注文金額が
$5000AT90USB1286-16MU
Featuring a MO-220 form factor, the AT90USB1286-16MU is a green CMOS RISC microcontroller with FLASH memory
![ISO14001](/img/about/iso14001.png)
![ISO9001](/img/about/iso9001.png)
![DUNS](/img/about/duns.png)
ブランド: Microchip Technology
製造元部品 #: AT90USB1286-16MU
データシート: AT90USB1286-16MU データシート (PDF)
パッケージ/ケース: QFN-64
製品の種類: Microcontrollers
AT90USB1286-16MU 概要
When it comes to USB connectivity, the AT90USB1286-16MU microcontroller stands out as a reliable and versatile solution. With 128KB of flash memory, 8KB of SRAM, and 4KB of EEPROM, it offers ample storage for data and program requirements. Its 16MHz user-selectable clock and USB 2.0 full-speed device ensure efficient processing and speedy data transfer, while the inclusion of 4 flexible communication modules, 5-channel 10-bit ADC, and 6 PWM channels further enrich its capabilities. Whether it's for USB peripherals, keyboards, mice, or other USB-connected devices, this microcontroller provides the essential features and performance needed for seamless integration and operation. Its support for various communication interfaces, along with low power consumption, makes it a suitable choice for a wide range of USB-connected applications
特徴
- High Performance, Low Power AVR® 8-Bit Microcontroller
- Advanced RISC Architecture
- – 135 Powerful Instructions – Most Single Clock Cycle Execution
- – 32 x 8 General Purpose Working Registers
- – Fully Static Operation
- – Up to 16 MIPS Throughput at 16 MHz
- – On-Chip 2-cycle Multiplier
- Non-volatile Program and Data Memories
- – 64/128K Bytes of In-System Self-Programmable Flash
- Endurance: 100,000 Write/Erase Cycles
- – Optional Boot Code Section with Independent Lock Bits
- In-System Programming by On-chip Boot Program hardware activated after
- reset
- True Read-While-Write Operation
- – 2K/4K (64K/128K Flash version) Bytes EEPROM
- Endurance: 100,000 Write/Erase Cycles
- – 4K/8K (64K/128K Flash version) Bytes Internal SRAM
- – Up to 64K Bytes Optional External Memory Space
- – Programming Lock for Software Security
- JTAG (IEEE std. 1149.1 compliant) Interface
- – Boundary-scan Capabilities According to the JTAG Standard
- – Extensive On-chip Debug Support
- – Programming of Flash, EEPROM, Fuses, and Lock Bits through the JTAG Interface
- USB 2.0 Full-speed/Low-speed Device and On-The-Go Module
- – Complies fully with:
- – Universal Serial Bus Specification REV 2.0
- – On-The-Go Supplement to the USB 2.0 Specification Rev 1.0
- – Supports data transfer rates up to 12 Mbit/s and 1.5 Mbit/s
- USB Full-speed/Low Speed Device Module with Interrupt on Transfer Completion
- – Endpoint 0 for Control Transfers : up to 64-bytes
- – 6 Programmable Endpoints with IN or Out Directions and with Bulk, Interrupt or
- Isochronous Transfers
- – Configurable Endpoints size up to 256 bytes in double bank mode
- – Fully independant 832 bytes USB DPRAM for endpoint memory allocation
- – Suspend/Resume Interrupts
- – Power-on Reset and USB Bus Reset
- – 48 MHz PLL for Full-speed Bus Operation
- – USB Bus Disconnection on Microcontroller Request
- USB OTG:
- – Supports Host Negotiation Protocol (HNP) and Session Request Protocol (SRP)
- for OTG dual-role devices
- – Provide Status and control signals for software implementation of HNP and SRP
- – Provides programmable times required for HNP and SRP
- Peripheral Features
- – Two 8-bit Timer/Counters with Separate Prescaler and Compare Mode
- – Two16-bit Timer/Counter with Separate Prescaler, Compare- and Capture Mode
- – Real Time Counter with Separate Oscillator
- – Two 8-bit PWM Channels
- – Six PWM Channels with Programmable Resolution from 2 to 16 Bits
- – Output Compare Modulator
- – 8-channels, 10-bit ADC
