このウェブサイトは Cookie を使用しています。このサイトを使用すると、Cookie の使用に同意したことになります。詳細については、こちらをご覧くださいプライバシーポリシー.

画像は参考用です。製品仕様を参照してください。

Microchip ATSAM4E16EA-AU

Name: ATSAM4E16EA-AU
Rating: 4.5 (6 reviews)

ARM® Cortex®-M4 SAM4E Microcontroller IC 32-Bit Single-Core 120MHz 1MB (1M x 8) FLASH 144-LQFP (20x20)

ブランド: Microchip Technology, Inc

製造元部品 #: ATSAM4E16EA-AU

データシート: ATSAM4E16EA-AU Datasheet (PDF)

パッケージ/ケース: LQFP-144

RoHS ステータス:

在庫状況: 3960 個、新しいオリジナル

製品の種類: 組み込みプロセッサ＆コントローラ

Warranty: 1 Year Ovaga Warranty - Find Out More

価格設定

*すべての価格は米ドルです

数量	単価	外部価格
1	$4.670	$4.670
10	$4.564	$45.640
30	$4.491	$134.730
100	$4.420	$442.000

In Stock:3960 PCS

- +

簡単な見積もり

RFQを提出してください ATSAM4E16EA-AU またはメールでご連絡ください: Eメール: [email protected], 12時間以内にご連絡させていただきます。

量^*

Eメール^*

連絡先^*

会社

述べる

ATSAM4E16EA-AU 概要

For New Designs, we highly recommend to consider Revision B for Prototypes and Production.

ARM® Cortex®-M4 processor-based microcontroller (MCU), the SAM4E16E features a floating point unit and a high data bandwidth architecture and is targeted at industrial automation and building control applications.

The device embeds 1MB Flash and features multiple networking/connectivity peripherals, including two 2.0A/B compatible CAN interfaces and an IEEE Std 1588-compatible 10/100Mbps Ethernet MAC. Additional communication interfaces include a FS USB device, a HS SDCard/SDIO/MMC interface, USARTs, SPIs and multiple TWIs.

Analog features include dual 1Msps, 16-bit ADCs of up to 24 channels with analog front end offering offset and gain error correction, and a 2-channel, 1Msps, 12-bit DAC.

The SAM4E16E is available in 144-pin BGA and QFP package options.

