注文金額が
$5000ON AMIS41682CANM1RG
5V CAN Interface IC LS Transceiver
AMIS41682CANM1RG 概要
The new AMIS-41682 and AMIS-41683 are interfaces between the protocol controller and the physical wires of the bus lines in a control area network (CAN). AMIS-41683 is identical to the AMIS-41682 but has a true 3.3V digital interface to the CAN controller. The device provides differential transmit capability but will switch in error conditions to a single-wire transmitter and or receiver. Initially it will be used for low speed applications, up to 125kBaud, in passenger cars.
Both AMIS-41682 and AMIS-41683 are implemented in I2T100 technology enabling both high-voltage analog circuitry and digital functionality to co-exist on the same chip.
These products consolidate the expertise of ON Semiconductor for in-car multiples transceivers and support together with 0REMX-002-XTP (VAN), AMIS-30660 and AMIS-30663 (CAN high speed) and AMIS-30600 (LIN) another widely used physical layer.
特徴
- Fully compatible with ISO11898-3 standard
- Very low electromagnetic emission (EME)
- Fully integrated receiver filters
- Permanent monitoring of transmit data input
- High electromagnetic susceptibility (EMS) in normal- and low-power modes
- In the event of bus failure, automatic switching to single-wire mode
- The device will automatically reset to differential mode if the bus failure is removed
- During failure modes there is full wake-up capability
- Un-powered nodes do not disturb bus lines
- Bus errors and thermal shutdown activation is flagged on ERRB pin
- Short circuit proof to battery and ground
- Thermal protection
- The bus lines are protected against transients in an automotive environment
- Support for low power modes
- Low current sleep and standby mode
- Power-on flag on the output
- Two-edge sensitive wake-up input signal via pin WAKEB
応用
- Automotive
仕様
パラメータ | 価値 | パラメータ | 価値 |
---|---|---|---|
Status | Last Shipments | Compliance | PbAHP |
Package Type | SOIC-14 | Case Outline | 751AP |
MSL Type | 2 | MSL Temp (°C) | 260 |
Container Type | REEL | Container Qty. | 3000 |
ON Target | N | Data Transmission Standard | CAN |
Number of Drivers | 1 | Number of Receivers | 1 |
VCC Min (V) | 4.75 | VCC Max (V) | 5.25 |
Pricing ($/Unit) | Price N/A |
配送
配送タイプ | 配送料 | リードタイム | |
---|---|---|---|
DHL | $20.00-$40.00 (0.50 KG) | 2-5 日々 | |
フェデックス | $20.00-$40.00 (0.50 KG) | 2-5 日々 | |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 日々 | |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 日々 | |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 日々 | |
登録された航空便 | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
処理時間:送料は地域や国によって異なります。
支払い
支払条件 | ハンドフィー | |
---|---|---|
電信送金 | 銀行手数料 US$30.00 を請求します。 | |
ペイパル | 4.0%のサービス料がかかります。 | |
クレジットカード | 3.5%のサービス料がかかります。 | |
ウエスタンユニオン | charge US.00 banking fee. | |
送金サービス | 銀行手数料は 0.00 米ドルかかります。 |
保証
1.購入した電子部品には365日保証が含まれており、製品の品質を保証します。
2.受け取った商品の一部が完璧な品質ではない場合、当社は責任を持って返金または交換を手配します。 ただし、商品は元の状態のままでなければなりません。
パッキング
-
ステップ1 :製品
-
ステップ2 :真空包装
-
ステップ3 :静電気防止袋
-
ステップ4 :個包装
-
ステップ5 :梱包箱
-
ステップ6 :バーコード配送タグ
すべての製品は静電気防止袋に梱包されます。 ESD 帯電防止保護を備えた状態で出荷されます。
社外の ESD 梱包ラベルには、部品番号、ブランド、数量などの当社の情報が使用されます。
私たちは出荷前にすべての商品を検査し、すべての製品が良好な状態であることを確認し、部品が新しいオリジナルでデータシートと一致していることを確認します。
すべての商品に問題がないことを確認した後、梱包後、安全に梱包し、グローバルエクスプレスで発送します。 優れた耐穿刺性と耐引裂性を示し、シールの完全性も良好です。
私たちは高品質の製品、思いやりのあるサービス、販売後の保証を提供します
-
豊富な商品を取り揃えておりますので、お客様の様々なニーズにお応え致します。
-
最小注文数量は1個からとなります。
-
最低国際配送料は0.00ドルから
-
全商品365日品質保証