このウェブサイトは Cookie を使用しています。このサイトを使用すると、Cookie の使用に同意したことになります。詳細については、こちらをご覧くださいプライバシーポリシー.

画像は参考用です。製品仕様を参照してください。

注文金額が

$5000

得る $50 割引 !

TI DS26C32ATMX

Name: DS26C32ATMX
Rating: 4.5 (10 reviews)

This quad receiver is ideal for applications requiring reliable and high-speed data transmission, thanks to its RS-422/RS-423 compatibility

ブランド: Texas Instruments

製造元部品 #: DS26C32ATMX

データシート: DS26C32ATMX データシート (PDF)

パッケージ/ケース: SOIC-Narrow-16

製品の種類: Drivers, Receivers, Transceivers

RoHS ステータス:

在庫状況: 6,626 個、新しいオリジナル

Warranty: 1 Year Ovaga Warranty - Find Out More

簡単な見積もり

RFQを提出してください DS26C32ATMX またはメールでご連絡ください: メール: [email protected], 12時間以内にご連絡させていただきます。

数量^*

メール^*

連絡先名^*

会社

述べる

DS26C32ATMX 概要

A standout in its category, the DS26C32ATMX serves as a quad differential line receiver designed to excel in the transmission of digital data over balanced lines. Its wide voltage range, typically between ±7V and ±14V, renders it suitable for a diverse range of applications. Boasting high-speed capabilities, it is capable of managing data rates up to 20 Mbps, making it an ideal fit for high-speed communication systems. The device's typical input hysteresis of 35 mV ensures noise immunity and reliable signal reception, while its thermal shutdown protection safeguards it against excessive temperatures. Its small package size and low power consumption make it a perfect fit for space-constrained and energy-efficient designs. The DS26C32ATMX is commonly employed in industrial automation, telecommunications, and networking applications where dependable differential signaling is vital for data transmission over long distances

特徴

16 E1, T1, or J1 Short/Long-Haul Line Interface Units
Independent E1, T1 or J1 Selections
Fully Internal Impedance Match Requires No External Resistors
Software-Selectable Transmit and ReceiveSide Impedance Match
Crystal-Less Jitter Attenuator
Selectable Single-Rail and Dual-Rail Mode and AMI or HDB3/B8ZS Line Encoding and Decoding
Detection and Generation of AIS
Digital/Analog Loss of Signal Detection as per T1.231, G.775 and ETS 300 233
External Master Clock Can Be Multiple of 2.048MHz or 1.544MHz for T1/J1 or E1 Operation; This Clock Will Be Internally Adapted for T1 or E1 Usage
Receiver Signal Level Indicator from -2.5dB to -38dB in T1 Mode and -3dB to -43dB in E1 Mode in 2.5dB Increments
Two Built-In BERT Testers for Diagnostics
8-Bit Parallel Interface Support for Intel or Motorola Mode or a 4-Wire Serial Interface
Transmit Short-Circuit Protection
G.772 Nonintrusive Monitoring
Receive Monitor Mode Handles Combinations of 14dB to 30dB of Resistive Attenuation Along with 12dB to 30dB of Cable Attenuation
Specification Compliance to the Latest T1 and E1 Standards—ANSI T1.102, AT&T Pub 62411, T1.231, T1.403, ITU-T G.703, G.742, G.775, G.823, ETS 300 166, and ETS 300 233
Single 3.3V Supply with 5V Tolerant I/O
JTAG Boundary Scan as Per IEEE 1149.1

仕様

パラメータ	価値	パラメータ	価値
Manufacturer	Texas Instruments	Product Category	RS-422 Interface IC
RoHS	N	Mounting Style	SMD/SMT
Package / Case	SOIC-Narrow-16	Series	DS26C32AT
Number of Receivers	4 Receiver	Supply Voltage - Max	5.5 V
Supply Voltage - Min	4.5 V	Operating Supply Current	23 mA
Minimum Operating Temperature	- 40 C	Maximum Operating Temperature	+ 85 C
Brand	Texas Instruments	Operating Supply Voltage	5 V
Product Type	RS-422 Interface IC	Factory Pack Quantity	2500
Subcategory	Interface ICs

