画像は参考用です。製品仕様を参照してください。
注文金額が
$5000Infineon BTS114A
BTS114A: Power Field-Effect Transistor
ブランド: Infineon
製造元部品 #: BTS114A
データシート: BTS114A Datasheet (PDF)
パッケージ/ケース: TO-220-3
製品の種類: Single FETs, MOSFETs
BTS114A 概要
The BTS114A is a high-side power switch manufactured by Infineon Technologies. It is a smart power switch that combines protective and diagnostic functions with a power section. The switch is designed for automotive and industrial applications, offering protection features such as over-temperature shutdown, over-voltage protection, and short-circuit protection. The BTS114A has a wide input voltage range of 6 V to 34 V and can handle a continuous current of up to 6 A. It also features a diagnostic output that provides information on the status of the device, allowing for easy monitoring of the system.The switch is controlled by a logic input pin that allows for simple on/off control. It also has a very low standby current consumption, making it suitable for use in battery-operated applications.The BTS114A comes in a TO-220 package, making it easy to integrate into existing systems. Its compact size and robust design make it suitable for use in harsh environments.
特徴
- Designed for automotive applications
- PNP resistor for interface circuit and driver circuits
- Four quadrant operation
- No trigger or diode network required for inductive loads
- High immunity against false triggering
- Isolation to avoid false triggering between channels
応用
- Automotive systems
- Motor control applications
- Industrial automation systems
- High-side power switches
- Electronic switching applications
- Home appliances
仕様
| パラメータ | 価値 | パラメータ | 価値 |
|---|---|---|---|
| Product Category | MOSFET | RoHS | N |
| Technology | Si | Mounting Style | Through Hole |
| Package / Case | TO-220-3 | Transistor Polarity | N-Channel |
| Number of Channels | 1 Channel | Vds - Drain-Source Breakdown Voltage | 50 V |
| Id - Continuous Drain Current | 6.7 A | Rds On - Drain-Source Resistance | 100 mOhms |
| Vgs - Gate-Source Voltage | - 20 V, + 20 V | Minimum Operating Temperature | - 55 C |
| Maximum Operating Temperature | + 150 C | Pd - Power Dissipation | 50 W |
| Channel Mode | Enhancement | Series | BTS114 |
| Brand | Infineon Technologies | Configuration | Single |
| Fall Time | 40 ns | Height | 15.65 mm |
| Length | 10 mm | Product Type | MOSFET |
| Rise Time | 40 ns | Factory Pack Quantity | 500 |
| Subcategory | MOSFETs | Transistor Type | 1 N-Channel |
| Typical Turn-Off Delay Time | 55 ns | Typical Turn-On Delay Time | 20 ns |
| Width | 4.4 mm | Part # Aliases | SP000011191 BTS114ANKSA1 |
| Unit Weight | 0.068784 oz |
配送
| 配送タイプ | 配送料 | リードタイム | |
|---|---|---|---|
 |
DHL | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
 |
フェデックス | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
 |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
 |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
 |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
 |
登録された航空便 | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
処理時間：送料は地域や国によって異なります。
支払い
| 支払条件 | ハンドフィー | |
|---|---|---|
 |
電信送金 | 銀行手数料 US$30.00 を請求します。 |
 |
ペイパル | 4.0％のサービス料がかかります。 |
 |
クレジットカード | 3.5％のサービス料がかかります。 |
 |
ウエスタンユニオン | charge US.00 banking fee. |
 |
送金サービス | 銀行手数料は 0.00 米ドルかかります。 |
保証
1.購入した電子部品には365日保証が含まれており、製品の品質を保証します。
2.受け取った商品の一部が完璧な品質ではない場合、当社は責任を持って返金または交換を手配します。 ただし、商品は元の状態のままでなければなりません。
パッキング
-
![製品]( "製品")
ステップ1 :製品
-
![真空包装]( "真空包装")
ステップ2 :真空包装
-
![静電気防止袋]( "静電気防止袋")
ステップ3 :静電気防止袋
-
![個包装]( "個包装")
ステップ4 :個包装
-
![梱包箱]( "梱包箱")
ステップ5 :梱包箱
-
![バーコード配送タグ]( "バーコード配送タグ")
ステップ6 :バーコード配送タグ
すべての製品は静電気防止袋に梱包されます。 ESD 帯電防止保護を備えた状態で出荷されます。
社外の ESD 梱包ラベルには、部品番号、ブランド、数量などの当社の情報が使用されます。
私たちは出荷前にすべての商品を検査し、すべての製品が良好な状態であることを確認し、部品が新しいオリジナルでデータシートと一致していることを確認します。
すべての商品に問題がないことを確認した後、梱包後、安全に梱包し、グローバルエクスプレスで発送します。 優れた耐穿刺性と耐引裂性を示し、シールの完全性も良好です。
パーツポイント
-
The BTS114A is a high-side power switch in a PG-TO-252-5 package, capable of providing a maximum current of 5 A. It offers overload and thermal protection, as well as a status output signal. This chip is commonly used in automotive applications for controlling resistive, capacitive, or inductive loads.
-
Equivalent
Some equivalent products of the BTS114A chip include the BTS117 and BTS118 chips from Infineon Technologies. These devices are also high-side power switch ICs designed for automotive and industrial applications, offering similar features and performance as the BTS114A chip. -
Features
BTS114A is a high-side power switch with integrated control circuit and N-channel vertical power FET. It has overcurrent, overvoltage, and thermal protection. It can handle load currents up to 0.5A and supply voltages up to 34V. It is ideal for automotive and industrial applications. -
Pinout
The BTS114A is a single-channel high-side power switch with a 2-pin configuration. Pin 1 is the input from the microcontroller, and pin 2 is the power output to the load. The device is used for controlling high-current loads in automotive and industrial applications. -
Manufacturer
The BTS114A is a product from Infineon Technologies AG, a German semiconductor manufacturer. Infineon is a leading company in the field of power semiconductors, providing a wide range of innovative solutions for automotive, industrial, and consumer electronics applications. -
Application Field
The BTS114A is commonly used in automotive applications for controlling resistive, inductive, and capacitive loads such as fuel pumps, heaters, and motors. It is also used in industrial and consumer electronics applications where high current switching is required, such as power supplies, relays, and solenoids. -
Package
The BTS114A chip comes in a TO-220 package type, with a through-hole form which is mounted on a PCB. It typically measures 10mm x 11mm x 3.5mm in size.
データシート PDF
私たちは高品質の製品、思いやりのあるサービス、販売後の保証を提供します
-
![製品]( "製品")
豊富な商品を取り揃えておりますので、お客様の様々なニーズにお応え致します。
-
![quantity]( "quantity")
最小注文数量は1個からとなります。
-
![shipping]( "shipping")
最低国際配送料は0.00ドルから
-
![保証]( "保証")
全商品365日品質保証
