注文金額が
$5000
TI 5962-9471801Q2A
Buffer/Line Driver 8-CH Non-Inverting 3-ST BiCMOS 20-Pin CLLCC Tube
![ISO14001](/img/about/iso14001.png)
![ISO9001](/img/about/iso9001.png)
![DUNS](/img/about/duns.png)
ブランド: Texas Instruments
製造元部品 #: 5962-9471801Q2A
データシート: 5962-9471801Q2A データシート (PDF)
パッケージ/ケース: CLLCC
RoHS ステータス:
在庫状況: 5,438 個、新しいオリジナル
製品の種類: Buffers, Drivers, Receivers, Transceivers
Warranty: 1 Year Ovaga Warranty - Find Out More
0
1
*すべての価格は米ドルです
数量 | 単価 | 外部価格 |
---|---|---|
1 | $21.409 | $21.409 |
200 | $8.286 | $1657.200 |
500 | $7.994 | $3997.000 |
1000 | $7.850 | $7850.000 |
在庫あり: 5,438 PCS
5962-9471801Q2A 概要
The SN54ABT541 and SN74ABT541B octal buffers and line drivers are ideal for driving bus lines or buffering memory address registers. The devices feature inputs and outputs on opposite sides of the package to facilitate printed circuit board layout.
The 3-state control gate is a two-input AND gate with active-low inputs so that if either output-enable (OE1 or OE2) input is high, all eight outputs are in the high-impedance state.
When VCC is between 0 and 2.1 V, the device is in the high-impedance state during power up or power down. However, to ensure the high-impedance state above 2.1 V, OE should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
The SN54ABT541 is characterized for operation over the full military temperature range of -55°C to 125°C. The SN74ABT541B is characterized for operation from -40°C to 85°C.
特徴
- State-of-the-Art EPIC-IIB™ BiCMOS Design Significantly Reduces Power Dissipation
- Latch-Up Performance Exceeds 500 mA Per JEDEC Standard JESD-17
- Typical VOLP (Output Ground Bounce) < 1 V at VCC = 5 V, TA = 25°C
- High-Impedance State During Power Up and Power Down
- High-Drive Outputs (-32-mA IOH, 64-mA IOL)
- Package Options Include Plastic Small-Outline (DW), Shrink Small-Outline (DB), and Thin Shrink Small-Outline (PW) Packages, Ceramic Chip Carriers (FK), Ceramic Flat (W) Package, and Plastic (N) and Ceramic (J) DIPs
EPIC-IIB is a trademark of Texas Instruments.
仕様
パラメータ | 価値 | パラメータ | 価値 |
---|---|---|---|
Mfr | Texas Instruments | Series | * |
Package | Bulk | Product Status | Active |
Base Product Number | 5962-9471801 |
配送
配送タイプ | 配送料 | リードタイム | |
---|---|---|---|
![]() |
DHL | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
![]() |
フェデックス | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
![]() |
UPS | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
![]() |
TNT | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
![]() |
EMS | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
![]() |
登録された航空便 | $20.00-$40.00 (0.50 KG) | 2-5 日々 |
処理時間:送料は地域や国によって異なります。
支払い
支払条件 | ハンドフィー | |
---|---|---|
![]() |
電信送金 | 銀行手数料 US$30.00 を請求します。 |
![]() |
ペイパル | 4.0%のサービス料がかかります。 |
![]() |
クレジットカード | 3.5%のサービス料がかかります。 |
![]() |
ウエスタンユニオン | charge US.00 banking fee. |
![]() |
送金サービス | 銀行手数料は 0.00 米ドルかかります。 |
保証
1.購入した電子部品には365日保証が含まれており、製品の品質を保証します。
2.受け取った商品の一部が完璧な品質ではない場合、当社は責任を持って返金または交換を手配します。 ただし、商品は元の状態のままでなければなりません。
パッキング
-
ステップ1 :製品
-
ステップ2 :真空包装
-
ステップ3 :静電気防止袋
-
ステップ4 :個包装
-
ステップ5 :梱包箱
-
ステップ6 :バーコード配送タグ
すべての製品は静電気防止袋に梱包されます。 ESD 帯電防止保護を備えた状態で出荷されます。
社外の ESD 梱包ラベルには、部品番号、ブランド、数量などの当社の情報が使用されます。
私たちは出荷前にすべての商品を検査し、すべての製品が良好な状態であることを確認し、部品が新しいオリジナルでデータシートと一致していることを確認します。
すべての商品に問題がないことを確認した後、梱包後、安全に梱包し、グローバルエクスプレスで発送します。 優れた耐穿刺性と耐引裂性を示し、シールの完全性も良好です。
私たちは高品質の製品、思いやりのあるサービス、販売後の保証を提供します
-
豊富な商品を取り揃えておりますので、お客様の様々なニーズにお応え致します。
-
最小注文数量は1個からとなります。
-
最低国際配送料は0.00ドルから
-
全商品365日品質保証