送料は0.00ドルから

  • 保証

    全商品365日品質保証

評価とレビュー

評価
製品を評価してください。
コメントを入力してください

コメントはアカウントにログインしてから送信してください。

提出する

推薦する