Microchip DSPIC33FJ256MC710-I/PF
MCU 16-bit dsPIC RISC 256KB Flash 3.3V 100-Pin TQFP Tray / IC MCU 16BIT 256KB FLASH 100TQFP
ブランド: Microchip Technology, Inc
製造元部品 #: DSPIC33FJ256MC710-I/PF
データシート: DSPIC33FJ256MC710-I/PF Datasheet (PDF)
パッケージ/ケース: TQFP-100
製品の種類: 組み込みプロセッサ&コントローラ
DSPIC33FJ256MC710-I/PF 概要
IC, 16BIT MCU-DSP, 256KB FLASH, SMD; Product Range: dsPIC33F Series; Core Frequency: 40MHz; Flash Memory Size: 256KB; No. of I/O's: 85I/O's; Embedded Interface Type: ECAN, I2C, SPI, UART; Core Supply Voltage: 2.75V; DSC Case S
特徴
- Operating Conditions
- 3.0V to 3.6V, -40ºC to +150ºC, DC to 20 MIPS
- 3.0V to 3.6V, -40ºC to +125ºC, DC to 40 MIPS
- Qualification and Class B Support
- AEC-Q100 REVG (Grade 1 -40ºC to +125ºC)
- AEC-Q100 REVG (Grade 0 -40ºC to +150ºC)
- Class B Safety Library, IEC 6073
- Core: 16-bit dsPIC33F CPU
- Code-efficient (C and Assembly) architecture
- Two 40-bit wide accumulators
- Single-cycle (MAC/MPY) with dual data fetch
- Single-cycle mixed-sign MUL plus hardware divide
- Clock Management
- Programmable PLLs and oscillator clock sources
- Fail-Safe Clock Monitor (FSCM)
- Independent Watchdog Timer (WDT)
- Fast wake-up and start-up
- Power Management
- Low-power management modes (Sleep, Idle,Doze)
- Integrated Power-on Reset and Brown-out Reset
- 1.35 mA/MHz dynamic current (typical)
- 55 μA IPD current (typical)
- Motor Control PWM
- Up to four PWM generators with eight outputs
- Dead Time for rising and falling edges
- 12.5 ns PWM resolution
- PWM support for Motor Control: BLDC, PMSM, ACIM and SRM
- Programmable Fault inputs
- Flexible trigger for ADC conversions and configurations
- Advanced Analog Features
- Two ADC modules
- Configurable as 10-bit, 1.1 Msps with four S&H or 12-bit,500 ksps with one S&H
- 18 analog inputs on 64-pin devices and up to
- 32 analog inputs on 100-pin devices
- Flexible and independent ADC trigger sources
- Timers/Output Compare/Input Capture
- Up to nine 16-bit timers/counters. Can pair up to make four 32-bit timers
- Eight Output Compare modules configurable as
- timers/counters
- Eight Input Capture modules
- Communication Interfaces
- Two UART modules (10 Mbps)
- Support for LIN 2.0 protocols and IrDA®
- Two 4-wire SPI modules (15 Mbps)
- Up to two I2C™ modules (up to 1 Mbaud) with SMBus support
- Up to two Enhanced CAN (ECAN) modules (1 Mbaud) with 2.0B support
- Quadrature Encoder Interface (QEI) module
- Data Converter Interface (DCI) module with I2S codec support
- Input/Output
- 5V-tolerant pins
- Selectable open drain, pull-ups, and pull-downs
- Up to 5 mA overvoltage clamp current
- External interrupts on all I/O pins
仕様
パラメータ | 価値 | パラメータ | 価値 |
---|---|---|---|
Manufacturer | Microchip Technology | Product Category | Embedded - Microcontrollers |
Series | dsPIC 33F | Packaging | Tray Alternate Packaging |
Package-Case | 100-TQFP | Operating-Temperature | -40°C ~ 85°C (TA) |
Supplier-Device-Package | 100-TQFP (14x14) | Number-of-I-O | 85 |
Speed | 40 MIPs | EEPROM-Size | - |
Core-Processor | dsPIC | RAM-Size | 30K x 8 |
Program-Memory-Type | FLASH | Peripherals | Brown-out Detect/Reset, DMA, Motor Control PWM, QEI, POR, PWM, WDT |
Connectivity | CAN, I2C, IrDA, LIN, SPI, UART/USART | Voltage-Supply-Vcc-Vdd | 3 V ~ 3.6 V |
Core-Size | 16-Bit | Program-Memory-Size | 256KB (256K x 8) |
Data-Converters | A/D 24x10b/12b | Oscillator-Type | Internal |
Tags | dsPIC33FJ256MC710-I, dsPIC33FJ256MC7, dsPIC33FJ256M, dsPIC33FJ2, dsPIC33FJ, dsPIC33F, dsPIC33, dsPIC3, dsPIC, dsPI, DSP | Mfr | Microchip Technology |
Package | Tray | Product Status | Active |
Programmabe | Verified | Core Processor | dsPIC |
Core Size | 16-Bit | Number of I/O | 85 |
Program Memory Size | 256KB (256K x 8) | Program Memory Type | FLASH |