特徴

ARM Cortex-M4 with 2 Kbytes Cache running at up to 120 MHz
Memory Protection Unit (MPU)
DSP Instructions, Floating Point Unit (FPU), Thumb®-2 instruction set
1024 Kbytes Embedded Flash
128 Kbytes Embedded SRAM
16 Kbytes ROM with Embedded Boot Loader Routines (UART) and IAP Routines
Static Memory Controller (SMC): SRAM, NOR, NAND Support
NAND Flash Controller
Embedded voltage regulator for single-supply operation
Power-on-Reset (POR), Brown-out Detector (BOD) and Dual Watchdog for Safe Operation
Quartz or ceramic resonator oscillators: 3 to 20 MHz with clock failure detection and 32.768 kHz for RTT or system clock
RTC with Gregorian and Persian Calendar Mode, Waveform Generation in Backup mode
RTC counter calibration circuitry compensates for 32.768 kHz crystal frequency inaccuracy
High-precision 8/16/24 MHz factory-trimmed internal RC oscillator. In-application trimming access for frequency adjustment
Slow clock internal RC oscillator as permanent low-power mode device clock
One PLL up to 240 MHz for Device Clock and for USB
Temperature Sensor
Low-power tamper detection on two inputs, anti-tampering by immediate clear of general-purpose backup registers (GPBR)
Up to 2 Peripheral DMA Controllers (PDC) with up to 33 Channels
One 4-channel DMA Controller
Sleep, Wait and Backup modes, down to 0.9 μA in Backup mode with RTC, RTT, and GPBR
144-ball LFBGA, 10x10 mm, pitch 0.8 mm
144-lead LQFP, 20x20 mm, pitch 0.5 mm
Revision A - Industrial (-40° C to +85° C), Revision B -(-40° C to +105° C)
Two USARTs with USART1 (ISO7816, IrDA®, RS-485, SPI, Manchester and Modem Modes)
USB 2.0 Device: Full Speed (12 Mbits), 2668 byte FIFO, up to 8 Endpoints. On-chip Transceiver
Two 2-wire UARTs
Two 2-wire Interfaces (TWI)
High-speed Multimedia Card Interface (SDIO/SD Card/MMC)
One Master/Slave Serial Peripheral Interface (SPI) with Chip Select Signals
Three 3-channel 32-bit Timer/Counter blocks with Capture, Waveform, Compare and PWM Mode. Quadrature Decoder Logic and 2-bit Gray Up/Down Counter for Stepper Motor.
32-bit low-power Real-time Timer (RTT) and low-power Real-time Clock (RTC) with calendar and alarm features
256-bit General Purpose Backup Registers (GPBR)
One Ethernet MAC (GMAC) 10/100 Mbps in MII mode only with dedicated DMA and Support for IEEE1588, Wake-on-LAN
Two CAN Controllers with eight Mailboxes
4-channel 16-bit PWM with Complementary Output, Fault Input, 12-bit Dead Time Generator Counter for Motor Control.
Real-time Event Management
Up to 117 I/O Lines with External Interrupt Capability (Edge or Level Sensitivity), Debouncing, Glitch Filtering
Bidirectional Pad, Analog I/O, Programmable Pull-up/Pull-down
Five 32-bit Parallel Input/Output Controllers, Peripheral DMA Assisted Parallel Capture Mode
AES 256-bit Key Algorithm compliant with FIPS Publication 197
AFE (Analog Front End): 2x16-bit ADC, up to 24-channels, Differential Input Mode, Programmable Gain Stage, Auto Calibration and Automatic Offset Correction
One 2-channel 12-bit 1 Msps DAC
One Analog Comparator with Flexible Input Selection, Selectable Input Hysteresis
Serial Wire/JTAG Debug Port(SWJ-DP)
Debug access to all memories and registers in the system, including Cortex-M4 register bank when the core is running, halted, or held in reset.
Serial Wire Debug Port (SW-DP) and Serial Wire JTAG Debug Port (SWJ-DP) debug access.
Flash Patch and Breakpoint (FPB) unit for implementing breakpoints and code patches.
Data Watchpoint and Trace (DWT) unit for implementing watchpoints, data tracing, and system profiling.
Instrumentation Trace Macrocell (ITM) for support of printf style debugging.
IEEE1149.1 JTAG Boundary-scan on all digital pins.
ASF-Atmel software Framework – SAM software development framework
Integrated in the Atmel Studio IDE with a graphical user interface or available as standalone for GCC, IAR compilers.
DMA support, Interrupt handlers Driver support
USB, TCP/IP, Wi-Fi and Bluetooth, Numerous USB classes, DHCP and Wi-Fi encryption Stacks
RTOS integration, FreeRTOS is a core component

仕様

パラメータ	価値	パラメータ	価値
Source Content uid	ATSAM4E16EA-AU	Pbfree Code	Yes
Rohs Code	Yes	Part Life Cycle Code	Active
Ihs Manufacturer	MICROCHIP TECHNOLOGY INC	Package Description	LQFP-144
Reach Compliance Code	compliant	ECCN Code	5A992.C
HTS Code	8542.31.00.01	Samacsys Manufacturer	Microchip
Has ADC	YES	Address Bus Width	24
Bit Size	32	Boundary Scan	YES
CPU Family	CORTEX-M4F	Clock Frequency-Max	20 MHz
DAC Channels	YES	DMA Channels	YES
External Data Bus Width	8	Format	FLOATING POINT
Integrated Cache	YES	JESD-30 Code	S-PQFP-G144
JESD-609 Code	e3	Length	20 mm
Low Power Mode	YES	Number of DMA Channels	33
Number of I/O Lines	117	Number of Serial I/Os	2
Number of Terminals	144	Number of Timers	3
On Chip Data RAM Width	8	On Chip Program ROM Width	8
Operating Temperature-Max	85 °C	Operating Temperature-Min	-40 °C
PWM Channels	YES	Package Body Material	PLASTIC/EPOXY
Package Code	LFQFP	Package Equivalence Code	QFP144,.87SQ,20
Package Shape	SQUARE	Package Style	FLATPACK, LOW PROFILE, FINE PITCH
Qualification Status	Not Qualified	RAM (bytes)	131072
RAM (words)	32768	ROM (words)	1048576
ROM Programmability	FLASH	Seated Height-Max	1.6 mm
Speed	120 MHz	Supply Voltage-Max	1.32 V
Supply Voltage-Min	1.08 V	Supply Voltage-Nom	1.2 V
Surface Mount	YES	Technology	CMOS
Temperature Grade	INDUSTRIAL	Terminal Finish	Matte Tin (Sn) - annealed
Terminal Form	GULL WING	Terminal Pitch	0.5 mm
Terminal Position	QUAD	Width	20 mm
uPs/uCs/Peripheral ICs Type	MICROCONTROLLER, RISC	Pin Count	144
Package Category	Quad Flat Packages	Released Date	Sep 28, 2015
Last Modified Date	Mar 7, 2023 4:10 PM UTC