- – Programmable Serial USART
- – Master/Slave SPI Serial Interface
- – Byte Oriented 2-wire Serial Interface
- – Programmable Watchdog Timer with Separate On-chip Oscillator
- – On-chip Analog Comparator
- – Interrupt and Wake-up on Pin Change
- Special Microcontroller Features
- – Power-on Reset and Programmable Brown-out Detection
- – Internal Calibrated Oscillator
- – External and Internal Interrupt Sources
- – Six Sleep Modes: Idle, ADC Noise Reduction, Power-save, Power-down, Standby, and Extended Standby
- I/O and Packages
- – 48 Programmable I/O Lines
- – 64-lead TQFP and 64-lead QFN
- Operating Voltages
- – 2.7 - 5.5V
- – 2.2 - 5.5V (Check availabilty)
- Operating temperature
- – Industrial (-40°C to +85°C)
- Maximum Frequency
- – 8 MHz at 2.7V - Industrial range
- – 16 MHz at 4.5V - Industrial range
仕様
パラメータ | 価値 | パラメータ | 価値 |
---|---|---|---|
Rohs Code | Yes | Part Life Cycle Code | Transferred |
Ihs Manufacturer | ATMEL CORP | Part Package Code | QFN |
Package Description | HVQCCN, LCC64,.35SQ,20 | Pin Count | 64 |
Reach Compliance Code | compliant | HTS Code | 8542.31.00.01 |
Core Architecture | AVR | Device Core | AVR |
Clock Speed | 16 | Ram | 8 |
Flash Memory | 128 | Can | 0 |
Adc Channels | 8 | Adc Resolution | 10 |
Samacsys Manufacturer | Microchip | Has ADC | YES |
Additional Feature | ALSO OPERATES AT 1.8V MINIMUM SUPPLY | Address Bus Width | 16 |
Bit Size | 8 | Clock Frequency-Max | 16 MHz |
DAC Channels | NO | DMA Channels | NO |
External Data Bus Width | 8 | JESD-30 Code | S-XQCC-N64 |
Length | 9 mm | Number of I/O Lines | 48 |
Number of Terminals | 64 | On Chip Program ROM Width | 16 |
Operating Temperature-Max | 85 °C | Operating Temperature-Min | -40 °C |
PWM Channels | YES | Package Body Material | UNSPECIFIED |
Package Code | HVQCCN | Package Equivalence Code | LCC64,.35SQ,20 |
Package Shape | SQUARE | Package Style | CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE |
Power Supplies | 3/5 V | Qualification Status | Not Qualified |
RAM (bytes) | 8192 | ROM (words) | 65536 |
ROM Programmability | FLASH | Seated Height-Max | 1 mm |
Speed | 16 MHz | Supply Current-Max | 30 mA |
Supply Voltage-Max | 5.5 V | Supply Voltage-Min | 4.5 V |
Supply Voltage-Nom | 5 V | Surface Mount | YES |
Technology | CMOS | Temperature Grade | INDUSTRIAL |
Terminal Form | NO LEAD | Terminal Pitch | 0.5 mm |
Terminal Position | QUAD | Width | 9 mm |
uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
配送
配送タイプ | 配送料 | リードタイム | |
---|---|---|---|
![]() |
DHL | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
![]() |
フェデックス | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
![]() |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
![]() |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
![]() |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
![]() |
登録された航空便 | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
処理時間:送料は地域や国によって異なります。
支払い
支払条件 | ハンドフィー | |
---|---|---|
![]() |
電信送金 | 銀行手数料 US$30.00 を請求します。 |
![]() |
ペイパル | 4.0%のサービス料がかかります。 |
![]() |
クレジットカード | 3.5%のサービス料がかかります。 |
![]() |
ウエスタンユニオン | charge US.00 banking fee. |
![]() |
送金サービス | 銀行手数料は 0.00 米ドルかかります。 |
保証
1.購入した電子部品には365日保証が含まれており、製品の品質を保証します。
2.受け取った商品の一部が完璧な品質ではない場合、当社は責任を持って返金または交換を手配します。 ただし、商品は元の状態のままでなければなりません。
パッキング
-
ステップ1 :製品
-
ステップ2 :真空包装
-
ステップ3 :静電気防止袋
-
ステップ4 :個包装
-
ステップ5 :梱包箱
-
ステップ6 :バーコード配送タグ
すべての製品は静電気防止袋に梱包されます。 ESD 帯電防止保護を備えた状態で出荷されます。
社外の ESD 梱包ラベルには、部品番号、ブランド、数量などの当社の情報が使用されます。
私たちは出荷前にすべての商品を検査し、すべての製品が良好な状態であることを確認し、部品が新しいオリジナルでデータシートと一致していることを確認します。
すべての商品に問題がないことを確認した後、梱包後、安全に梱包し、グローバルエクスプレスで発送します。 優れた耐穿刺性と耐引裂性を示し、シールの完全性も良好です。
私たちは高品質の製品、思いやりのあるサービス、販売後の保証を提供します
-
豊富な商品を取り揃えておりますので、お客様の様々なニーズにお応え致します。
-
最小注文数量は1個からとなります。
-
最低国際配送料は0.00ドルから
-
全商品365日品質保証