配送

	配送料	リードタイム
DHL	$20.00-$40.00 (0.50 KG)	2-5 日々
フェデックス	$20.00-$40.00 (0.50 KG)	2-5 日々
UPS	$20.00-$40.00 (0.50 KG)	2-5 日々
TNT	$20.00-$40.00 (0.50 KG)	2-5 日々
EMS	$20.00-$40.00 (0.50 KG)	2-5 日々
登録された航空便	$20.00-$40.00 (0.50 KG)	2-5 日々

処理時間：送料は地域や国によって異なります。

支払い

支払条件		ハンドフィー
	電信送金	銀行手数料 US$30.00 を請求します。
	ペイパル	4.0％のサービス料がかかります。
	クレジットカード	3.5％のサービス料がかかります。
	ウエスタンユニオン	charge US.00 banking fee.
	送金サービス	銀行手数料は 0.00 米ドルかかります。

保証

1.購入した電子部品には365日保証が含まれており、製品の品質を保証します。

2.受け取った商品の一部が完璧な品質ではない場合、当社は責任を持って返金または交換を手配します。ただし、商品は元の状態のままでなければなりません。

パッキング

ステップ1 :製品
ステップ2 :真空包装
ステップ3 :静電気防止袋
ステップ4 :個包装
ステップ5 :梱包箱
ステップ6 :バーコード配送タグ

すべての製品は静電気防止袋に梱包されます。 ESD 帯電防止保護を備えた状態で出荷されます。

社外の ESD 梱包ラベルには、部品番号、ブランド、数量などの当社の情報が使用されます。

私たちは出荷前にすべての商品を検査し、すべての製品が良好な状態であることを確認し、部品が新しいオリジナルでデータシートと一致していることを確認します。

すべての商品に問題がないことを確認した後、梱包後、安全に梱包し、グローバルエクスプレスで発送します。優れた耐穿刺性と耐引裂性を示し、シールの完全性も良好です。

パーツポイント

The DS26C32ATMX chip is a quad differential line receiver that converts balanced signals into TTL/CMOS levels. It is commonly used in industrial and communication applications where high noise immunity and long-distance data transmission are required. The chip provides high-speed and high-impedance differential inputs, making it suitable for various data communication protocols.
Equivalent

The DS26C32ATMX is a quad differential line driver chip. Equivalent products include the DS26LS32AC, DS26LS32CM, DS26LS32CN, DS26LS32MJ, and DS26LS32MW. These chips are high-speed CMOS compatible devices with the same functionality as the DS26C32ATMX.
Features

The DS26C32ATMX is a quad differential line receiver with enhanced ESD protection, designed to meet the requirements of RS-422 and RS-485 systems. It features a wide common-mode input range, high differential input voltage thresholds, and is equipped with a failsafe circuit to ensure a known output state when inputs are idle.
Pinout

The DS26C32ATMX is a 16-pin quad differential line driver. It is used for converting TTL/CMOS level signals into differential outputs for long-distance transmission. It provides complementary output pairs with control inputs for precise signal shaping.
Manufacturer

The manufacturer of the DS26C32ATMX is Texas Instruments Incorporated. It is a globally recognized semiconductor manufacturing company that designs and manufactures integrated circuits, including specialized digital signal processing, analog, and mixed-signal chips. Texas Instruments produces a wide range of electronic components used in various industries, including automotive, consumer electronics, telecommunications, and industrial equipment.
Application Field

The DS26C32ATMX is commonly used in applications where high-speed communication and noise immunity are crucial, such as data communication systems, industry-standard RS-422/RS-485 networks, and digital signal transmission in harsh environments.
Package

The DS26C32ATMX chip is available in SOIC (Small Outline Integrated Circuit) package. The form is surface mount, and the size is typically 0.25" x 0.37" x 0.07" (6.35mm x 9.4mm x 1.75mm).