配送

	配送料	リードタイム
DHL	$20.00-$40.00 (0.50 KG)	2-5 日々
フェデックス	$20.00-$40.00 (0.50 KG)	2-5 日々
UPS	$20.00-$40.00 (0.50 KG)	2-5 日々
TNT	$20.00-$40.00 (0.50 KG)	2-5 日々
EMS	$20.00-$40.00 (0.50 KG)	2-5 日々
登録された航空便	$20.00-$40.00 (0.50 KG)	2-5 日々

処理時間：送料は地域や国によって異なります。

支払い

支払条件		ハンドフィー
	電信送金	銀行手数料 US$30.00 を請求します。
	ペイパル	4.0％のサービス料がかかります。
	クレジットカード	3.5％のサービス料がかかります。
	ウエスタンユニオン	charge US.00 banking fee.
	送金サービス	銀行手数料は 0.00 米ドルかかります。

保証

1.購入した電子部品には365日保証が含まれており、製品の品質を保証します。

2.受け取った商品の一部が完璧な品質ではない場合、当社は責任を持って返金または交換を手配します。ただし、商品は元の状態のままでなければなりません。

パッキング

ステップ1 :製品
ステップ2 :真空包装
ステップ3 :静電気防止袋
ステップ4 :個包装
ステップ5 :梱包箱
ステップ6 :バーコード配送タグ

すべての製品は静電気防止袋に梱包されます。 ESD 帯電防止保護を備えた状態で出荷されます。

社外の ESD 梱包ラベルには、部品番号、ブランド、数量などの当社の情報が使用されます。

私たちは出荷前にすべての商品を検査し、すべての製品が良好な状態であることを確認し、部品が新しいオリジナルでデータシートと一致していることを確認します。

すべての商品に問題がないことを確認した後、梱包後、安全に梱包し、グローバルエクスプレスで発送します。優れた耐穿刺性と耐引裂性を示し、シールの完全性も良好です。

パーツポイント

The ATSAM4E16EA-AU is a high-performance microcontroller chip designed by Atmel for industrial applications. It features a 120 MHz ARM Cortex-M4 processor, advanced peripherals, and a wide range of connectivity options. This chip is ideal for applications requiring high processing power and extensive connectivity capabilities.
Equivalent

Some equivalent products of ATSAM4E16EA-AU chip are ATSAM4E8EA-AU, ATSAM4DC32C-AN, and ATSAM4DC32A-AN. These chips offer similar features and capabilities, making them suitable alternatives for designing embedded systems with similar requirements.
Features

1. 32-bit Cortex-M4 microcontroller 2. Operating frequency up to 120 MHz 3. 1 MB of flash memory and 128 KB of SRAM 4. Advanced peripherals including USB, CAN, Ethernet, and multiple UART, SPI, and I2C interfaces 5. Low power consumption with sleep modes and power-down features
Pinout

The ATSAM4E16EA-AU is a 144-pin microcontroller with functions including 16-bit external bus interface, USB, CAN, LCD controller, and up to 1MB of flash memory. It is part of the SAM4E series by Microchip, suitable for industrial and consumer applications.
Manufacturer

The ATSAM4E16EA-AU is manufactured by Microchip Technology Inc., a company specializing in semiconductor and microcontroller technology. They provide products and solutions for various industries, including automotive, communication, and consumer markets.
Application Field

The ATSAM4E16EA-AU microcontroller is commonly used in applications such as industrial control systems, home automation, smart energy management, and automotive electronics. It is suitable for environments that require high-performance processing capabilities, low power consumption, and advanced connectivity features.
Package

The ATSAM4E16EA-AU chip is a QFP package type, with a 100-pin form factor. The size of the chip is 14 mm x 14 mm.