EEPROM Size | - | RAM Size | 30K x 8 |
Voltage - Supply (Vcc/Vdd) | 3V ~ 3.6V | Data Converters | A/D 24x10/12b |
Oscillator Type | Internal | Operating Temperature | -40°C ~ 85°C (TA) |
Mounting Type | Surface Mount | Package / Case | 100-TQFP |
Supplier Device Package | 100-TQFP (14x14) |
配送
配送タイプ | 配送料 | リードタイム | |
---|---|---|---|
DHL | $20.00-$40.00 (0.50 KG) | 2-5 日々 | |
フェデックス | $20.00-$40.00 (0.50 KG) | 2-5 日々 | |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 日々 | |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 日々 | |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 日々 | |
登録された航空便 | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
処理時間:送料は地域や国によって異なります。
支払い
支払条件 | ハンドフィー | |
---|---|---|
電信送金 | 銀行手数料 US$30.00 を請求します。 | |
ペイパル | 4.0%のサービス料がかかります。 | |
クレジットカード | 3.5%のサービス料がかかります。 | |
ウエスタンユニオン | charge US.00 banking fee. | |
送金サービス | 銀行手数料は 0.00 米ドルかかります。 |
保証
1.購入した電子部品には365日保証が含まれており、製品の品質を保証します。
2.受け取った商品の一部が完璧な品質ではない場合、当社は責任を持って返金または交換を手配します。 ただし、商品は元の状態のままでなければなりません。
パッキング
-
ステップ1 :製品
-
ステップ2 :真空包装
-
ステップ3 :静電気防止袋
-
ステップ4 :個包装
-
ステップ5 :梱包箱
-
ステップ6 :バーコード配送タグ
すべての製品は静電気防止袋に梱包されます。 ESD 帯電防止保護を備えた状態で出荷されます。
社外の ESD 梱包ラベルには、部品番号、ブランド、数量などの当社の情報が使用されます。
私たちは出荷前にすべての商品を検査し、すべての製品が良好な状態であることを確認し、部品が新しいオリジナルでデータシートと一致していることを確認します。
すべての商品に問題がないことを確認した後、梱包後、安全に梱包し、グローバルエクスプレスで発送します。 優れた耐穿刺性と耐引裂性を示し、シールの完全性も良好です。
パーツポイント
-
The dsPIC33FJ256MC710-I/PF is a high-performance 16-bit microcontroller from Microchip Technology. It features a 16-bit data path, 40 MIPS performance, up to 256 KB of flash memory, and a variety of communication peripherals. The chip is commonly used in embedded control applications requiring high performance and digital signal processing capabilities.
-
Equivalent
Some equivalent products of DSPIC33FJ256MC710-I/PF chip are DSPIC33FJ256MC710A-I/PF and DSPIC33FJ256MC710T-I/PF. They are also part of the dsPIC33FJ series of 16-bit microcontrollers from Microchip Technology. -
Features
Some features of DSPIC33FJ256MC710-I/PF include 16-bit MCU/DSP core, 16 KB RAM, 256 KB Flash memory, 16-bit ADC, and motor control peripherals. It also has integrated communication peripherals like UART, SPI, and I2C, making it suitable for advanced embedded control applications. -
Pinout
The DSPIC33FJ256MC710-I/PF is a 64-pin microcontroller with enhanced features for digital signal processing. It features 256 KB of flash memory, 30 KB of RAM, and multiple communication interfaces. The pins serve various functions including GPIO, PWM, ADC, SPI, I2C, UART, and more for a wide range of applications. -
Manufacturer
The manufacturer of the DSPIC33FJ256MC710-I/PF is Microchip Technology Inc. It is an American semiconductor company that specializes in microcontroller, mixed-signal, and analog semiconductors. It is known for providing solutions for a wide range of applications in various industries including automotive, industrial, consumer, and communication sectors. -
Application Field
The DSPIC33FJ256MC710-I/PF is commonly used in motor control, power management, and digital power supply applications. Its high performance and integrated peripherals make it ideal for applications requiring precise control and monitoring of power systems, such as electric vehicles, industrial automation, and renewable energy systems. -
Package
The DSPIC33FJ256MC710-I/PF chip is available in a 64-pin TQFP (Thin Quad Flat Package) package. The form of the chip is surface mount. The size of the package is 10mm x 10mm.
データシート PDF
私たちは高品質の製品、思いやりのあるサービス、販売後の保証を提供します
-
豊富な商品を取り揃えておりますので、お客様の様々なニーズにお応え致します。
-
最小注文数量は1個からとなります。
-
最低国際配送料は0.00ドルから
-
全商品365日品質保証
Good pricing, but some of the components were not as durable as expected.