注文金額が
$5000ADI DS2413P+T&R
Interface - Specialized 1-Wire Dual Channel Addressable Switch
![ISO14001](/img/about/iso14001.png)
![ISO9001](/img/about/iso9001.png)
![DUNS](/img/about/duns.png)
ブランド: Analog Devices, Inc
製造元部品 #: DS2413P+T&R
データシート: DS2413P+T&R データシート (PDF)
パッケージ/ケース: TSOC-6
製品の種類: Specialized ICs
DS2413P+T&R 概要
The DS2413 is a dual-channel programmable I/O 1-Wire® chip. The PIO outputs are configured as open-drain and provide up to 20mA continuous sink capability and off-state operating voltage up to 28V. Control and sensing of the PIO pins is performed with a dedicated device-level command protocol. To provide a high level of fault tolerance in the end application, the 1-Wire I/O and PIO pins are all capable of withstanding continuous application of voltages up to 28V max. Communication and operation of the DS2413 is performed with the single contact Maxim 1-Wire serial interface.
特徴
- Controls Dual Programmable High Voltage, High Current I/O Port Pins from a Single Micro Port Pin
- Open-Drain Programmable I/O Pins Support 20mA max Continuous Current Sink
- 28V (max) PIO Pin Operating Voltage
- On-Resistance of PIO Pulldown Transistor 20Ω max; OFF Resistance 1MΩ min
- Parasitic Power Supply Through 1-Wire
- Minimalist 1-Wire Interface Lowers Cost and Interface Complexity
- Communicates to Host with a Single Digital Signal at 14.9kb or 100kbps
- Switchpoint Hysteresis and Filtering to Optimize Performance in the Presence of Noise
- 1-Wire IO Pin Supports 28V Absolute Maximum DC Level for Fault Conditions
- Unique 64-bit ROM Serial Number Factory Lasered Into Each Device
- High ESD Immunity of 1-Wire IO Pin: 8kV HBM Typical
- TSOC and TDFN Packages Available
- Wide Voltage and Temperature Operating Ranges Enables Robust System Performance
- 2.8V to 5.25V
- 0°C to +70°C
応用
- Accessory Identification and Control
- General Purpose Input/Output
- Industrial Controllers
- Key-Pick Systems
- LED Control
- System Monitoring
仕様
パラメータ | 価値 | パラメータ | 価値 |
---|---|---|---|
Pin Count | 6 | Package Category | Other |
Released Date | Jun 1, 2023 |
配送
配送タイプ | 配送料 | リードタイム | |
---|---|---|---|
![]() |
DHL | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
![]() |
フェデックス | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
![]() |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
![]() |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
![]() |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
![]() |
登録された航空便 | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
処理時間:送料は地域や国によって異なります。
支払い
支払条件 | ハンドフィー | |
---|---|---|
![]() |
電信送金 | 銀行手数料 US$30.00 を請求します。 |
![]() |
ペイパル | 4.0%のサービス料がかかります。 |
![]() |
クレジットカード | 3.5%のサービス料がかかります。 |
![]() |
ウエスタンユニオン | charge US.00 banking fee. |
![]() |
送金サービス | 銀行手数料は 0.00 米ドルかかります。 |
保証
1.購入した電子部品には365日保証が含まれており、製品の品質を保証します。
2.受け取った商品の一部が完璧な品質ではない場合、当社は責任を持って返金または交換を手配します。 ただし、商品は元の状態のままでなければなりません。
パッキング
-
ステップ1 :製品
-
ステップ2 :真空包装
-
ステップ3 :静電気防止袋
-
ステップ4 :個包装
-
ステップ5 :梱包箱
-
ステップ6 :バーコード配送タグ
すべての製品は静電気防止袋に梱包されます。 ESD 帯電防止保護を備えた状態で出荷されます。
社外の ESD 梱包ラベルには、部品番号、ブランド、数量などの当社の情報が使用されます。
私たちは出荷前にすべての商品を検査し、すべての製品が良好な状態であることを確認し、部品が新しいオリジナルでデータシートと一致していることを確認します。
すべての商品に問題がないことを確認した後、梱包後、安全に梱包し、グローバルエクスプレスで発送します。 優れた耐穿刺性と耐引裂性を示し、シールの完全性も良好です。
私たちは高品質の製品、思いやりのあるサービス、販売後の保証を提供します
-
豊富な商品を取り揃えておりますので、お客様の様々なニーズにお応え致します。
-
最小注文数量は1個からとなります。
-
最低国際配送料は0.00ドルから
-
全商品365日品質保証