このウェブサイトは Cookie を使用しています。このサイトを使用すると、Cookie の使用に同意したことになります。詳細については、こちらをご覧くださいプライバシーポリシー.

画像は参考用です。製品仕様を参照してください。

注文金額が

$5000

得る $50 割引 !

Microchip ATSAMC21G18A-AZT

Name: ATSAMC21G18A-AZT
Brand: Microchip Technology, Inc
Rating: 4.8 (10 reviews)

5-Volt 32-Bit ARM Cortex M0+ MCU with CAN-FD.

ブランド: Microchip Technology, Inc

製造元部品 #: ATSAMC21G18A-AZT

データシート: ATSAMC21G18A-AZT データシート (PDF)

パッケージ/ケース: TQFP

RoHS ステータス:

在庫状況: 1,500 個、新しいオリジナル

Warranty: 1 Year Ovaga Warranty - Find Out More

簡単な見積もり

RFQを提出してください ATSAMC21G18A-AZT またはメールでご連絡ください: メール: [email protected], 12時間以内にご連絡させていただきます。

数量^*

メール^*

連絡先名^*

会社

述べる

ATSAMC21G18A-AZT 概要

The Microchip SAM C series of 5V Cortex M0+ devices is designed for industrial and commercial applications in noisy environments. These products feature robust communications peripherals including the SERCOM module and CAN-FD, along with advanced motor control peripherals, and the Peripheral Touch Control (PTC) for developing robust user interfaces.

Available as a 64Mhz Device

Supported by MPLAB X IDE and MPLAB Harmony.

Functional Safety

This device supports the ISO 26262 (ASIL B), IEC 61508 (SIL 2/3) and IEC 60730 (Class B) functional safety standards.

· The Functional Safety Manual, FMEDA and information on the Diagnostic Software are available under NDA through the request form on the 32-bit Microcontrollers Functional Safety web page.

. To request any information about the SIL 2/3 STL, please fill out and submit the request form on Industrial Safety Self-Test Library web page.

· Learn more about 32-bit MCUs with Functional Safety capabilities including device hardware and certified software libraries.

特徴

ARM Cortex-M0+ CPU running at up to 64MHz

Single-cycle hardware multiplier

Micro Trace Buffer

Memory Protection Unit (MPU)

256KB in-system self-programmable Flash

8KB independent self-programmable Flash for EEPROM emulation

32KB SRAM Main Memory

Power-on reset (POR) and brown-out detection (BOD)

Internal and external clock options with 48MHz to 96MHz

Fractional Digital Phase Locked Loop (FDPLL96M)

16 external interrupts

One non-maskable interrupt

Two-pin Serial Wire Debug (SWD) programming, test and debugging interface

Idle, standby, and off sleep modes

SleepWalking peripherals

Hardware Divide and Square Root Accelerator (DIVAS)

12-channel Direct Memory Access Controller (DMAC)

12-channel Event System

Up to eight 16-bit Timer/Counters (TC), configurable as either

One 16-bit TC with compare/capture channels

One 8-bit TC with compare/capture channels

One 32-bit TC with compare/capture channels, by using two TCs

Up to four compare channels with optional complementary output

Generation of synchronized pulse width modulation (PWM) pattern across port pins

Deterministic fault protection, fast decay and configurable dead-time between complementary outputs

Dithering that increase resolution with up to 5 bit and reduce quantization error

Frequency Meter

32-bit Real Time Counter (RTC) with clock/calendar function

Watchdog Timer (WDT)

CRC-32 generator

CAN 2.0A/B

ISO CAN FD; ISO 1189801:2015

Each CAN interface have two selectable pin locations to switch between two external CAN transceivers (without the need for an external switch)

USART with full-duplex and single-wire half-duplex configuration

I2C up to 3.4MHz (Except SERCOM6 and SERCOM7)

SPI

LIN master/slave

RS-485

PMBus

Four Configurable Custom Logic (CCL)

Differential and single-ended input

Automatic offset and gain error compensation

Oversampling and decimation in hardware to support 13-, 14-, 15- or 16-bit resolution

One 16-bit Sigma-Delta Analog-to-Digital Converter (SDADC) with up to 2 differential channels

10-bit, 350ksps Digital-to-Analog Converter (DAC)

Four Analog Comparators (AC) with window compare function

Integrated Temperature Sensor

Peripheral Touch Controller (PTC)

256-Channel capacitive touch and proximity sensing I/O

Up to 38 programmable I/O pins

Drop in compatible with select SAM D20 and SAM D21

2.7V – 5.5V

仕様

パラメータ	価値	パラメータ	価値
Part Family	SAMC21	CPU Type	Cortex-M0+
MaxSpeed (MHz)	64	SRAM (KB)	32
Temp. Range Min.	-40	Temp. Range Max.	125
Operation Voltage Min.(V)	2.7	Operation Voltage Max.(V)	5.5
SPI	6 -SPI	I2C	6
UART	6	Crypto Engine	No
Internal Oscillator	32khz, 32Khz ULP, 48Mhz	Pin Count	48
Secure Boot	No	Package Category	Quad Flat Packages
Released Date	Dec 4, 2020

配送

	配送料	リードタイム
DHL	$20.00-$40.00 (0.50 KG)	2-5 日々
フェデックス	$20.00-$40.00 (0.50 KG)	2-5 日々
UPS	$20.00-$40.00 (0.50 KG)	2-5 日々
TNT	$20.00-$40.00 (0.50 KG)	2-5 日々
EMS	$20.00-$40.00 (0.50 KG)	2-5 日々
登録された航空便	$20.00-$40.00 (0.50 KG)	2-5 日々

処理時間：送料は地域や国によって異なります。

支払い

支払条件		ハンドフィー
	電信送金	銀行手数料 US$30.00 を請求します。
	ペイパル	4.0％のサービス料がかかります。
	クレジットカード	3.5％のサービス料がかかります。
	ウエスタンユニオン	charge US.00 banking fee.
	送金サービス	銀行手数料は 0.00 米ドルかかります。