注文金額が
$5000ADI AD592CN
Temp Sensor Analog 3-Pin TO-92 Tray
ブランド: Analog Devices, Inc
製造元部品 #: AD592CN
データシート: AD592CN データシート (PDF)
パッケージ/ケース: TO-92
製品の種類: 温度センサ
AD592CN 概要
The AD592 is a two terminal monolithic integrated circuit temperature transducer that provides an output current proportional to absolute temperature. For a wide range of supply voltages the transducer acts as a high impedance temperature dependent current source of 1 µA/K. Improved design and laser wafer trimming of the IC's thin film resistors allows the AD592 to achieve absolute accuracy levels and nonlinearity errors previously unattainable at a comparable price. The AD592 can be employed in applications between −25°C and +105°C where conventional temperature sensors (i.e., thermistor, RTD, thermocouple, diode) are currently being used. The inherent low cost of a monolithic integrated circuit in a plastic package, combined with a low total parts count in any given application, make the AD592 the most cost effective temperature transducer currently available. Expensive linearization circuitry, precision voltage references, bridge components, resistance measuring circuitry and cold junction compensation are not required with the AD592. Typical application areas include: appliance temperature sensing, automotive temperature measurement and control, HVAC (heating/ventilating/air conditioning) system monitoring, industrial temperature control, thermocouple cold junction compensation, board-level electronics temperature diagnostics, temperature readout options in instrumentation, and temperature correction circuitry for precision electronics. Particularly useful in remote sensing applications, the AD592 is immune to voltage drops and voltage noise over long lines due to its high impedance current output. AD592s can easily be multiplexed; the signal current can be switched by a CMOS multiplexer or the supply voltage can be enabled with a tri-state logic gate. The AD592 is available in three performance grades: the AD592AN, AD592BN and AD592CN. All devices are packaged in a plastic TO-92 case rated from −45°C to +125°C. Performance is specified from −25°C to +105°C. AD592 chips are also available, contact the factory for details.
仕様
パラメータ | 価値 | パラメータ | 価値 |
---|---|---|---|
feature-packaging | Tray | feature-rad-hard | |
feature-pin-count | 3 | feature-supplier-package | TO-92 |
feature-standard-package-name1 | TO | feature-cecc-qualified | No |
feature-esd-protection | feature-escc-qualified | ||
feature-military | No | feature-aec-qualified | No |
feature-aec-qualified-number | feature-auto-motive | No | |
feature-p-pap | No | feature-eccn-code | EAR99 |
feature-svhc | Yes |
配送
配送タイプ | 配送料 | リードタイム | |
---|---|---|---|
DHL | $20.00-$40.00 (0.50 KG) | 2-5 日々 | |
フェデックス | $20.00-$40.00 (0.50 KG) | 2-5 日々 | |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 日々 | |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 日々 | |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 日々 | |
登録された航空便 | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
処理時間:送料は地域や国によって異なります。
支払い
支払条件 | ハンドフィー | |
---|---|---|
電信送金 | 銀行手数料 US$30.00 を請求します。 | |
ペイパル | 4.0%のサービス料がかかります。 | |
クレジットカード | 3.5%のサービス料がかかります。 | |
ウエスタンユニオン | charge US.00 banking fee. | |
送金サービス | 銀行手数料は 0.00 米ドルかかります。 |
保証
1.購入した電子部品には365日保証が含まれており、製品の品質を保証します。
2.受け取った商品の一部が完璧な品質ではない場合、当社は責任を持って返金または交換を手配します。 ただし、商品は元の状態のままでなければなりません。
パッキング
-
ステップ1 :製品
-
ステップ2 :真空包装
-
ステップ3 :静電気防止袋
-
ステップ4 :個包装
-
ステップ5 :梱包箱
-
ステップ6 :バーコード配送タグ
すべての製品は静電気防止袋に梱包されます。 ESD 帯電防止保護を備えた状態で出荷されます。
社外の ESD 梱包ラベルには、部品番号、ブランド、数量などの当社の情報が使用されます。
私たちは出荷前にすべての商品を検査し、すべての製品が良好な状態であることを確認し、部品が新しいオリジナルでデータシートと一致していることを確認します。
すべての商品に問題がないことを確認した後、梱包後、安全に梱包し、グローバルエクスプレスで発送します。 優れた耐穿刺性と耐引裂性を示し、シールの完全性も良好です。
パーツポイント
-
The AD592CN is a two-terminal, monolithic integrated circuit temperature transducer. It provides an output current proportional to absolute temperature with a wide operating temperature range. It is commonly used in temperature sensing applications where high accuracy and stability are required.
-
Equivalent
Some equivalent products of AD592CN chip are LM35, LM335, TMP36, and AD590. These chips are all temperature sensors that provide analog output proportional to temperature. They can be used in various applications such as temperature measurement, thermal management, and temperature control systems. -
Features
The AD592CN is a two-terminal, temperature transducer in an 8-lead can package. It provides an output current proportional to absolute temperature with a linear scale factor of 1μA/K. It can measure temperatures from -55°C to +150°C. The device has a low impedance voltage output for versatility in remote sensing applications. -
Pinout
The AD592CN is a 14-pin temperature transducer IC. Pin functions are as follows: Pins 1 and 14 are the positive and negative power supply inputs, pin 7 is the temperature output, pins 2 and 6 serve as the reference temperature input, and pin 8 is the ground connection. -
Manufacturer
Analog Devices, Inc. is the manufacturer of the AD592CN. It is an American semiconductor company specializing in signal processing technology. Analog Devices designs and manufactures integrated circuits used in a variety of industries, including automotive, healthcare, and telecommunications. -
Application Field
The AD592CN is primarily used in temperature measurement and control applications, such as thermostats, industrial heating and cooling systems, and temperature monitoring in automotive, aerospace, and medical industries. It is also commonly used in data acquisition systems, environmental monitoring, and food processing applications. -
Package
The AD592CN chip comes in a ceramic dual in-line package (DIP). It is in the form of an integrated circuit (IC) and has a size of 8 pins.
私たちは高品質の製品、思いやりのあるサービス、販売後の保証を提供します
-
豊富な商品を取り揃えておりますので、お客様の様々なニーズにお応え致します。
-
最小注文数量は1個からとなります。
-
最低国際配送料は0.00ドルから
-
全商品365日品質保証