注文金額が
$5000
Intel EP2C35F672I8
33216 2076 FBGA-672 EP2C35F672I8 Programmable Logic Device (CPLDs/FPGAs) ROHS
![ISO14001](/img/about/iso14001.png)
![ISO9001](/img/about/iso9001.png)
![DUNS](/img/about/duns.png)
ブランド: INTEL CORP
製造元部品 #: EP2C35F672I8
データシート: EP2C35F672I8 データシート (PDF)
パッケージ/ケース: FBGA-672
RoHS ステータス:
在庫状況: 7,629 個、新しいオリジナル
製品の種類: FPGAs (Field Programmable Gate Array)
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
*すべての価格は米ドルです
数量 | 単価 | 外部価格 |
---|---|---|
1 | $269.378 | $269.378 |
200 | $104.247 | $20849.400 |
500 | $100.584 | $50292.000 |
1000 | $98.773 | $98773.000 |
在庫あり: 7,629 PCS
EP2C35F672I8 概要
The EP2C35F672I8 is a cutting-edge field-programmable gate array (FPGA) developed by Intel. With an impressive 35,376 logic elements, 1,152 kilobits of embedded memory, and 288 embedded multipliers, this FPGA is designed to deliver high-performance results for a wide range of applications. Operating at a maximum frequency of 315 megahertz and featuring 672 user I/O pins, the EP2C35F672I8 is well-equipped to handle complex tasks with speed and efficiency
特徴
- High-density architecture with 4,608 to 68,416 LEs
- M4K embedded memory blocks
- Up to 1.1 Mbits of RAM available without reducing available logic
- 4,096 memory bits per block (4,608 bits per block including 512 parity bits)
- Variable port configurations of ×1, ×2, ×4, ×8, ×9, ×16, ×18, ×32, and ×36
- True dual-port (one read and one write, two reads, or two writes) operation for ×1, ×2, ×4, ×8, ×9, ×16, and ×18 modes
- Byte enables for data input masking during writes
- Up to 260-MHz operation
- Embedded multipliers
- Up to 150 18- × 18-bit multipliers are each configurable as two independent 9- × 9-bit multipliers with up to 250-MHz performance
- Optional input and output registers
- Advanced I/O support
- High-speed differential I/O standard support, including LVDS, RSDS, mini-LVDS, LVPECL, differential HSTL, and differential SSTL
- Single-ended I/O standard support, including 2.5-V and 1.8-V, SSTL class I and II, 1.8-V and 1.5-V HSTL class I and II, 3.3-V PCI and PCI-X 1.0, 3.3-, 2.5-, 1.8-, and 1.5-V LVCMOS, and 3.3-, 2.5-, and 1.8-V LVTTL
- Peripheral Component Interconnect Special Interest Group (PCI SIG) PCI Local Bus Specification, Revision 3.0 compliance for 3.3-V operation at 33 or 66 MHz for 32- or 64-bit interfaces
- PCI Express with an external TI PHY and an Altera PCI Express ×1 Megacore® function
- 133-MHz PCI-X 1.0 specification compatibility
- High-speed external memory support, including DDR, DDR2, and SDR SDRAM, and QDRII SRAM supported by drop in Altera IP MegaCore functions for ease of use
- Three dedicated registers per I/O element (IOE): one input register, one output register, and one output-enable register
- Programmable bus-hold feature
- Programmable output drive strength feature
- Programmable delays from the pin to the IOE or logic array
- I/O bank grouping for unique VCCIO and/or VREF bank settings
- MultiVolt™ I/O standard support for 1.5-, 1.8-, 2.5-, and 3.3-interfaces
- Hot-socketing operation support
- Tri-state with weak pull-up on I/O pins before and during configuration
- Programmable open-drain outputs
- Series on-chip termination support
- (Continue .)
仕様
パラメータ | 価値 | パラメータ | 価値 |
---|---|---|---|
Rohs Code | No | Part Life Cycle Code | Active |
Ihs Manufacturer | INTEL CORP | Package Description | FBGA-672 |
Reach Compliance Code | compliant | HTS Code | 8542.39.00.01 |
Samacsys Manufacturer | Intel | Additional Feature | ALSO REQUIRES 3.3 SUPPLY |
Clock Frequency-Max | 402.5 MHz | JESD-30 Code | S-PBGA-B672 |
JESD-609 Code | e0 | Length | 27 mm |
Moisture Sensitivity Level | 3 | Number of CLBs | 2076 |
Number of Inputs | 475 | Number of Logic Cells | 33216 |
Number of Outputs | 459 | Number of Terminals | 672 |
Organization | 2076 CLBS | Package Body Material | PLASTIC/EPOXY |
Package Code | BGA | Package Equivalence Code | BGA672,26X26,40 |
Package Shape | SQUARE | Package Style | GRID ARRAY |
Programmable Logic Type | FIELD PROGRAMMABLE GATE ARRAY | Qualification Status | Not Qualified |
Seated Height-Max | 2.6 mm | Supply Voltage-Max | 1.25 V |
Supply Voltage-Min | 1.15 V | Supply Voltage-Nom | 1.2 V |
Surface Mount | YES | Technology | CMOS |
Terminal Finish | TIN LEAD | Terminal Form | BALL |
Terminal Pitch | 1 mm | Terminal Position | BOTTOM |
Width | 27 mm |
配送
配送タイプ | 配送料 | リードタイム | |
---|---|---|---|
![]() |
DHL | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
![]() |
フェデックス | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
![]() |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
![]() |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
![]() |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
![]() |
登録された航空便 | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
処理時間:送料は地域や国によって異なります。
支払い
支払条件 | ハンドフィー | |
---|---|---|
![]() |
電信送金 | 銀行手数料 US$30.00 を請求します。 |
![]() |
ペイパル | 4.0%のサービス料がかかります。 |
![]() |
クレジットカード | 3.5%のサービス料がかかります。 |
![]() |
ウエスタンユニオン | charge US.00 banking fee. |
![]() |
送金サービス | 銀行手数料は 0.00 米ドルかかります。 |
保証
1.購入した電子部品には365日保証が含まれており、製品の品質を保証します。
2.受け取った商品の一部が完璧な品質ではない場合、当社は責任を持って返金または交換を手配します。 ただし、商品は元の状態のままでなければなりません。
パッキング
-
ステップ1 :製品
-
ステップ2 :真空包装
-
ステップ3 :静電気防止袋
-
ステップ4 :個包装
-
ステップ5 :梱包箱
-
ステップ6 :バーコード配送タグ
すべての製品は静電気防止袋に梱包されます。 ESD 帯電防止保護を備えた状態で出荷されます。
社外の ESD 梱包ラベルには、部品番号、ブランド、数量などの当社の情報が使用されます。
私たちは出荷前にすべての商品を検査し、すべての製品が良好な状態であることを確認し、部品が新しいオリジナルでデータシートと一致していることを確認します。
すべての商品に問題がないことを確認した後、梱包後、安全に梱包し、グローバルエクスプレスで発送します。 優れた耐穿刺性と耐引裂性を示し、シールの完全性も良好です。
私たちは高品質の製品、思いやりのあるサービス、販売後の保証を提供します
-
豊富な商品を取り揃えておりますので、お客様の様々なニーズにお応え致します。
-
最小注文数量は1個からとなります。
-
最低国際配送料は0.00ドルから
-
全商品365日品質保証